Videx 6700 Series User manual

66251910 - V1.1 - 15/08/21
- 1 -
6700 Series
Art.ꢀ6798 - Installation instructions
Art.ꢀ6798 7" hands free touchscreen videophone for IPure system
A
D
B
C
Fig. 1 Front
F
G
E
Fig. 2 Inside
DESCRIPTION
7” TFT high-resolution LCD monitor, OSD capacitive touch
screen, 4 buttons configurable for functions: door open, inter-
com call, auto start, camera switching, timed privacy service.
12Vdc or PoE power supply.
2 inputs / 2 outputs.
Wall mounted, white or black finish.
LEGEND
A Microphone
B Touchscreen display
C Physical programmable
buttons
D Speaker
E Connection terminals
F Ethernet connector
G USB connector for Wi-Fi
optional dongle
To download the programming software
VX IP Wizard and obtain the latest firmware
and manuals please visit the following web-
site and register
https://service.videx.it/
VIDEOPHONE INITIALISATION
If powering on the videophone (through a POE switch/router or
an external power supply unit) the display shows the message
“DEVICE NOT INITIALISED”, use the configuration software for the
VIDEX IP system (Videx IP Wizard.exe) to setup the device and the
system.
HOME SCREEN
The Home screen (Fig. 3) includes
navigation buttons, control buttons and
general information:
• Menu button
Navigate to other screens (for details
see “Menu” on pag. 4)
• Current time and date
(to set see “Date and time” on pag. 6)
• Missed calls button
View missed calls and access Event log
screen (for details see “Event log” on
pag. 3)
• Weather information and location
(to set see “Weather location” on
pag. 6)
• Control touch buttons
(for details see “Control touch
buttons” on pag. 2)
If the display is in standby, simple tap it to activate.
11:12
Thursday, 13 May 2021
24°C
0.45m/s
Menu
button Missed
calls
button
Weather
info
Control
touch
buttons
Date and
time
Fig. 3

66251910 - V1.1 - 15/08/21
- 2 -
6700 Series
Art.ꢀ6798 - Installation instructions
CONTROL TOUCH BUTTONS
OUTPUT
Shows the list of secondary services connected to the
device.
1. Tap the desired service.
2. Tap YES button to confirm
or
Tap NO button to return to Outputs screen.
Tap the button in the top left corner of the screen to return
to the Home screen.
If you can’t see all the outputs, scroll left and right by
swiping the screen with your finger.
OUTPUTS
Gate
Garden
Main entrance
Street
Back door
Lateral
Garage
Fig. 4
INTERCOMS
Shows the list of indoor stations connected to the de-
vice.
Tap the intercom you want to call: the device starts an intercom-
munication call with the selected indoor station.
or
Tap the button in the top left corner of the screen to return
to the Home screen.
For the functions allowed during a call, please see
“Intercommunicating call” on pag. 9
If you can’t see all the devices, scroll left and right by
swiping the screen with your finger.
INTERCOMS
Garage
Children's Room
Kitchen
Attic
Main entrance Bedroom
Fig. 5
CAMERAS
Shows the list of video outdoor stations and surveil-
lance cameras connected to the device.
Tap one of them to activate it: the device shows the camera output.
or
Tap the button to return to the Home screen.
For the functions allowed during a camera recall or
during a video call, please see “during a video call” on
page 8
If you can’t see all the outdoor stations or cameras, scroll
left and right by swiping the screen with your finger.
CAMERAS
Garden Main entrance Back door
Fig. 6
PRIVACY ENABLE/DISABLE
Enable or disable the Privacy service for the set time.
Press again to disable the service. Privacy service disabled
Privacy service enabled
Art.ꢀ6798 7" hands free touch screen videophone for IPure system

