Viavito SINA User manual

Owner’s Manual.
Elliptical Cross
Trainer.
SINA
www.viavito.com
Manual version 1.2

02 www.viavito.com
Congratulations
on purchasing your
very own SINA
Elliptical Cross Trainer.
Manual Contents.
You have chosen a high-quality, safe and
innovative piece of exercise equipment as
your training partner and we are certain
it will keep you motivated on the way to

Please take the time to read this owner’s
manual as it will help you to get the most
out of your new piece of equipment.
For more information, or if you require
any assistance please email us at
[e-mail]
Safety Information 03/05
Overview of Your Sina 06
Machine Assembly 07/18
Contents Checklist 07
Hardware Pack 08
Assembly Diagram 09
Assembly Instructions 10/18
Before You Use Your Sina 19/20
Mounting and Dismounting 19
Body Positioning 20
Console Instructions 21/28
Button Functions 21
Display Functions 22
Personalising the Units 22
Operation 23/28
Conditioning Guidelines 29/32
Beginner's Guide to Exercise 30
Stretching Guide 31/32
Customer Support 33/34
Contact Information 33
Manufacturer’s Warranty 34
Technical Information 35/40
Troubleshooting 35
Space Required 35
Exploded Diagram 36
Parts List 37/40

03www.viavito.com
Safety Information.
• Please read all the instructions carefully
before using this product.
• Retain this manual for future reference.

slightly from the illustrations and are subject
to change without notice.
Note the following precautions before
assembling or operating the machine:
01 Assemble the machine exactly as per the
instructions in this manual, DO NOT use
power tools to assemble it.
02 Check all the screws, nuts and other
connections before using the machine for

has been built correctly and is safe
to be used.
03 This machine is for indoor, home use only.
Position the machine on a clear, dry and
level surface. DO NOT position it near
water or outdoors, or in a room or build-
ing that is not properly insulated such as a
garden shed or a garage.
04 Place a suitable base (e.g. rubber mat,
wooden board etc.) beneath the
machine in the assembly area to
protect it from dirt.
05
space around the cross trainer
when you set it up.
06 Before beginning training, remove
all objects within a 2-metre radius
of the machine.
07 Use the machine only for its intended
purpose as described in the manual.
This machine is not suitable for
therapeutic or medical purposes.
08 This machine may only be used by
one person at a time.
09 Always wear appropriate workout clothing
when exercising. Aerobic shoes
are required when using this machine.
10 Before exercising on this machine, always
warm up and do the stretching exercises

11 When altering any adjustable parts, make
sure they are adjusted properly and note
the marked maximum
position for each part.
12 DO NOT use aggressive cleaning
products, such as detergents,
to clean the machine. Remove
drops of sweat from the machine

13
incorrect or excessive training.
Consult a doctor before beginning
a training program.
14 WARNING! Heart rate monitoring systems
may be inaccurate. Over exercising may
result in serious injury or death. If you feel
faint or experience dizziness, nausea, chest
pain, or any other abnormal symptoms STOP
EXERCISING IMMEDIATELY AND CONSULT A
PHYSICIAN WITHOUT DELAY.
15 Disabled persons should not use

or physician in attendance.

04
16 Children should be kept away from
the machine at all times.
17 WARNING! Individual human power
which is required to carry out

the mechanical power displayed.
18 The machine is equipped with a com-
puter console which can adjust the
resistance. Reduce the resistance by
turning the control wheel anti-clock-
wise. Increase the resistanc by turning
the control wheel clockwise.
19 WARNING! The machine does not
freewheel. The pedals will continue

your pedaling speed in a controlled
manner to avoid injury.
20 The maximum user weight is 120kg
(265lbs). The product weighs 47kg
(104lbs). Safety standards: EN/ISO
20957 Class HA.
21 WARNING: The safety level of the
machine can be maintained only if it
is examined regularly for damage and
wear. Examine the machine carefully
before you use it, especially the
components most susceptible to wear,
e.g., handlebar, cranks, pedals, bearings,
and the connection points.
22 Stop using the machine immediately
if there are any defective components
and keep it out of use until you replace
the components or it is repaired

