Verus Engineering Wing Riser 991 GT3 Manual

GT3 Wing Riser –991 GT3
Install Manual
A big thank you goes out to Flat 6 Motorsports for putting this install manual together for us.
Author: Clay Warner
Release Date: 2022/12/14
Approvals:E. Hazen
Document Revisions
Rev
Date
Author
Description
01
2022/12/14
C. Warner
Initial release of install manual
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]

2 12/14/2022
Author: Clay Warner
Date: 2022/12/14
Recipients: Public
ENGINEERING | NORTH AMERICA
REVISION: R01
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]
Wing Riser 991 GT3 –Install Manual
CONTENTS
1. Introduction.................................................................................................................................... <3>
1.1. Overview................................................................................................................................. <3>
1.2. Difficulty..................................................................................................................................<3>
1.3. Time Required.........................................................................................................................<3>
1.4. Tools Needed .......................................................................................................................... <3>
1.5. Rear Wing Riser Components ................................................................................................. <3>
2. Rear Wing Riser Install...............................................................................................................<4-11>

3 12/14/2022
Author: Clay Warner
Date: 2022/12/14
Recipients: Public
ENGINEERING | NORTH AMERICA
REVISION: R01
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]
Wing Riser 991 GT3 –Install Manual
1. Introduction
1.1. Overview: Detailed instructions on installing the Verus Engineering Rear Wing Risers on the
991 GT3.
1.2. Difficulty: Easy
1.3. Time Required: 1 hour
1.4. Tools Needed:
1.4.1. Socket Wrench
1.4.2. T40 Socket
1.4.3. 5mm HEX
1.4.4. Microfiber
1.4.5. Plastic Pick
1.5. Rear Wing Mount Components
1.5.1. (1) Left-Hand Wing Riser
1.5.2. (1) Right-Hand Wing Riser

4 12/14/2022
Author: Clay Warner
Date: 2022/12/14
Recipients: Public
ENGINEERING | NORTH AMERICA
REVISION: R01
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]
Wing Riser 991 GT3 –Install Manual
2. 991 GT3 Rear Wing Riser Install
2.1. Verus Engineering is not responsible for damage to you or your vehicle by following this
manual and/or installing Verus Engineering products.
2.2. Note: It is highly recommended to have a helper for this installation.
2.3. Open the trunk and disconnect the 3rd brake light cable

5 12/14/2022
Author: Clay Warner
Date: 2022/12/14
Recipients: Public
ENGINEERING | NORTH AMERICA
REVISION: R01
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]
Wing Riser 991 GT3 –Install Manual
2.4. Remove the four (4) rubber gromets on the inside of the spoiler. You can use a plastic pick to
remove the gromets. Be careful not to damage the paint. Then remove the hardware
holding the spoiler in place using a T40 socket.

6 12/14/2022
Author: Clay Warner
Date: 2022/12/14
Recipients: Public
ENGINEERING | NORTH AMERICA
REVISION: R01
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]
Wing Riser 991 GT3 –Install Manual
2.5. Carefully remove the spoiler. Make sure the brake light cable is clear from being caught
inside the spoiler.

7 12/14/2022
Author: Clay Warner
Date: 2022/12/14
Recipients: Public
ENGINEERING | NORTH AMERICA
REVISION: R01
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]
Wing Riser 991 GT3 –Install Manual
2.6. Install the wing risers. Use a microfiber towel and a 50/50 isopropyl alcohol/water mixture
to clean the surface. Use a 5mm HEX to install the new hardware provided. NOTE: Leave the
hardware slightly loose. Do not tighten the bolts down all the way!

8 12/14/2022
Author: Clay Warner
Date: 2022/12/14
Recipients: Public
ENGINEERING | NORTH AMERICA
REVISION: R01
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]
Wing Riser 991 GT3 –Install Manual
2.7. Place the wing on the risers. Make sure to feed the brake light cable all the way through so
the spoiler can seat properly.

9 12/14/2022
Author: Clay Warner
Date: 2022/12/14
Recipients: Public
ENGINEERING | NORTH AMERICA
REVISION: R01
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]
Wing Riser 991 GT3 –Install Manual
2.8. Using a 5mm HEX, install the hardware on the front of the spoiler first. NOTE: Leave
hardware slightly loose. Do not tighten the bolts down all the way!
2.9. Adjuster the spoiler to your desired height. Make sure to properly align each side of the
spoiler.

10 12/14/2022
Author: Clay Warner
Date: 2022/12/14
Recipients: Public
ENGINEERING | NORTH AMERICA
REVISION: R01
Confidential: Property of Verus Engineering. Not for Distribution outside intended recipient list.
Verus Engineering
[e-mail]
Wing Riser 991 GT3 –Install Manual