66251910 - V1.1 - 15/08/21
- 3 -
6700 Series
Art.ꢀ6798 - Installation instructions
Art.ꢀ6798 7" hands free touch screen videophone for IPure system
EVENT LOG
Shows the incoming, outgoing, missed and rejected
calls for the time day, month and year.
Show type of events
• Tap ALL to see all events.
• Tap MISSED to see missed calls.
• Tap REJECTED to see the calls made but rejected from the
other devices.
Event details
For each event:
• Event type icon:
Outgoing call
(green icon) Rejected call (red icon)
Incoming call
(green icon) Missed call (red icon)
Surveillance
camera
• Name of indoor/outdoor station or surveillance camera in-
volved in the event.
• Date and time.
If you can’t see all the events, scroll up and down by
swiping the screen with your finger.
Event options
Tap an event to access event options:
• Tap the green button in the bottom right corner of the
screen to recall the indoor/outdoor station or activate sur-
veillance camera.
• If the call relates to a indoor station, tap / buttons to
play the recorded audio.
Note: audio recording is only available if there is user response, otherwise nothing will be recorded. The entire conversation
will be recorded.
• If the call relates to a video door station, the device shows a snapshot of the video. Tap / buttons to play the recorded video.
Note: the max length of video recording is 1 minute.
• If the call relates to a surveillance camera, the device shows only a snapshot of the video.
• Tap the button in the top left corner of the screen to return to the Event Log screen.
Show current Month, Year and All events log
• Tap the button in the top right corner of the screen to see the list for the current month.
• Tap again button to see the list for the current year.
• Tap again button to see the list for all the events.
Notification badge
If there is one or more missed calls, you will see a red badge on the Home screen over with the number of missed events.
Clear Event Log
To clear Event Log, see “Clear Event Log” on page 7.
13 MAY 2021
11 MaY 2021
11 May 2021
13 May 2021
12 May 2021
12 May 2021
12 May 2021
13 May 2021
13 May 2021
09:36
10:18
13:58
10:26
11:50
13:03
14:35
14:49
ALL MISSED REJECTED
Main entrance
Kitchen
Attic
Bedroom
Street
Back door
Children's Room
Garage
Fig. 7
MAIN ENTRANCE
12 08 20 14:35
Fig. 8

66251910 - V1.1 - 15/08/21
- 4 -
6700 Series
Art.ꢀ6798 - Installation instructions
MENU To open the Menu tap the icon on the top left cor-
ner of the Home screen.
The following options are available:
• About
• Appearance
• Audio
• Privacy duration
• General
If you can’t see all the options, scroll up and down by
swiping the screen with your finger.
MENU
AboutAbout
Appearance
Audio
Privacy Duration
General
Fig. 9
ABOUT
Provides the following device information:
• Device part number
• Device name
• Software version
• ID
• IP address
• MAC address
• Internal temperature (in °C Degrees Celsius)
• Relative humidity
Tap the button to return to Menu.
APPEARANCE
Enables you to set the dark or light theme.
1. Tap or buttons to select the desired theme.
2. Tap the green button in the top right corner of the screen
to confirm and return to Menu
or
Tap the button to return to Menu without saving the
changes.
AUDIO
Enables you to set:
• Ringtone of outdoor station (three tones available)
• Ringtone of indoor station (three tones available)
• Ringtone of local bell (four tones available)
• Number of rings (from 1 to 10, note that the number of rings
is always the same for outdoor stations, indoor stations and
local bell)
• Call tone volume
1. Tap or buttons for each Ringtone section to select the
desired ringtone. The device will play the current ringtone.
2. Tap or buttons of the Number of rings section to select
the desired number of rings.
3. Slide slider to set the desired Call tone volume.
The device will play Tone 1 ringtone at the selected volume.
4. Tap the green button in the top right corner of the screen to confirm and return to Menu
or
Tap the button to return to Menu without saving the changes.
AUDIO
Ringtone
Cameras
Tone 1
Number of
rings
4
Ringtone
Local
Tone 4
Ringtone
Intercoms
Tone 2
Fig. 10
PRIVACY DURATION
Enables you to set the duration of Privacy service from 1 hour to 24 hours or infinite.
1. Tap or buttons to select the desired Privacy duration time.
2. Tap the green button to confirm: the device goes back to General submenu with the selected Privacy time duration
or
Tap the button to return to Menu without saving the changes.
Art.ꢀ6798 7" hands free touch screen videophone for IPure system