23 Use only original spare parts for any
necessary repairs. Using 3rd party parts
will invalidate any warranty.
24 WARNING: If any of the adjustment
devices are left projecting, they could
interfere with the user’s movement.
25 WARNING! Inappropriate use of this
machine such as while under the

with instructions or excessive usage,
may result in serious injury or death.
WARNING: Before beginning using this
machine or doing any exercise program,
consult your doctor. This is especially
important for people over the age of
35 or those with pre-existing health
problems. Read all instructions before
using this elliptical cross trainer.
Viavito assumes no responsibility
for personal injury and/or property
damage sustained by or through
the use of this product.
www.viavito.com

05
www.viavito.com
RECYCLING INFORMATION
Used electrical and electronic equipment (WEEE) should not be mixed
with general household waste. For proper treatment, recovery and
recycling, please take this product to designated collection points where
it will be accepted free of charge. Alternatively, in some countries you
may be able to return your products to your local retailer upon purchase
of an equivalent new product. Disposing of this product correctly will

on human health and the environment, which could otherwise arise
from inappropriate waste handling. Please contact your local authority
for further details of your nearest designated collection point. Penalties
may be applicable for incorrect disposal of this waste, in accordance with
your national legislation.
SAFETY STANDARDS
This equipment meets the requirements of European safety directives
such as: the Electromagnetic Compatibility (EMC) Directive and the Low
Voltage Directive (LVD).

06
Overview of Your Sina.
Thank you for selecting the Viavito Sina elliptical cross trainer. This manual
will guide you through the assembly process. Please familiarise yourself with
the parts labeled in the drawing below and check that they are all present
and correct before you begin to assemble your machine.
www.viavito.com
Length: 132cm (52”)
Width: 55cm (22”)
Height: 170cm (66”)
Weight: 47kg (104lbs)
Moving Handlebar
Console
Pedal
Wheel
Fixed Handlebar
Rotating Dial
Hand Pulse
Sensors

SINA SINA
SINA
07
Machine Assembly.
Contents Checklist Make sure you have the following parts:
www.viavito.com

08 www.viavito.com
Hardware Pack
Do watch our step-by-step assembly
video on YouTube to help you get your
cross trainer set up:
https://youtu.be/xqgXdMBxPfw

09
www.viavito.com
Assembly Diagram

08
10 www.viavito.com
Step One.
01 Attach the front stabiliser (J-1) to the
main frame (F-1) using the two Allen
bolts (P-7).
02 Attach the rear stabiliser (K-1) to the
main frame (F-1) using the two Allen
bolts (P-7).
Assembly Instructions
Do watch our step-by-step assembly
video on YouTube to help you get your
cross trainer set up:
https://youtu.be/xqgXdMBxPfw

R 2
11
www.viavito.com
Step Two.
01 To correctly identify the left and the
right pedal arm, the inside edge of the

pedal arm. The outside edge of the
pedal plate should overhang the pedal
arm as per the diagram below.
02 Attach the left pedal arm (I-1) to the
pedal fixing (R-2) with the washers
and Allen bolt screw, as per the order
of the drawing below: first inserting
the Allen bolt screw (P-10) through
the steel washer (P-5) and placing
on the flat washer (P-12). Put that to
one side, then slide the washer (P-6)
and then the left pedal arm (I-1) onto
the pedal fixing. Place washer P-9 on
next, noting that it will only fit on one
way, and then tighten it all in place
using the Allen bolt and washers
that you set aside earlier. Use one of
the included Allen keys to screw the
pedal arm tight.
03 Repeat the same procedure to attach
the right pedal arm (I-3).

12 www.viavito.com
Step Three.
01
and unscrew the pre-assembled Allen
bolts & washers (F-23, F-24, F-25) on the
handlebar post holder of the main frame.
02 Slide the handlebar post cover (F-16)
onto the handlebar post (D-1).
03 Connect the lower computer cable in the
stem of the cross trainer (F-22) to the
connection point on the upper computer
cable that is in the handlebar post (D-2).
04 Slide the handlebar post (D-1) on
to the main frame holder and tighten
it with the Allen bolts & washers
(F-23, F-24, F-25). Ensure the Allen
bolts are tightened fully. Make sure
that the inside edge of the curved
washer is facing the post so that it
follows the contour of the curve of


the handlebar post cover (F-16) down.

