VEVOR NS101-M User manual

Support and E-Warranty Certificate
https://www.vevor.com/support
SCREEN PRINTING MACHINE
NS101-M
USER MANUAL
We continue to be committed to provide you tools with competitive price. "Save Half", "Half
Price" or any other similar expressions used by us only represents an estimate of savings you
might benefit from buying certain tools with us compared to the major top brands and doses
not necessarily mean to cover all categories of tools offered by us. You are kindly reminded to
verify carefully when you are placing an order with us if you are actually saving half in
comparison with the top major brands.

1
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Screen printing
machine

2
This symbol, placed before a safety comment, indicates a kind of
precaution, warning, or danger. Ignoring this warning may lead to
an accident. To reduce the risk of injury, fire, or electrocution,
please always follow the recommendation shown below.
WARNING：Read all safety warnings, instructions, illustrations and
specifications provided with this machine. Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machine in damp or wet locations.
Don’t expose to rain. Keep work area well lighted. Do not use machine in the
presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, or extension cords. This machine can be used by
children aged from 8 years and above and persons with reduced physical, sensory
or mental capabilities or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made by children without supervision.
4. Store idle equipment. When not in use, machine must be stored in a dry location
to inhibit rust. Always lock up machines and keep out of reach of children.
5. Use the right machine for the job. Do not attempt to force a small machine or
attachment to do the work of a larger industrial machine. There are certain
applications for which this machine was designed. Do not modify this machine and
do not use this machine for a purpose for which it was not intended.
7. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically non-conductive clothes and non-skid
footwear are recommended when working. Wear restrictive hair covering to
contain long hair.
8. Maintain machines with care. Keep mahine clean for better and safer
performance. Follow instructions for lubricating and changing accessories. Inspect

3
machine periodically and, if damaged, have them repaired by an authorized
technician. The handles must be kept clean, dry, and free from oil and grease at all
times.
9. Stay alert. Watch what you are doing, use common sense. Do not operate any
machine when you are tired.
10. Check for damaged parts. Before using any machine, any part that appears
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment and binding of moving parts;
any broken parts or mounting fixtures; and any other condition that may affect
proper operation. Any part that is damaged should be properly repaired or
replaced by a qualified technician. Do not use the machine if any switch does not
turn On and Off properly.
11. Replacement parts and accessories. When servicing, use only identical
replacement parts. Use of any other parts will void the warranty. Only use
accessories intended for use with this machine. Approved accessories are
available from VEVOR.
12. Do not operate machine if under the influence of alcohol or drugs. Read
warning labels on prescriptions to determine if your judgment or reflexes are
impaired while taking drugs. If there is any doubt, do not operate the machine.
Warning: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions and situations that may occur. It must
be understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.

4
1.Take out the base(1)and put it on the table, then take out the support
base(2)and put it on the base(1),and lock it with the socket head cap
screw(12)and the gasket M6(13).Locking tool hexagonal wrench M6(VII)
Serial No
Name of accessories
Quantity
12
Socket head cap screw M6X16
6
13
Gasket M6
6
Serial No
Tool name
picture
VII
Hexagon socket
wrench M6

5
2.Take out the arm support(3)and place it on the support(2),and lock it with
the socket head cap screws(12).Locking tool hexagonal wrench M6(VII)
Serial No
Name of accessories
Quantity
12
Socket head cap screw M6X16
4
Serial No
Tool name
Picture
VII
Hexagon socket wrench M6

6
3. Install the outer hexagon nut M10(23)onto the outer hexagon screw
M10X55 (20)and lock it to a depth of about 30 mm, then use a wrench
14- 17(I)to clamp the outer hexagon screw M10X55(20,The adhesive side
is pasted on the external hexagon screw M10X55(20)
Serial No
Name of accessories
Quantity
20
External hexagon screw M10X55
2
23
Outer hexagon nut M10
2
26
felt pad
2
Serial No
Tool name
Picture
I
Wrench 14-17
III
Open spanner M10

7
4.Put two outer hexagon screws M8X100(15)into each with a gasket
M8(16)for standby, take the arm support(4)and place it on the arm platform,
then align the hole, put the outer hexagon screw M8X100 (15)with gasket
M8(16)in,put the gasket M8(16)on the opposite screw(15),and then lock
the outer hexagon nut M8(17),use the open-end wrench M8(4)at the screw
head of the outer hexagon screw M8X100(15),and use the wrench 14-
17(1)on the outer hexagon nut M8(17),Firmly lock both sides at the same
time.
Serial No
Name of accessories
Quantity
15
External hexagonal screw M8X100
2
16
Gasket M8
4
17
Outer hexagon nut M8
2
Serial No
Tool name
Picture
I
Wrench 14-17
IV
Open spanner M8

8
5.Put the hexagonal socket screw M8X16(14)onto the gasket M8(16)for
standby,take the spring hanging plate(6)and place it on the back of the arm
rest(3)with two holes facing each other,lock the hexagonal socket screw
M8X16(14)with the gasket M8(16)into the hole, and lock it with the
hexagonal socket wrench M8(6)
Serial No
Name of accessories
Quantity
14
Socket head cap screw M8X16
2
16
Gasket M8
2
Serial No
Tool name
Picture
VI
Hexagon socket wrench M8
16
3
6

9
6.Put two external hexagon screws M10X20(18)into each with a gasket
M10 (22)for standby,take the table support bar(5)and place it on one end
of the long hole plate on the arm platform(3),lock the external hexagon
screw M10X20(18)with gasket M10(22)to the tooth hole plate of the table
support bar(5),and lock it with a wrench 14- 17(1)at the head of the
hexagon screw M10X20(18)
Serial No
Name of accessories
Quantity
18
External hexagon screw
M10X20
4
22
0
Gasket M10
4
Serial No
Tool name
Picture
I
Wrench 14-17