66251910 - V1.1 - 15/08/21
- 5 -
6700 Series
Art.ꢀ6798 - Installation instructions
If you can’t see all the options, scroll up and down by
swiping the screen with your finger.
GENERAL
In the General submenu the following options are available:
• Software update
• Network
• Language
• Date and Time
• Weather Location
• Link Videx App
• Surveillance Cameras
• Camera Setting
• Clear Event Log
• Screen Cleaning
• Reboot
SOFTWARE UPDATE
Enables you to update the device software:
1. Enter the administrator password and then tap the button.
Tap button to delete digits. Tap the button to return to Menu.
2. If the software is already the latest, the device shows the message “Lastest version already installed”
otherwise
The device starts to download the latest version available and then reboots.
NETWORK
Enables you setup and check the Internet connection.
Check the Internet connection
1. Tap Check your Internet connection: the device starts the Internet connection test and reports the results.
Wi-Fi
If you have installed the Wi-Fi optional dongle, you can connect to a Wi-Fi network.
1. Tap Wi-Fi: the device shows a switch to enable or disable the Wi-Fi connection.
2. Tap on the switch to enable Wi-Fi connection: the device shows the list of available Wi-Fi networks.
3. Select the network you want and tap the button: if necessary, enter your network password.
4. Once you are connected to the network, the device show the IP address, subnet mask, router address, network name and a but-
ton to delete the network: tap it and then tap YES to delete the network, tap NO to go back.
5. Tap the button: the device will reboot and connect to the selected network.
LANGUAGE
Enables you to select the device language from English, Italian, French, Spanish, German, Norwegian or Portuguese languages:
1. Tap or buttons to select the desired language.
2. Tap the green button to confirm: the device will reboot automatically and set the selected language.
or
Tap the button to return to Menu without saving the changes.
Art.ꢀ6798 7" hands free touch screen videophone for IPure system

66251910 - V1.1 - 15/08/21
- 6 -
6700 Series
Art.ꢀ6798 - Installation instructions
DATE AND TIME
Enables you to set your timezone or set date and time manually.
The current date, time and timezone are shown on the
first line.
Set timezone
1. Tap Set Timezone.
2. Tap or left buttons to select the desired geographic area
or UTC (Coordinated Universal Time).
• If you select a geographic area, you can select your city with
the or buttons to the right.
• If you select UTC, you can select the UTC offset hours by in-
creasing/decreasing with the or buttons to the right.
• You can also select the UTC hours offset directly from the
left scroll menu.
3. Tap the green button to confirm: the device will reboot au-
tomatically and set the selected timezone
or
Tap the button to return to Menu without saving the
changes.
Set date and time manually
1. Tap Set date and time manually.
2. Tap or buttons of the corresponding fields to set Year,
Month, Day, Hour and Minute.
3. Tap the green button to confirm: the device goes back to
Date and Time menu with the selected date and time
or
Tap the button to return to Menu without saving the
changes.
SET TIMEZONE
Riga
Rome
Samara
Australia
Europe
Indian
Fig. 11
SET TIME MANUALLY
Year
2021
Month
5
Day
13
Hour
11
Minute
12
Fig. 12
WEATHER LOCATION
Enables you to set the desired location for weather information.
1. Type the location with the touchscreen keyboard.
2. A list of locations will appear: tap the desired location.
3. Tap the green button to confirm: the device goes back to General menu with the selected weather location
or
Tap the button to return to the General menu: a message will appear to save changes or not: tap NO to go back to
edit location or tap YES to discard the changes and return to the General submenu.
LINK VIDEX APP
Enables the device to be connected to the Videx CloudNected
smartphone app.
1. Enter administrator password and then tap the button.
Tap button to delete digits. Tap the button to return to
Menu.
2. Once you enter the correct password the device shows the QR
binding code.
3. Open Videx CloudNected app on your smartphone, login or
register (if you are not registered yet).
4. Tap the icon on the top left corner of the app, next tap “De-
vice Manager” and then tap button on the top right corner
of the screen.
5. Scan the QR code: now your smartphone is connected with
the device.
LINK VIDEX APP
93C2C369A9FEADCF9D16BFF18451EBDE
Scan this QR Code
Fig. 13
Art.ꢀ6798 7" hands free touch screen videophone for IPure system

