ENGLISH • 9
APPLYING YOUR BLOOD PRESSURE CUFF
Before applying your blood pressure cu, be sure you have
selected the appropriate size cu:
Adult Cuff fits arm circumference 11”- 16.375” (27.9-41.7 cm)
If for any reason you are unable to or should not use your left arm,
please modify the instructions for cu application to your right
arm. Your physician can help you identify which arm is best for
you.
1. Remove any constrictive clothing or jewelry that may
interfere with cu placement.
2. Be seated at a table or desk with your feet at on the oor.
3. Extend your left arm. Find your brachial artery, which is at the
inner aspect (bend) of your elbow, Fig 1. You may be able to
feel your pulse. The artery patch should point to the brachial
artery when the cu is applied.
4. Open the cu creating a circle that you can slide your arm
into; do not extend the cu beyond the metal bar.
5. Insert your left arm into the cu. Position the bottom edge
of the cu approximately one-half inch ABOVE your elbow;
when taking your reading, the stethoscope chestpiece must
directly touch the inside of your arm, over your brachial artery.
6. With your arm extended, palm facing upward and tubes positioned down the center of
your arm, Fig 2-3, use your right hand to pull the end of the cu and secure the hook and
loop material. Make sure that the artery mark is still pointed to your brachial artery.
7. The cu should t comfortably, yet snugly around your arm. You should be able to insert
one nger easily between your arm and the cu.
If you are not comfortable with applying your cu, please seek the assistance of another
member of your household or work with your physician to practice the cu application.
Incorrectly applied cus may result in inaccurate readings.
Fig. 1
Fig. 2
Fig. 3
