VEVOR Peaked Roof User manual

Support and E-Warranty Certificate
https://www.vevor.com/support
CHICKEN COOP
USER MANUAL
We continue to be committed to offering tools at competitive prices. "Save Half", "Half Price",
or any other similar expressions used by us only represent an estimate of savings you might
benefit from buying certain tools with us compared to the major top brands and do not
necessarily mean to cover all categories of tools offered by us. You are kindly reminded to
verify carefully when placing an order with us if you are saving half in comparison with the top
major brands.

- 1 -
MODEL:Peaked Roof(6m)
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
CHICKEN COOP
Peaked Roof(6m)

- 2 -
NOTES
1. The work may have burrs that injure the hands. Please wear gloves before installation.
2. Check whether the parts are complete before installation.
3. Please read this manual carefully before assembly.
-Tools supplied:
-Tools required: + or
-Assembly time: About 1-2 hours (with 2 people)
MODEL AND PARAMETERS
Model
Peaked Roof(6m)
Product Size
L600*W300*H200cm
Door frame
67.5*170cm
Protective net
Steel (Plastic impregnation), Φ0.9mm
Main frame
Galvanized steel pipe, Φ25*0.8mm
ASSEMBLY
Mark
Picture
QTY
1
1450mm
4
2A
1500mm
15
2B
450mm
15
3
1050mm
8

- 3 -
4
1590mm
8
D1
1
D2
1
D3
1
D4
1
D5
2
D6
2
D7
2
D8
4
DP1
Lock
2
DP2
M8
2
DP3
Ø10x80
4
DP4
M6
4
DP5
M8x40
4
DP6
U clips
4
C
15

- 4 -
D
6
E
4
F
4
G
2
H
6
J
Mesh(wide 1m)
2
K
PVC lashing rope
1
L
Plastic cable tie
1bag
M
Tarpaulin
1
N
Rubber cord
14
O
Tent pegs
10
Assemble the parts as shown below:
Step1: Assemble 2A+C+2B into one piece (15 pieces in total)

- 5 -
Step2: Install the bottom frame according to the part number in the picture below.
Step3: Install the column according to the part number below.

- 6 -
Step4: Install the beam according to the part number in the picture below.

- 7 -
Step5: Install the top surface according to the part number in the figure below.

- 8 -
Step6: Install the door according to the part number below.

- 9 -
Step7: Attach the door to the frame.

- 10 -
Step8: Installation of top mesh.The laying mesh can be pre-cut to 6x1m.
(a)The two pieces of mesh are joined
using PVC lashing rope piercings.
(b)Cut off the excess length of mesh if
necessary.
Extra mesh can be buried in the soil.
(c)Secure the mesh to the frame with
cable ties.
Cut off the excess length of cable ties.
L=6m

- 11 -
Step9:Install front and rear mesh (The two mesh are interlaced with PVC lashing rope) and
secure to the frame with excess length cut.
Note: Cut out the mesh at the
door frame and secure it to
the door frame.

- 12 -
Step10: Lay the tarp over the top and secure it with rubber cords.
Secure the chicken coop to the floor with tent pegs.

- 13 -
Manufacturer: HEBEI HABIT METAL PRODUCTS CO.,LTD
ADD: 9# Daocheng Logistics Park, Hengshui High-tech Zone, Hebei
Made in China
Importer: WAITCHX
Address: 250 bis boulevard Saint-Germain 75007 Paris
Importer: FREE MOOD LTD
Address: 2 Holywell Lane, London, England, EC2A 3ET
REP
UK
EUREP UK LTD
UNIT 2264, 100 OCK STREET, ABINGDON
OXFORDSHIRE ENGLAND OX14 5DH
REP
EC
EUREP GmbH
Unterlettenweg 1a, 85051
Ingolstadt, Germany

Support and E-Warranty Certificate
https://www.vevor.com/support