VIAIR 300P SXS PORTABLE POWERSPORT Series User manual

IMPORTANT:
It is essential that you and any other operator of this
product read and understand the contents of this manual
before installing and using this product.
SAVE THIS MANUAL FOR FUTURE REFERENCE
USER MANUAL
300P SXS PORTABLE POWERSPORT
SERIES COMPRESSOR
PART NO. 30032

300P SXS PORTABLE POWERSPORTS SERIES COMPRESSOR
USER MANUAL
(Fig. 1) 300P SXS Air Compressor Kit Installation Parts List:
A. Permanent 2-Pin SAE connector connector
B. 2-Pin SAE connector with alligator clips
C. 5-in-1 Inator/deator Coil Hose (Braided) 60PSI Gauge.
D. Velcro Strap (1)
E. Self tapping screws (2)
F. 3pcs ination tips
G. Presta Valve adapter
H. Air lter Assembly (1)
I. Filter elements (2pcs)
IMPORTANT SAFETY INSTRUCTIONS:
CAUTION: To reduce risk of electrical shock or electrocution:
- Do not disassemble. Do not attempt repairs or modications.
- Refer to qualied service agencies for all service and repairs.
- Do not use this product in or area where it can fall or be pulled into water or other liquids.
- Do not reach for this product if it has fallen into liquid.
- Use this compressor with 12-Volt DC systems only.
- This product should never be left unattended during use.
WARNING: To prevent injury:
- Never allow children to operate this compressor.
Close supervision is necessary when this compressor is being used near children.
- This compressor will become very HOT during and immediately after use.
Do not touch any part of this compressor with bare hands, other than the ON/OFF switch
during and immediately after use.
- Do not use this product near ames or explosive materials or where aerosol products
are being used.
- Do not operate this product where oxygen is being administered.
- Do not pump anything other than atmospheric air.
- Never use this product while sleepy or drowsy.
- Do not use any tools or attachments without rst determining maximum air pressure for that
tool or attachment.
- Never point any air nozzle or air sprayer toward another person or any part of the body.
- This air compressor is equipped with an Automatic Reset Thermal Protector, and can
automatically restart after the thermal protector resets. Always cut o power source when
thermal protector becomes activated.
- Wear safety glasses or goggles when operating this product.
- Use only in well ventilated areas.
H
I
E
G
F
D
AB
C

300P SXS PORTABLE POWERSPORTS SERIES COMPRESSOR
USER MANUAL
INSTALLATION
Please read and follow the installation instructions carefully to avoid injury or damage to the
compressor and your vehicle.
Each of our air compressors and parts have been carefully produced and packaged. Before you
begin installation, please familiarize yourself with Installation Parts List (Fig. 1) of this manual.
Guidelines for Selecting Mounting Location:
The selection of proper mounting location for your air compressor will help ensure a long and trouble
free compressor service life. Please pay close attention to the following guidelines:
1. Select a FLAT, UPRIGHT, AND SECURE location where the compressor can be mounted.
2. To maximize air compressor performance, locate compressor as CLOSE TO THE BATTERY as
possible so that length of positive lead wire required is at a minimum.
3. Choose mounting location that is as cool as possible and AWAY FROM HEAT SOURCES. The
cooler the ambient temperature, the less chance the compressor will overheat.
4. This compressor is moisture & dust resistant, but NOT DIRT OR WATERPROOF. Do not mount
compressor in locations where the unit is likely to come in contact with the elements.
5. Do not mount compressor near areas where ammable liquids are stored.
WARNING:Important, replace protective cover when not in use.
MOUNTING AND WIRING
1. Disconnect ground cable from vehicle’s battery. Connect the provided permanent 2-Pin SAE
connector to your battery.
2. Temporarily position the air compressor’s bag in the location where it will be mounted.
3. Use the provided self tapping screws to mount the compressor’s strap and the bag to the
selected location.
4. Place the air compressor inside the bag and secure it with compressor’s strap.

