VEVOR SS-450 User manual
Technical Support and E-Warranty Certificate www.vevor.com/support
DROP SLOT SAFE
MODEL:SS-450
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.
1
MODEL:SS-450
Have product questions? Need technical support? Please feel free to
contact us:
CustomerService@vevor.com
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
DROP SLOT SAFE
2
INSTRUCTIONS
Thank you very much for choosing this product. Please read all of the
instructions before using it.The information will help you achieve the best
possible results.
3
TECHNICAL PARAMETERS
PARTS LIST
Model
SS-450
Working Voltage Range
4.2~7.0V dc
Working Under voltage Point
4.6 V ±0.2 V
Working Current
≤ 380 mA
Product Size
450*350*300 mm
Net Weight
16 kg
Gross Weight
18 kg
Working Power
4 x AA(1.5V) batteries
FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:(1)This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
English Manual*1
Emergency Key*2
4
OPENING YOUR SAFE FOR THE FIRST TIME
Open the door for the first time, use the configured emergency key to open
the door. The operation steps are as follows:
DESCRIPTION:
1.The electronic lock comes with a default password of "123456" upon
factory shipment.
2. Lock indicator light :The lock of the cabinet was shut and could not be
opened
3. Unlock indicator light: unlock and light up.
4. Setting indicator light: Enter setting mode.
Tips: Press and hold the green button on the mechanism for 5
seconds to restore the system to its initial settings and clear all
passwords.
Expansion Bolt*4 (M6*80)
External Power Box*1
1. Press down to open the
emergency lock cover.
4. Install batteries into
battery box.
2. Insert the emergency key into
the keyhole and push it to rotate
65° counterclockwise.
5.Make sure the battery
matches ‘+’ and ‘-’ in
the box.(not including
4 alkaline 1.5V
batteries)
3.Turn the knob counterclockwise
to open the door.
6.Weak power, emergency method:
Emergency key
5
Notice: Please do not put emergency keys and external
power supply inside the safe!
PERSONAL PASSWORD SETTING
1. Press the green button inside the box (code switch), and the buzzer will
emit a beep sound while the touch light illuminates.
2. Enter the desired password, which should be between 3 and 12 digits
long.
3. Press the "#" key to confirm the password. The buzzer will emit a long
beep, and the light will turn off, indicating the successful password setup or
change.
MANAGE PASSWORD SETTINGS
1. Wake up the touch screen by touching it and enter "00".
2. Press the green button inside the box (code switch), enter the new
password, and confirm it with the "#" key.
Notice: Do not set personal password same with management code.
THREE WAYS TO OPEN THE SAFE
1. Emergency Key + Knob: For the first time, forget the password, and the
battery is out of power. Insert the emergency key vertically, turn it to the left,
and at the same time turn the knob to the right to open.
2. Password + Knob: Daily unlock. Enter the personal or management
password, press "#" or "*", then turn the knob to the right to open.
3. Password + Knob + External Power Box: The internal battery is dead,
and the key is damaged or lost. Insert the external power box, enter the
personal or management password, press "#" or "*", and then turn the
6
knob to the right to open.
LOW BATTERY ALERT
1. The system uses four 1.5V alkaline batteries. If the voltage is low, it will
continuously remind by emitting "drip, drip, beep" sounds after opening the
safe. After the "drip, drip, beep" sounds twice, the power indicator light will
flash for about 30 seconds and then turn off, reminding the user to replace
the batteries promptly.
2. In case of low battery voltage, you can use emergency power or the
mechanical emergency key for operation.
3. This electronic lock has a power-off protection function, and the
password will never be lost.
VIGILANCE SETTING AND DEACTIVATION
1. To set the alarm, wake up the touch screen, and press the "*" key. The
computer board will automatically enter the alarm state. The safe will
trigger an alarm immediately after vibration.
2. To cancel the alarm, enter the set password when the safe is in the
alarmed state, and press the "#" key to open the safe and eliminate the
alarm.
Tips: This electronic lock has an automatic alarm feature that triggers
for 30 seconds or 1 minute after 3 (or 5) consecutive incorrect
password entries. Entering the correct password will eliminate the
alarm sound.
HOW TO WALL OR FLOOR MOUNTING
*The safe may be mounted to a wall or floor.
* Drill the appropriate size holes for the anchors you are using
* Mount the safe by running screws from inside of the safe
and securing to anchors; ensure the safe is mounted securely Floor
7
Mounting
* Use proper drill tools depending on the type of floor you are mounting the
safe (wood, tile, or concrete).
SAFETY AND COMPLIANCE
1. Reduce the risk of theft, the safe must be posted on the wall or floor to
ensure safety.
2. Please take good care of the emergency key and store it in a secret
place away from the safe. Do not put the emergency key into the safe, or
the emergency key will not be used to open the safe when the battery runs
out.
3. Do not place the product on an unsafe overhead, so as to avoid falling,
damaging the product or injuring people.
4. Do not spill liquid on the control panel, or it may cause an electric shock
to the internal electronic components and prevent them from working
properly.
WARMLY REMINDER
1. Because it is handmade, inside solder joints or rust stains are normal.
2. Please keep emergency keys, secret cabinet keys and external power
supply box safe.
3. The emergency key cannot open the safe of other brands or the same
brand, which is unique.
(Please do not try, to avoid damage to the safe and the unmatched key
cannot be taken out)
4. The protective film on the knob cover can be torn off.
5. Before closing the door, do not remove the emergency key or adjust its
direction, which can prevent the lock bolt from jamming, and knob
operation will be more smooth.
6. The door won’t shut: Make sure there are no obstructions. If the door
bolts are extended, re-enter the user code and turn the knob clockwise to
retract them.
8
AFTER-SALES SERVICE
1. If the product you received has other problems such as usage problems,
please feel free to contact us and reply to online customer service within 24
hours to serve you.
2. Our products support 90 days for no reason to return or exchange.
3. I wish you a happy online shopping.
CORRET DISPOSAL
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through indicates
that the product requires separate refuse collection in the European Union.
This applies to the product and all accessories marked with this symbol.
Products marked as such may not be discarded with normal domestic
waste, but must be taken to a collection point for recycling electrical and
electronic devices.
9
10
Table of contents
Other VEVOR Safe manuals
