VEVOR SS1447-ZW User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
SAFE BOX USER MANUAL
MODEL:SS1447-ZW
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

- 1 -
MODEL:SS1447-ZW
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
SAFE BOX

- 2 -
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:(1)This device may not cause
harmful interference, and (2)this device must accept any interference
received, including interference that may cause undesired operation.
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed through
indicates that the product requires separate refuse collection in the
European Union. This applies to the product and all accessories
marked with this symbol. Products marked as such may not be
discarded with normal domestic waste, but must be taken to a
collection point for recycling electrical and electronic devices
INSTRUCTIONS
Thank you very much for choosing this safe box. Please read all of the
instructions before using it.The information will help you achieve the best
possible results.

- 3 -
TECHNICAL PARAMETERS
PARTS LIST
SS1447-DZ
SS1447-ZW
Working Voltage Range
4.2-6.8Vdc
Working Undervoltage Point
4.5V plus or minus 0.20V
Quiescent Current
Less than 5A
Product Size
360*355*1447 mm
Net Weight
32.6 kg
Gross Weight
36.6 kg
Working Power
4 x AA(1.5V) batteries
Built-in Storage Key*2
Emergency Key*2
Expansion Bolt*5 (φ10*50)
External Power Box*1

- 4 -
WARNING
1. Danger of Tipping Over
• A child or adult can tip the safe and be killed or seriously injured.
• Serious injury may occur to children and adults if the safe is not
secured before installation.
• Children should not play with or around the safe at any time.
2. Please Do Not Put the Emergency Key, the External Power Box In
The Safe BOX
GETTING STARTED
1. Move down the silver part of the keyboard lock reveals the emergency
keyhole.
2. At this time, the emergency key channel is exposed.
3. Insert the emergency key into the keyhole and turn it 35°
counterclockwise.
4. Turn Handle clockwise to open the safe.
Tip: Use the emergency key when opening the door for the first time. After
installing the battery, set the fingerprint password and key password.
INSTALL BATTERIES
1. Open the battery box cover.
2. Insert 4 AA batteries and pull the battery cover back. (Caution: Do
not use Lithium Battery or different brand of recharging batteries.)
3. Continue to the next step.
The Original password is 123456#. No fingerprint recognition is set for
the factory blank fingerprint.

- 5 -
PASSWORD SETTING METHOD （ TWO GROUPS OF PASSWORD ）
1. Setting management code: After unlocking,touch to rouse the screen.
Press number 00,then press the green setting button in the box, enter
the new password and end with #.The password has 3-12 digits.
2. Setting personal code: After unlocking, touch to rouse the screen.
Press number 11, then press the green setting button in the box ,enter
the new password and end with #. The password has 3-12 digits.
Tip: In standby mode,press the green button in the box (fingerprint delete
key)for about 5 seconds. When you hear a long “Di” sound, it indicates that
all fingerprints and passwords are deleted successfully, and factory
settings are restored. Any fingerprint can lock it.
SET FINGERPRINT
Tip: If the fingerprint is not set successfully, any fingerprint can identify the
door. (30 fingerprints are stored)
1. When the door is open, press the setting button.
2. After heard two short sounds of "beep" , the scanner light is on. At this
time, collect fingerprints on the scanner for four times.
3. When two short "beep" follow by a long "beep", indicating fingerprint
registration is set successfully.
4. Setting failure: Such as three short sounds "beep", it means failure
registration.
Setting failure cause:
1. Weak current situation, solution: Change the battery.
2. Finger peeling, solution: Replace the finger.

- 6 -
OPEN THE SAFE
1. Enter the correct user password, the electromagnet pulls, the screen
displays lock status, turn the handle clockwise to open the door
successfully.
2. Press the correct fingerprint, the electromagnet pulls, the screen
displays lock status, turn the handle clockwise to open the door
successfully. (blank fingerprint is not allowed to open the door)
3. If the identification is successful, the screen display will in the unlock
status
ALARM FUNCTION
1. In the standby state, press "*", and you will hear “beep” sound, the
digital pad is off that indicates that is in the alert status. The safe will
alarm if it vibrates, you can enter password or scan fingerprint to open
the door, and the alarm relieved automatically. The warning sound will
lasting 30s.
2. If you scan wrong fingerprint five times, and input wrong password
three times. The warning sound will last 30s.
Tips: After the alarm, enter the correct fingerprint or password. Then the
electromagnet closes for 5 seconds, the alert state will be lifted
automatically.
NOISE ELIMINATION FUNCTION
Touch the touch pad to wake it up. press "11#" to turn on or off all sounds.
UNDERVOLTAGE INDICATION
1. The gun safe needs four 1.5V alkaline batteries
2. If the voltage is insufficient in the door,the buzzer will remind
"beep"sound, remind the user to replace the battery in time.
Note: It is recommended to use ordinary batteries, avoid to use lithium

- 7 -
batteries or different brand of recharging batteries.
MOUNTING INSTRUCTIONS
The safe could be mounted to a wall or floor.
·Drill the appropriate size holes for the anchors you are using.
· Mount the safe by running screws from inside of the safe and securing to
anchors. Ensure the safe is mounted securely on the floor.
·Use proper drill tools depending on the type of floor you are mounting
(wood, tile, or concrete).
MOUNTING INSTRUCTIONS
~ In kind prevails
Made in China

Technical Support and E-Warranty Certificate
www.vevor.com/support