300P SXS PORTABLE POWERSPORTS SERIES COMPRESSOR
USER MANUAL
OPERATING INSTRUCTIONS:
Please read and follow the operating instructions carefully to assure that you will enjoy the
convenience and best use out of your air compressor.
1. Always operate the compressor AT OR BELOW THE MAXIMUM PRESSURE RATING of the
compressor. Refer to Specications section of this manual.
2. Always OBSERVE THE MAXIMUM DUTY CYCLE of the air compressor. Refer to Specications
section of this manual for details. Operations exceeding maximum pressure ratings and or duty
cycle will result in damage to air compressor.
3. Your air compressor is equipped with an AUTOMATIC THERMAL OVERLOAD PROTECTOR.
This feature is designed to protect the air compressor from overheating causing permanent
damage to your air compressor. The thermal overload protector will automatically cut o power
to air compressor should internal operating temperature of the air compressor rise above safe
levels during excessive use.
4. Should at any time during use, your air compressor automatically shuts o, do not attempt to
restart air compressor. Turn ON/OFF switch of air compressor to the OFF position. The automatic
thermal overload protector will automatically reset when internal temperature of the air
compressor drops below safe level. After allowing air compressor to cool o for about 30 minutes,
you can safely resume use of the air compressor by turning on the air compressor.
5. Please note that you may experience a slight delay (about ½ second) of the compressor’s motor
starting when the ON/OFF Switch is turned on while compressor is pressurized (when there is
pressure in the line that the compressor is connected to). This is a normal delayed reaction, not a
Compressor ON/OFF switch malfunction.
6. It is strongly recommended that you keep the vehicle’s engine running while using the air
compressor to prevent discharge of your vehicle’s battery.
7. ONLY OPERATE THE AIR COMPRESSOR IN WELL VENTILATED AREAS.
Compressor performance is enhanced when operating compressor with vehicle engine running.
IMPORTANT NOTE:
TO AVOID DIRT AND MOISTURE CONTAMINATION AS WELL AS SHORTING THE POWER WIRE,
PLEASE REPLACE SAE TERMINAL COVER WHEN NOT IN USE.
IMPORTANT: Engine must be running while using this compressor.
Before attaching air compressor’s power cord to power source, check to make sure that the
ON/OFF switch of your compressor is in the OFF position. Attach the 2-Pin SAE connector to your
compressors’s 2-Pin SAE connector or to the provide 2-Pin SAE connector to your alligator clamp
connector.
CAUTION: Your Portable Air Compressor is Moisture and Dust Resistant, but NOT WATER OR DUST
PROOF. Never place compressor in soft sand while running the compressor. Vibration from the
compressor will cause the compressor to settle into soft sand, resulting in compressor drawing in
foreign particles. Never expose compressor to water while running the compressor.
This air compressor comes with ¼” quick connect stud. Your Inline Deator comes with
extension coil hose with ¼” quick coupler. Simply attach this multifunction extension coil hose
to the ¼” quick connect stud and you are ready to inate tires. The Inline Inator/Deator
Hose can be used for both Airing Up and Airing Down. Please familiarize yourself with the
following dierent functions of this versatile air tool:

300P SXS PORTABLE POWERSPORTS SERIES COMPRESSOR
USER MANUAL
TIRE INFLATION:
1. Attach quick connect coupler to air compressor.
2. Push the tire chuck, with the lever in the upright position, down over the tire valve stem
and then push the lever down to the horizontal position to lock in place.
3. Check to make sure the Deator Collar Lock is disengaged.
4. Turn compressor switch on to begin ination.
When desired pressure is reached, turn compressor o.
CAUTION: To avoid over ination, never exceed recommended pressure on articles to be inated.
Bursting can cause serious injury.
HANDS-FREE CONTINUOUS DEFLATION:
1. Push the tire chuck, with the lever in the upright position, down over the tire valve stem and then
push the lever down to the horizontal position to lock in place.
2. Push Deator Collar toward tire valve stem and turn Deator Collar clockwise to engage lock.
3. When desired pressure is reached, turn Deator Collar counterclockwise to disengage lock.
IMPORTANT: Make sure compressor sits upright while operating compressor. Do not operate
compressor in any other position. Avoid tugging at compressor to move it. Instead, move
compressor to the same side of vehicle as tires that are being aired up.
Always make sure the Portable Compressor’s 8ft. power cord is uncoiled and fully extended
when using your air compressor to avoid overheating the power cord.
INTERMITTENT DEFLATION:
1. The intermittent deation function oers fast downward pressure adjustments.
2. With tire chuck attached to tire valve stem, push Deator Collar toward tire valve stem
to decrease tire pressure.
3. Release Deator Collar to halt deation.
INLINE PRESSURE GAUGE:
1. The 2-inch Inline Pressure Gauge provides convenient tire pressure monitoring when airing up or
down. This eliminates switching back and forth between a tire chuck and a tire pressure gauge.
2. Please note that during ination and deation, due to air velocity, pressure gauge cannot
provide accurate pressure readings. Momentarily halt ination or deation to obtain accurate
pressure readings.

