Handheld Quick Start Guide See full manual for more detail
Register sprayers with serial number & date
code via website or app.
Charge Battery Remove & Fill Tank Connect Tank
1. Align tank grooves into
slide rail & lower sprayer
unit onto the tank
2. Listen for a click
3. Rotate collar to locked
position
Nozzle Settings
The optimum sprayer distance is 2-3 feet
(0.6-0.9 m) from surface being sprayed
Spray in an “S” like fashion from top to
bottom of surface areas
Start at opposite end of room & progress
toward the door to avoid walking through
spray pattern & touching sprayed surfaces
1. Rotate collar to unlocked
position
2. Pull locking ring to remove
3. Lift sprayer unit o of
the tank
4. Fill tank with water-based
chemical that is approved
to be airborne
A fully charged battery will
spray up to 4 hours before
needing to be recharged
Clean & Store Daily
• All users should follow safe cleaning practices to protect
themselves from harmful exposure when cleaning
the sprayer
• Review chemical MSDS sheet for how to secure and store
your chemical solution when not in use
• Remove all chemical from tank and ush with water
• Spray water through each nozzle size for at least
30 seconds
SPRAYER START UP
SPRAYER USE
Cleaning Nozzle
If nozzle becomes plugged, soak in hot soapy water and blow
pressurized air through to remove blockage
Current
Battery
Charge
2-3’
Remaining
Time Until
Fully Charged
Turn one-quarter turn
counterclockwise to insert nozzle
Turn clockwise until you hear a
click to change setting
Select particle size for your
chemical’s dwell time* & application:
110 microns | 15 min
80 microns | 10 min
40 microns | 5 min
*Average dwell times may vary based on
humidity, temperature, spray speed
and distance.
VP200ESK
victoryinnovations.com
(800) 741-7788
Change
setting
To insert or
remove
Always
use nozzle
wrench when
changing nozzle
Electrostatic Discharge (ESD)
In environments less conducive to natural
electrostatic charge dissipation, ESD events
may occur, resulting in a mild static shocking
sensation for the operator. To avoid this,
operators should maintain a rm grip on
the handle grounding strip & frequently
touch objects that are not being sprayed to
dissipate the negative charge that builds up
during sprayer use.
Utilize nozzle extension for better control
and reduce amount of back-spray on the
handle and user
Maintain proper grip of handle to ensure
contact to grounding strip on trigger
Hands should remain dry
during operation
To reduce any static build up in the user,
the user’s free hand should be used to
touch grounded surfaces that have not
been sprayed (e.g. metal components of
adjacent equipment)
