Vertiv Liebert SmartAisle2 User manual

Liebert® SmartAisle2
User manual

Copyright by Vertiv Co. Ltd.
The content in this document is subject to change without notice. All rights, including rights of
translation, reproduced by printing, copying or similar methods, and even of parts, are reserved.
Violators will be liable for damages. All rights, including rights deriving from patent license or
registration of a utility model or design, are reserved. No part of this document may be reproduced
or transmitted in any form or by any means without the prior written consent of Vertiv Co. Ltd.
Notice
The purchased products, services, and features are stipulated by the contract made between Vertiv
Co., and the customer. All or part of the products, services, and features described in this document
may not be within the purchasing scope or the usage scope. Unless otherwise specified in the
contract, all statements, information, and recommendations in this document are provided "AS IS"
without warranties, guarantees or representations of any kind, either express or implied. The
information in this document is subject to change without notice. Every effort has been made in the
preparation of this document to ensure the accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute a warranty of any kind,
express or implied.
Vertiv Co., Ltd.
China
Website:www.vertivco.com
E-mail: [e-mail]
Customer service hotline: [phone]
Asia-Pacific
Homepage: www.vertivco.com
E-mail: [e-mail]
For Technical Support, users may contact the nearest Vertiv Co. local sales office or service center.

Styling used in the Guide
The styles used in this manual are defined in the following table:
Situation
Description
Warning/Danger/Caution
The Warning/Danger/Caution note indicates a hazardous or
potentially harmful situation that can result in death or
injury. It also indicates instructions that need to be adhered
to, failing which may result in danger and safety issues,
thereby having an adverse effect on the reliability of the
device and security. Even for practices not related to physical
injury, the content under the Warning heading is used for
precautions which need to be taken which, otherwise, could
result in equipment damage, performance degradation, or
interruption in service.
Note
The Note section indicates additional and useful information,
including tips and tweaks. It also calls attention to best
practices and industry-best protocols that are standardized
and help make maximum utilization of the resources at
hand. Helpful information related to the mainstream content
also comes under the Note heading helping the users get to
grips with the definitions, concepts, and terminologies used
in the manual.
Version History
Issue
Revision Date
BOM
Changes
1.0
=
---

Safety Precautions & Measures
In this section, the safety measures related to the entire SmartCabinet™ unit will be explained in
detail.
Read the manual prior to installation and operation of the unit. Only qualified personnel
should move, install, or service this equipment.
The user reads and takes into account all the precautions, compliance, and safety measures
before working on the equipment. The unit control must be used exclusively for the purpose
which it is intended for; the manufacturer takes no liability for incorrect use or a
modification to the unit control.
Please read this manual carefully before installing, maintaining and troubleshooting;
especially the Warning/ Danger/ Caution information in the User Guide. Apart from the User
Guide, also pay attention to the warning labels on the unit and its components.
This manual is retained for the entire service life of the machine. The user must read all the
precautions, danger, warnings, and cautionary measures mentioned in the manual prior to carrying
out any operations on the machine.
Adhere to all the notes, warnings, cautions, potential dangers, and precautions mentioned in the
manual. Read this manual before carrying out any operation on the unit.
The Warnings/Danger/Cautions/Precautions/Notes do not represent the entire safety points to be
observed and only supplementary in nature. This product is tailored for industrial, commercial, or other
professional units (such as manufacturing, electrical, and instrumentation setups) and not meant for
purposes related wholly to individuals without the credentials. The purpose of the design is well defined
and therefore, the manufacturers do not assume any responsibility for any incorrect usage. Strict
adherence to the norms and usage should be observed. In case of any improper use or modifications,
the warranty will be void; handle with care, especially the key to the product must be allocated to the
service personnel responsible for maintenance.
General Safety Instructions
Use the tools with an insulation handle.
Wear rubber gloves and safety shoes.
Avoid placing tools and metal objects on the battery surface
Remove the watches, rings, or any metal objects.

Only after all the power is disconnected, operate on the inner components of the product.
Before operating on the inner components for any maintenance, you must switch off the
mains breaker and all UPS power.
After an alarm occurs through product monitoring platform, the need for timely find the
cause, treatment failure, to avoid more trouble, damage.
Risk of electric shock
There is a risk of an electric shock which may lead to personnel injury or death: To prevent or avoid
such a situation, the following points must be taken into account:
Disconnect the control box and remote power supplies prior to working on the product.
Local codes, regulations, and protocols may vary from region to region. Therefore, adhere
to all these local protocols and rules prior to installing, operating, or servicing of the
machine.
Read all the instructions, ensure that all the parts and components are included, and check
the nameplate to ascertain that the voltage matches the available mains; Proceed with the
installation, maintenance, troubleshooting, and operating on the machine only after going
through the preceding steps.
This product is suitable only for the TT and TN type power grid; it doesn’t apply to the IT
type power grid.
Finally, read all the labels on the unit and its components before operating on those
components during installation and maintenance. The warnings and cautionary measures
mentioned in this manual are supplementary and therefore, the measures listed on the
labels of the components and the unit must be considered strictly before any operation.

