VEVOR S3020 User manual

Technical Support and E-Warranty Certificate
www.vevor.com/support
CNC ENGRAVING MACHINE
MODEL:S3020/S4040
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and does not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:S3020/S4040
S3020
S4040
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
CNC ENGRAVING
MACHINE

- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
INSTALLATION STEPS
MODEL:S3020
A. Mounting Control Box
Required
Parts
NO.
Name
QTY
1
Gantry frame
1
2
Control Box
1
3
M5*6 Screws
4
Step：
As shown in Figure 1, place the control box on the gantry frame and fix it
with M5*6mm screws.
Figure 1

- 3 -
B. Mounting base
Required
Parts
NO.
Name
QTY
4
Base
1
5
Gantry frame
1
6
M5*20 Screws
8
Step：
As shown in Figure 2, place the gantry on the base and secure it with
M5*20mm screws.
Figure 2

- 4 -
C. Interface diagram

- 5 -
MODEL:S4040
A. Mounting base
Required
Parts
Name
QTY
Right side of
the Y axis
1
Left side of Y
axis
1
Base structure
2
M5*16 Screws
8
Step：
1. The base structure and left and right Y axis are placed as shown in
Figure 1.
2. Fix it with M5*16 screws (as shown by arrow).
Figure 1

- 6 -
D. Install the panel
Required Parts
Name
QTY
Base
1
Panel
2
M5*20mm
Screws
8
Step：
1. Place the panel neatly on the base and align the screw holes.
2. Secure the panel to the base using M5*20mm screws.
Figure 2

- 7 -
E. Install the gantry
Required
Parts
Name
QTY
Gantry frame
1
M5*16 Screws
4
Step：
1. Place the gantry frame on the left and right Y axis as shown in Figure 3.
2. Secure the gantry frame to the Y axis with M5*16 screws.
Figure 3

- 8 -
F. Mounting spindle
Required Parts
Name
QTY
Motor fixture
1
Spindle motor
1
M5*55 Screws
4
Step：
1. Place the main shaft on the gantry frame as shown in Figure 4.
2. Fix the main shaft to the gantry frame with M5*55 screws.
Figure 4

- 9 -
G. Install the Y-axis fastener
Required Parts
Name
QTY
Tow chain
fastener [1]
1
Tow chain
fastener [2]
1
M4*6 Screws
4
Step：
Place the two tow chain fasteners as shown in Figure 5 and fix them with
M4*6 screws.
Figure 5

- 10 -
H. Install the X-axis fastener
Required Parts
Name
QTY
X-axis tow
chain fastener
1
M4*6 Screws
2
Step：
Place the X-axis towing chain fastener as shown in Figure 6 and fix it with
M4*6 screws.
Figure 6

- 11 -
I. Install X - axis drag chain plate
Required Parts
Name
QTY
X-axis drag
chain plate
1
M4*6 Screws
2
Step：
Place the X-axis drag chain plate as shown in Figure 7 and fix it with M4*6
screws.
Figure 7

- 12 -
J. Mounting tow chain
Required Parts
Name
QTY
X-axis drag
chain plate
2
M4*6 Screws
2
Step：
Place the tow chain as shown in Figure 8 and secure it with M4*6 screws.
Figure 8

- 13 -
K. Interface diagram
LIST OF PARTS
Name
Quantity
S3020
S4040
USB cable
1
1
Knife block
1
1
Block bolt
4
4
Press block
4
4
Harness fixing frame
/
3
Brush
1
1
Test carving plate
1
1
Assembly screw
1（Bag）
1（Box）

- 14 -
Wrench
2(Wrench No. 13/15;
14/17)
2(Wrench No. 13/15;
14/17)
Hexagon socket
4(No.2; 2.5,3,4)
4(No.2; 2.5,3,4)
Flat mouth knife
10
10
Harness
1
1
Control chassis
/
1
Touch offline controller
1
1
Usb flash drive
1
1
Power adapter
1
/
CONTROL BOARD WIRING

- 15 -
ENGRAVING MACHINE SOFTWARE INSTALLATION INSTRUCTIONS
1. Install the driver (Download from U disk)
2. Open the control software

- 16 -
3. To Determine your Machine's COM port:
• For Windows XP: Right click "My Computer"→ Select "Manage"→ Select
"Device
Manager". For Windows 7: Right
click "Computer"→ Select "Manage" → Select "Device Manager" from left
pane.
• For Windows 10: Right click “This PC"→ Select "Manage" → Select
"Device Manager"
from left pane.
• In the tree, expand "Ports (COM & LPT)“ , your machine will be the USB
Serial Port
(COMX), where the “X” represents the COM number, for example COM6.
• If there are multiple USB serial ports, right click each one and check the
manufacturer,
the machine will be "CH340“. Select port and baud rate

- 17 -
4. Select port and baud rate
5. Show idle, connection successful

- 18 -
SOFTWARE OPERATION
1. Open, select G code and import,Clamp the tool.
2. Move to the starting point of the code and clear the X, Y, Z
origin

- 19 -
3. Click send to run the code
4. Move to the starting point of the code and clear the X, Y, Z
origin