66251910 - V1.1 - 15/08/21
- 7 -
6700 Series
Art.ꢀ6798 - Installation instructions
Art.ꢀ6798 7" hands free touch screen videophone for IPure system
SURVEILLANCE CAMERAS
Enables you to add, edit or delete surveillance cameras.
1. Enter the administrator password and then tap the button.
2. The device lists the surveillance cameras connected
3. If you tap one of them you can edit description name and ad-
dress or remove it.
4. If you tap ADD CAMERA you can add a new camera (if it’s
present on the system) by entering:
• Description name
• Complete RTSP URL address
You can also enable Authentication tapping the switch and
entering username and password
5. Tap the green button to confirm: the new camera will ap-
pear in the list and in Camera menu
or
Tap the button to return to the Surveillance Cameras
submenu: a message will appear to save changes or not.
Tap NO to go back to edit parameters or tap
YES to discard the changes and return to the Sur-
veillance Cameras submenu.
SURVEILLANCE CAMERAS
Garden
ADD CAMERA
Fig. 14
SURVEILLANCE CAMERAS
Back door
Remove Camera
rtsp://192.168.2.101:554
mike.conrad
Authentication
Fig. 15
CAMERA SETTINGS
Enables you to adjust contrast, brightness and hue of the pic-
ture coming from any outdoor station.
1. Enter the administrator password and then tap the button.
2. The device show the list of the video outdoor stations con-
nected: tap one of them to adjust it.
3. The device shows the picture coming from the selected cam-
era: slide contrast, brightness and hue sliders to ad-
just the image, the results are immediately visible.
4. Tap the green button to confirm: the device saves the set-
tings and goes back to the Home screen
or
Tap the button to return to the General menu: a message
will appear to save changes or not: tap NO to go
back to adjust or tap YES to discard the changes
and return to Home screen.
MAIN ENTRANCE SETTINGS
Fig. 16
CLEAR EVENT LOG
Enables you to delete the Event log.
1. Enter the administrator password and
then tap the button.
2. Tap YES button to confirm
or
Tap NO button to return to
General submenu.
SCREEN CLEANING
Enables you to disable touch screen for
10 seconds for screen cleaning.
1. Tap YES button to start
Screen cleaning mode: a 10 seconds
countdown will start.
or
Tap NO button to return to
General submenu.
2. At the end of countdown the device
goes back to General submenu and the
touchscreen is available again.
REBOOT
Enables you to reboot the device.
1. Tap YES button to reboot or
NO button to return to Gen-
eral submenu.