300P SXS PORTABLE POWERSPORTS SERIES COMPRESSOR
USER MANUAL
SAFETY PRECAUTIONS:
1. Always inate tires to manufacturer’s recommended tire pressures. Exercise extreme caution
when driving with aired-down tires. Reinate tires before high-speed roadway travel.
2. Never exceed 20 M.P.H. when driving with partially inated tires.
3. Never make sharp turns while driving with reduced tire pressure.
4. Re-inate tires before high speed traveling onto roadways.
5. Use heat-resistant, minimum 200 PSI-rated working pressure extension hose. Do not use
aftermarket hoses with less than 200 PSI working pressure.
Some aftermarket hoses may not be suitable for use with this air compressor due to heat and
pressure typically generated by this type of air compressors.
6. The use of a close-ended tire chuck will cause excessive pressure buildup if tire chuck is not
attached to tire valve stem while air compressor is in operation.
IMPORTANT: Always use an Open-Ended tire chuck such as the tire chuck equipped on the
Deator/Inator Coil Hose for tire ination when using a compressor without an air tank.
CAUTION: The extension hose and ttings connected extension hose will become very HOT during
and after use. If necessary, wear heat resistant gloves to remove hose from the compressor quick
connect stud.
MAINTENANCE & REPAIRS:
Your air compressor is equipped with permanently lubricated, maintenance-free motor. Never try
to lubricate the compressor. Regularly clean dust and dirt from compressor cooling ns and motor
housing. All repairs should be performed by Manufacturer or Manufacturer authorized service
agencies only.
MODEL 300P SXS SPECIFICATIONS:
Part Number: 30032 / 300P SXS
Motor Voltage: 12-Volt
Motor Type: Permanent Magnetic
Max. Working Pressure: 150 PSI*
Max. Duty Cycle (@ 72ºF): 33% @ 100 PSI
Continuous Use (@ 72ºF & 30 PSI): 30 Minutes
Max. Current Consumption: 30-Amps
Fuse: 40-Amps
Inline Pressure Gauge: 60 PSI*
Auto. Reset Thermal Protection: Yes
* Do not exceed compressor’s max working pressure to prevent damage to the compressor.

THIS PAGE INTENTIONALLY LEFT BLANK

15 EDELMAN • IRVINE, CA 92618
TEL: [phone] • FAX: [phone]
www.VIAIRcorp.com
LIMITED WARRANTY:
VIAIR®Corporation warrants this product, when properly installed and under normal conditions of use, to be free from defects in
workmanship and materials for a period of one year from its original date of purchase. To receive warranty service or repair, please
contact VIAIR®Corporation.
Returns should be made within one year of the date of purchase, after a Return Goods Authorization (RGA) number has been assigned
by VIAIR® Corporation. To obtain RGA, fax a copy of your receipt to [phone]. For complete warranty details, please visit:
www.VIAIRcorp.com/warranty
PLEASE NOTE:
THIS WARRANTY COVERS PRODUCT DEFECTS ONLY; IT DOES NOT COVER INCIDENTAL OR CONSEQUENTIAL DAMAGES
AS RESULT OF MISUSE OR ABUSE.
This Manual is proprietary to VIAIR® Corporation and no ownership rights are hereby transferred. No part of the Manual shall be used,
reproduced, translated, converted, adapted, stored in a retrieval system, communicated or transmitted by any means, for any commercial
purpose, including without limitation, sale, resale, license, rental or lease, without the prior express written consent of VIAIR®.
VIAIR® does not make any representations, warranties or guarantees, express or implied, as to the accuracy or completeness of the
Manual. Users must be aware that updates and amendments will be made from time to time to the Manual. It is the user's responsibility
to determine whether there have been any such updates or amendments. Neither VIAIR® nor any of its directors, ocers, employees
or agents shall be liable in contract, tort or in any other manner whatsoever to any person for any loss, damage, injury, liability, cost or
expense of any nature, including without limitation incidental, special, direct or consequential damages arising out of or in connection
with the use of the Manual.
R4-062922© VIAIR®Corporation