13
www.viavito.com
Step Four.
01 Unscrew the pre-assembly screws (D-3)
from the handlebar post (D-1). These
screws should be disposed of. Insert
the axle (F-21) through the handlebar
post (D-1), keeping it in the centre. The
axle should be slightly greasy. If it is dry,
apply some light grease to ensure the
smooth operation of the handlebars.
02 Attach the two lower handlebars (E-1)
to the handlebar post (D-1), with the
screw & washers (P-10, -P-11, P-12, P-20,
P-14) as per the order shown below. The
lower handlebars are identical so it does
not matter which one is attached to
which side. Make sure to assemble them
the right way round, with the curve of
the handlebar facing forward.
03 Attach the two lower handlebars (E-1)
to the pedal arms (I-1, I-3), with screws
and washers (P-13, P-15).

F 19
14 www.viavito.com
Step Five.
01 Unscrew the pre-assembly screws (I-2)
on both sides of the pedal arms as per
drawing 1. The pedals are labelled left
and right for ease of assembly. Make
sure the pedals are attached the right
way round with the raised side of each
pedal at the inside against the machine.
02 Attach the pedals (F-19, F-20) to the
pedal arms (I-1, I-3), with the knob,
washer & bushing (P-16, P-17, P-18).
There are three holes at the front of
the metal plate and three at the rear so
the pedals can be attached in the pre-
ferred position.
03 Attach the two sides of the pedal arm
front covers (F-17, F-18), with the
screws (I-2, P-19).

13
15
www.viavito.com
Step Six.
01 Attach the two upper handlebars (C-1, C-4), with the 4 screws (P-8) on each side. They
are labelled left and right.

D 1
16 www.viavito.com
Step Seven.
01 Attach the handlebar (B-1) to the
handlebar post (D-1), with the screws
& washers (P-1, P-2, P-4). Then put
the cover (P-3) on.
02 Insert the hand pulse sensor cable (B-6)
through the hole of the upper right
side of the main post. There is a small
rubber grommet that the cable slots
into via a small slit.
03 Once the cable is in position, thread it
through the hole in the post and push
the rubber grommet into position in the
hole. This will hold the cable securely
and prevent it from getting damaged.

17
www.viavito.com
Step Eight.
01 Unscrew the 4 screws (A-2) at the back
of the computer (A-1).
02 Carefully plug the cables (B-6, D-2) into
the computer, making sure the holes
on cable D-2 are correctly aligned to
avoid bending the pins.
03 Push any cable slack down into the
handlebar post and attach the computer
to its bracket with the 4 screws (A-2).

18 www.viavito.com
Step Nine.
01 Plug the power supply (N) into the DC input socket on the cross trainer which is
located at the back of the machine on the frame above the rear stabiliser.
Do watch our step-by-step assembly
video on YouTube to help you get your
cross trainer set up:
https://youtu.be/xqgXdMBxPfw

19 17www.viavito.com
Before You Use Your Sina.
Mouting and Dismounting


an uneven surface, there are two sets of leg levellers located at the front and rear of the
elliptical. Turn the levelling feet located beneath the frame until the machine sits dead

Warning: This product should always be used on a level surface. Using the machine
when it is not level on the oor may damage the elliptical. Please make sure your
elliptical is not wobbling before working out.
To safely get on the elliptical and start exercising, step onto the pedal that is in the


of two handles (moving or stationary as desired).
To dismount the elliptical, slow down and wait until the pedals come to a complete stop.


NOTE: This elliptical does not free wheel so the moving parts cannot be stopped


16 20 www.viavito.com
Body Positioning
The elliptical is ergonomically designed to help encourage a good posture while
exercising. Position your body correctly to achieve better results, train safely and avoid
injury. Maintain a good upright posture keeping your back straight and your head held
high. To avoid strain in the neck and shoulders, your hands should be positioned at or


knees and enable you to fully engage your leg muscles for the best results.