66251910 - V1.1 - 15/08/21
- 8 -
6700 Series
Art.ꢀ6798 - Installation instructions
DURING A VIDEO CALL
MAIN ENTRANCE SETTINGS
Fig. 17
MAIN ENTRANCE
Fig. 18
During a call coming from an outdoor station (or during a cam-
era recall) you’re able to make the following operations and ad-
justments:
Activate a secondary service
Activate a secondary camera input
Enable or disable microphone
Audio/Video adjustments
Take a snapshot
Reject or close the call
ACTIVATE A SECONDARY SERVICE
1. Tap icon: an overlay menu will appear with secondary ser-
vices available.
2. Tap one of them, then tap YES to activate it and
return to the previous screen.
Tap NO to return to the previous screen without
activating any secondary service.
3. Tap again to close the overlay menu.
ACTIVATE A SECONDARY CAMERA INPUT
1. Tap icon: an overlay menu will appear with secondary cam-
era’s available.
2. Tap one of them: you will see camera image in Picture in Pic-
ture mode.
3. Tap on Picture in Picture to show it in full screen: in this mode
you can view the input from other camera’s using the buttons.
4. Tap the image to close the full screen mode and return to Pic-
ture in Picture mode.
5. Tap to close the secondary video.
6. Tap again to close the overlay menu.
ENABLE OR DISABLE MICROPHONE
1. Tap icon to disable the microphone
2. Tap again to reactivate it.
Microphone enabled
Microphone disabled
AUDIO/VIDEO ADJUSTMENTS
1. Tap icon: the following sliders will appear::
Contrast
Brightness
Hue
Microphone volume
Speaker volume
2. Slide any of them to make the related adjustment.
Tap again to close the menu.
TAKE A SNAPSHOT
By default, on every videocall or camera recall, the device takes a
snapshot that will be a still frame of the video recording.
If you tap icon the still frame will be overwritten.
To see the snapshot and the related video go to Event log and
tap the related event. For details see “Event log” on page 3.
REJECT OR CLOSE THE CALL
Tap to reject or close the call
Art.ꢀ6798 7" hands free touch screen videophone for IPure system

66251910 - V1.1 - 15/08/21
- 9 -
6700 Series
Art.ꢀ6798 - Installation instructions
Art.ꢀ6798 7" hands free touch screen videophone for IPure system
INTERCOMMUNICATING CALL
MAIN ENTRANCE
Fig. 19
MAIN ENTRANCE
Fig. 20
During a call coming from an indoor station you’re able to make
the following operations and adjustments:
Enable or disable microphone
Audio adjustments
Reject or close the call
ENABLE OR DISABLE MICROPHONE
1. Tap icon to disable the microphone
2. Tap again to reactivate it.
Microphone enabled
Microphone disabled
AUDIO ADJUSTMENTS
1. Tap icon: the following sliders will appear:
Microphone volume
Speaker volume
2. Slide any of them to make the related adjustment.
Tap again to close the sliders menu.
REJECT OR CLOSE THE CALL
Tap to reject or close the call
TACTILE PROGRAMMABLE PUSH BUTTONS
The four tactile buttons (Fig. 1 C) are fully programmable using
the programming software VX IP Wizard.
CONNECTION TERMINALS SIGNALS
GND 12 Vdc - 650mA power supply input.
This is not used if the videophone is connected to a
POE Switch or Router
12V
GND RS-485 connectionB
A
GNDI Ground for IN1 and IN2 inputs
IN2 Active low input 2
IN1 Active low input 1
OUT2 Relay 2 - C & NO dry contacts Max 35Vdc
50mA
OUT2
OUT1 Relay 1 - C & NO dry contacts
OUT1
TECHNICAL SPECIFICATIONS
Housing and mounting: 6700 Series - Surface
Push buttons: 4
Programming: Through touchscreen or PC Wizard
software
Power consumption: Stand-by: 400mA
Operating 600mA
Working voltage: 12Vdc - 650mA or POE
Working temperature: -20 +60 °C

66251910 - V1.1 - 15/08/21
- 10 -
6700 Series
Art.ꢀ6798 - Installation instructions
Art.ꢀ6798 7" hands free touch screen videophone for IPure system
WALL MOUNTINGI INSTRUCTIONS
12
A
A
Fig. 1 Fig. 2
135cm
Fig. 3
Fig. 4
B
Fig. 5 Fig. 6
2
1
Fig. 7
WARNING: Remeber to remove the mains before installing the videomonitor.
1. Remove the cover inserting a 5.5mm flat screwdriver into both the clips A then rotate clockwise until you listen a “CLICK!” (Fig. 1).
2. Pull outwards the left part of the cover. Don’t pull the cover straight (Fig. 2).
3. Put the cover in a horizontal position on the wall leaving approx 135cm between the lower side of the back cover and the
finished floor (Fig. 3).
4. Mark the point for the fixing holes remembering that the wires must be fed through the hole B (Fig. 4).
5. Make the holes, insert the wall plugs and fix the back cover with the screws feeding the wires into the hole B (Fig. 5).
6. Connect the wires to the terminals following the provided installation diagram and the Ethernet cable to LAN connector (Fig. 6).
7. Close the unit: first hook in the right part and then the left part until you hear a “CLICK!” (Fig. 7).