PART I
Introducing SmartAisle

1 Introduction
SmartAisle2 is an intelligent, integrated infrastructure in a self-contained line-up solution that is
easy to deploy and tailored for large data centers and computer rooms. All data centers have
distinct operation and business objectives. Balancing the data center practices for capacity, space
utilization, availability, and efficiency has been tedious owing to the ever-increasing demand in the
IT space.
Enter SmartAisle2 –an enclosed complete data center solution (referred to as SmartAisle) in an
indoor environment. With Precision cooling, UPS, power management, monitoring and control
technologies and fire suppression integrated into a holistic enclosed system, this smart solution is
ideally suited for environments where dedicated IT room improvements are neither practical nor
cost-effective. It is flexible as it can be placed unobtrusively into workspaces without the clutter or
bulk associated with these kinds of solutions. It is highly effective, economical, interoperable, and
makes use of the existing infrastructure or whitespace, avoids expensive room upgrades along with
the optional fire suppression system- all in one enclosed solution. This top-notch modular
enterprise-grade solution is unique and brings together industry-best practices and latest
technologies to enable streamlined management in a compact footprint.
It is an ideal solution tailored for 19” rack hardware device, including servers, voice data, the
internet network equipment, cabinets, closure assembly and power supply, cooling, monitoring
equipment, equipment for bearer cabinets and is best suited for large data centers.
1.1 Configuration Specification for SmartAisle
The typical configuration of the SmartAisle solution is shown in Table 1-1.
Table 1-1 Configuration
Parameter
Specifications
Size
Corridor width
1200mm
Machine external dimensions
See Section 1.5.3
Overall key
indicators
Density levels
Low-density
Power Architecture
Centralized power supply
Cooling architecture
Air cooled DX based row cooling units,
independent cooling modules
Structured Cabling
Column header network wiring closet
Fire architecture
External fire, borrow building
The total number of U-bit single
module
966 (single cabinet 42U, including the
network cabinet)
Redundant power supply
2N
The average power consumption of
a single cabinet
4kW
IT power consumption single
module
92kW
Single refrigeration module
105kW
Altitude
Less than 1000m (air conditioning derating
more than 1000m)

Mounting
Raised floor or ground installation
Voltage
standard
Voltage
(380 ~ 415) Vac ± 10%, 3N ~
frequency
50Hz / 60Hz
Colour
Pantone 877C + RAL7021
1.2 Salient Features
SmartAisle has several distinct features that make it an outstanding utility for mid-tier and large
data centers.
Efficiency
Close control of precision air cooling with an exact match with the thermal load using a variable
capacity system that provides focussed cooling with high energy savings
Intelligent Monitoring
Enables supervision and management of the environment, equipment, electric doors, roof and
alarm linkage intelligent control system in a centralized manner for the administrator.
Convenient Operations & Maintenance
Use of electric door anti-pinch safety and access control systems improves the user comfort and
safety experience.
Security Management
Use of electric doors and roof-emergency response system that enables enhanced security
feature.
Intelligent Lighting
The integrated 3-color bright lights, set display, illumination and easy-to-understand interface
to facilate appropriate space lighting needs.
Human Machine Interface
A 15-inch large control panel which is quite intuitive and advanced enables administrators and
facility managers to visualize the entire system operation in real time

1.3 Appearance and Components
The bifurcation of all components that constitute the SmartAisle solution is depicted in the
following figure (Refer Figure 1-1);
Figure 1-1 SmartAisle layout diagram
1
Base
2
Server Cabinet
3
Network Cabinet
4
Access door
5
Top Plate
6
A/C Column
7
Distribution Cabinet
8
Strong wire passage groove
9
Power cable trunking; copper
and fibre cable tray
11
Control panel

Configuration of Components
The Base enables achieving a common ground to mount the entire machine equipment,
eliminating the need to set up static flooring and providing pipeline space.
The cabinet is an ideal utility for 19 "rack-mount hardware, including servers, voice, data,
Internet, and other network equipment.
Closure assembly (Access door & Roof) enables achieving closure of the hot and cold aisles,
personnel access control, and linkage opening function.
Lighting provides an environment within the channel display, operation, and maintenance
of lighting and warning prompts.
A Bridge from the distribution cabinet helps realize the connection related to the capacity
of the network cabinet to the circuit between the enclosure management functions.
Distribution cabinet power distribution equipment enables achieving the functionality to
provide 19” rack-mount hardware.
Refrigerant equipment helps realize a 19” rack mount hardware cooling.
Monitoring device enables achieving the USMS (meaning supervision of Power, Cooling
Temperature, Humidity, Water, and Leakage) equipment monitoring and control linkage.
Local Display helps administrators or the concerned facility managers by presenting
information to achieve the overall capacity, 2D and 3D temperature fields, alarms, and PUE
to name a few.
1.4 Environmental Requirements
1.4.1 Operating conditions
The installation site of the SmartAisle should be such that the product is away from heat and
environments where there is a presence of easy-to-produce sparks, direct sunlight, corrosive gases,
and organic solvents