VEVOR YL-15T User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
GEAR PULLER
MODEL:YL-15T
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an estimate of savings
you might benefit from buying certain tools with us compared to the major top brands and doses not
necessarily mean to cover all categories of tools offered by us. You are kindly reminded to verify carefully
when you are placing an order with us if you are actually saving half in comparison with the top major brands.

1
MODEL:YL-15T
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
GEAR PULLER

2
Safety & Warning
Read and understand this entire manual before assembling, installing,
operating, or servicing this product. Failure to follow these warnings
and instructions can cause death, personal injury, or damage valuable
property.
While assembling and using this product, keep the work area clean
and well-lighted, and keep spectators and children out of the work
area.
Wear ANSI-approved safety goggles, heavy-duty work gloves, and
safety shoes during use.
Use as intended only.
Before each use, inspect the general condition of the product. Check
for: broken, cracked, or bent parts, loose or missing parts, and any
condition that may affect the proper operation of the product.
After every use, wipe with a clean cloth. Then, store the product in a
safe, dry location out of reach of children and other non-authorized
people.
Ensure only genuine parts are used for replacement & Repair.
Be aware of dynamic loading! The sudden load movement may briefly
create an excess load, causing product failure.
Specifications
Model Series
YL-15T
Max. Tensile Force (t)
15
Max. Jaw Spread(inch)
12
Structural Style
Hydraulic

3
Figure of the Product
Part
Description
Qty
1
Pump Body
1
2
Pull Tab
6
3
Ejector Pin
1
4
Bolt
6
5
Nut
6
6
Handle
1
7
Puller Ring
1
8
Claw Feet
3

4
Installation instructions
Step 1.
Step 2.

5
Step 3.
Step 4.

6
Instructions
A. Oil valve stem screw tightens on deasil first when using.
B. Adjust hook claw to claw hook to hold the objects.
C. Raise the handle hand hole to lift the filling pump upper and lower,
corresponding to going backward; the claw hook has back and forth inside
to insert, and the object is pulled out to draw the quilt.
D. If you want to make the cylinder rod contract back, it only needs to go
back to loosen the right valve stem in a counterclockwise direction; little to
little, the cylinder rod has gone back to contract gradually under the
function of the spring.
E. According to the external diameter of the object, draw distance, and load
strength, choose the corresponding hydraulic pressure of tonnage draw
horses before using, must guard against overloading to use, avoid
damage.
F. In order to prevent causing machines damage for overload, hydraulics
setting set up overload to unload the valve automatically; when the object
at exceeding the specified load, the hydraulic pump will over low oil
automatically, workpiece will don t retreat and enter, should reelect with
large hydraulic pressure of tonnage draw horses at this moment.

Technical Support and E-Warranty Certificate
www.vevor.com/support
Made In China