66251910 - V1.1 - 15/08/21
- 11 -
Switch PoE
Switch PoE
Switch PoE
22
2
2
2
2
2505
2505
Rif.SLD_IPURE_V_001

66251910 - V1.1 - 15/08/21
- 12 -

66251910 - V1.1 - 15/08/21
- 13 -

66251910 - V1.1 - 15/08/21
- 14 -

66251910 - V1.1 - 15/08/21
- 15 -
DISPOSAL
In accordance with the Legislative Decree no. 49 of 14 March 2014 “Implementation of the Directive 2012/19/EU on waste
electrical and electronic equipment (WEEE)”.
The crossed-out bin symbol on the equipment or on the packaging indicates that when the product reaches the end of
its lifetime, it must be collected separately from mixed municipal waste. The user must, therefore, dispose of the equip-
ment at the end of its lifetime in the suitable waste collection centres or bring it to the retailer during the purchase of a
new equipment of equivalent type at the ratio of one-to-one. Furthermore, the user is allowed to dispose of the WEEEs
of very small size (domestic appliances without any external dimension exceeding 25 cm (9.84 inches) for free to the
retailers, without any purchase obligation. The correct waste disposal of the WEEEs contributes to their reuse, recycling
and recovery and avoids potential negative effects on the environment and human health due to the possible presence
of dangerous substances within them.
SMALTIMENTO
Ai sensi del Decreto Legislativo 14 marzo 2014, n° 49 “Attuazione della direttiva 2012/19/UE sui rifiuti di apparecchiature
elettriche ed elettroniche (RAEE)”.
Il simbolo del cassonetto barrato riportato sull’apparecchiatura o sulla sua confezione indica che il prodotto alla fine della
propria vita utile deve essere raccolto separatamente dagli altri rifiuti urbani misti. L’utente dovrà, pertanto, conferire l’appa-
recchiatura giunta a fine vita presso gli idonei centri di raccolta differenziata oppure riconsegnarla al rivenditore al momento
dell’acquisto di una nuova apparecchiatura di tipo equivalente, in ragione di uno a uno. L’utente ha, inoltre, la possibilità di
conferire gratuitamente presso i distributori, senza alcun obbligo di acquisto, per i RAEE di piccolissime dimensioni (per le
apparecchiature di tipo domestico con nessuna dimensione esterna superiore a 25 cm).
L’adeguata raccolta differenziata dei RAEE contribuisce al loro riutilizzo, riciclaggio e recupero ed evita potenziali effetti nega-
tivi sull’ambiente e sulla salute umana dovuti alla eventuale presenza di sostanze pericolose al loro interno.
ÉLIMINATION
Conformément au décret législatif n ° 49 du 14 mars 2014 relatif à l’ꢀ«ꢀApplication de la directive 2012/19 / UE relative aux
déchets d’équipements électriques et électroniques (DEEE)ꢀ».
Le symbole de la poubelle barrée sur l’équipement ou sur son emballage indique que le produit en fin de vie utile doit être
collecté séparément des autres déchets municipaux en mélange. L’utilisateur doit donc remettre l’équipement en fin de
vie aux centres de collecte appropriés ou le restituer au revendeur lors de l’achat d’un nouveau type d’équipement équi-
valent, dans le rapport de un à un. De plus, l’utilisateur a la possibilité de conférer gratuitement aux distributeurs, sans au-
cune obligation d’achat, de très petits DEEE (pour les appareils ménagers sans dimensions extérieures supérieures à 25 cm).
La collecte séparée adéquate des DEEE contribue à leur réutilisation, leur recyclage et leur valorisation et évite les éventuels
effets négatifs sur l’environnement et la santé humaine en raison de la présence possible de substances dangereuses dans
ceux-ci.
ELIMINACIÓN
De conformidad con el Decreto legislativo n. 49 de 14 de marzo 2014 “Aplicación de la Directiva 2012/19/UE relativa a resi-
duos de aparatos eléctricos y electrónicos (RAEE)”.
El símbolo del contenedor tachado indicado sobre los aparatos o sobre los embalajes señala que el producto al final de su
vida útil debe ser recogido separadamente de otros residuos municipales mezclados. Por tanto, el usuario deberà conferir los
aparatos al final de su vida útil en los apropriados centros de recogida selectiva o devolverlos al revendedor al momento de
la compra de nuevos aparatos equivalentes, en una relación de uno a uno. Además, el usuario tiene la posibilidad de entre-
gar sin cargo a los distribuidores, sin ninguna obligación de compra, los RAEEs muy pequeños (para electrodomésticos sin
dimensiones externas superiores a 25 cm).
La recogida selectiva apropriada de los RAEEs contribuye a su reutilización, reciclaje y valorización y evita potenciales impactos
negativos sobre el medio ambiente y la salud humana debidos a la possible presencia de substancias peligrosas dentro de ellos.
ELIMINAÇÃO
De acordo com o Decreto Legislativo n.º 49 de 14 de março de 2014 “Implementação da Diretiva 2012/19/UE relativa
aos resíduos de equipamentos elétricos e eletrónicos (REEE)”.
O símbolo do caixote do lixo riscado no equipamento ou na embalagem indica que quando o produto atinge o fim
da sua vida útil, deve ser recolhido separadamente dos resíduos urbanos mistos. O utilizador deve, portanto, elimi-
nar o equipamento no final da sua vida útil nos centros de recolha de resíduos adequados ou levá-lo ao vendedor
durante a compra de um novo equipamento de tipo equivalente, na proporção de um para um. Além disso, o utili-
zador pode eliminar gratuitamente os REEE de dimensões muito reduzidas aos vendedores, sem qualquer obrigação
de compra.(só aparelhos domésticos sem qualquer dimensão externa que exceda 25 cm, ou seja 9,84 polegadas).
A correta eliminação dos REEE contribui para a sua reutilização, reciclagem e recuperação e evita potenciais efeitos
negativos sobre o ambiente e a saúde humana devido à possível presença de substâncias perigosas no seu interior.
VERWIJDERING
In overeenstemming met het Wetsbesluit nr. 49 van 14 maart 2015 “Implementatie van de Richtlijn 2012/19/EU
inzake afgedankte elektrische en elektronische apparaten (AEEA)”.
Het doorgekruiste vuilnisbaksymbool op het apparaat of de verpakking geeft aan dat het product aan het einde van
zijn levensduur niet samen met het gewone huisvuil weggegooid mag worden. De gebruiker moet het apparaat aan
het einde van zijn levensduur inleveren bij een gepast inzamelpunt of de winkel waar hij een nieuw apparaat van
een gelijksoortig type zal kopen. De gebruiker kan tevens AEEA’s van een zeer klein formaat (huishoudapparaten
met een buitenafmeting kleiner dan 25 cm (9,84 inch) gratis en zonder enige aankoopverplichting bij handelaars
inleveren. Een juiste verwijdering van AEEA’s draagt bij tot hergebruik, recycling en terugwinning, en voorkomt
potentiële negatieve effecten op het milieu en de menselijke gezondheid door de mogelijke aanwezigheid van
gevaarlijke stoffen.

MANUFACTURER
FABBRICANTE
FABRICANT
FABRICANTE
FABRIKANT
FABRICANTE
ﻉﺓﻼﻤﺼﻧ
ﻙﺓ �ﻻ
VIDEX ELECTRONICS S.P.A.
Via del Lavoro, 1
63846 Monte Giberto (FM) Italy
Tel [phone]
Fax [phone]
www.videx.it - inf[email protected]
CUSTOMER SUPPORT
SUPPORTO CLIENTI
SUPPORTS CLIENTS
ATENCIÓN AL CLIENTE
KLANTENDIENST
APOIO AO CLIENTE
ﺀꢀﻼﻌﻣ
ﺓꢁﺥﺩ
VIDEX ELECTRONICS S.P.A.
www.videx.it - [e-mail]
Tel: [phone]
Fax: [phone]
UK Customers only:
VIDEX SECURITY LTD
www.videxuk.com
Tech Line: 0191 224 3174
Fax: [phone]
Main UK office:
VIDEX SECURITY LTD
1 Osprey Trinity Park
Trinity Way
LONDON E4 8TD
Phone: [phone]
Fax: [phone]
www.videxuk.com
[email protected]
Northern UK office:
VIDEX SECURITY LTD
Unit 4-7
Chillingham Industrial Estate
Chapman Street
NEWCASTLE UPON TYNE - NE6 2XX
Tech Line: ([phone]
Phone: [phone]
Fax: [phone]
Greece office:
VIDEX HELLAS Electronics
48 Filolaou Str.
11633 ATHENS
Phone: [phone]
([phone]
Fax: [phone]
www.videx.gr
[email protected]
Danish office:
VIDEX DANMARK
Hammershusgade 15
DK-2100 COPENHAGEN
Phone: [phone]
Fax: [phone]
www.videx.dk
[email protected]
Benelux office:
NESTOR COMPANY NV
E3 laan, 93
B-9800 Deinze
Phone: [phone]
Fax: [phone]
www.videx.be
[email protected]
Dutch office:
NESTOR COMPANY BV
Business Center Twente (BCT)
Grotestraat, 64
NL-7622 GM Borne
www.videxintercom.nl
[e-mail]
The product is CE marked demonstrating its conformity and is for distribution with-
in all member states of the EU with no restrictions. This product follows the provi-
sions of the European Directives 2014/30/EU (EMC); 2014/35/EU (LVD); 2011/65/EU
(RoHS): CE marking 93/68/EEC.
Il prodotto è marchiato CE a dimostrazione della sua conformità e può essere distri-
buito liberamente all’interno dei paesi membri dell’Unione Europea UE.
Questo prodotto è conforme alle direttive Europee: 2014/30/UE (EMC); 2014/35/UE
(LVD); 2011/65/UE (RoHS): marcatura CE 93/68/EEC.
Le produit est marqué CE à preuve de sa conformité et peut être distribué librement
à l’intérieur des pays membres de l’union européenne EU.
Ce produit est conforme aux directives européennes 2014/30/EU (EMC) ; 2014/35/
EU (LVD) ; 2011/65/EU (RoHS): marquage CE 93/68/EEC.
El producto lleva la marca CE que demuestra su conformidad y puede ser distribuido
en todos los estados miembros de la unión europea UE.
Este producto cumple con las Directivas Europeas 2014/30/EU (EMC); 2014/35/EU
(LVD); 2011/65/EU (RoHS): marca CE 93/68/EEC.
Het product heeft de CE-markering om de conformiteit ervan aan te tonen en is be-
stemd voor distributie binnen de lidstaten van de EU zonder beperkingen. Dit pro-
duct volgt de bepalingen van de Europese Richtlijnen 2014/30/EU (EMC); 2014/35/
EU (LVD); 2011/65/EU (RoHS): CE-markering 93/68/EEG.
O produto tem a marca CE que demonstra a sua conformidade e destina-se a dis-
tribuição em todos os estados membros da UE, sem restrições. Este produto segue
as disposições das Diretivas Europeias 2014/30/UE (EMC); 2014/35/UE (LVD);
2011/65/UE (RoHS): marcação CE 93/68/CEE.
ﻢﻛﺎﻨﻳﺓﺇﻭ ﻝﺓﺹ ꢀꢁ ﺕꢁﺫ ﻑﺎﺗꢂꢁꢃꢄꢀꢁ ﻢﻋ ﻖﻫ ꢅꢁꢃꢆ ﺭﺍꢇﻅ ꢉ CE �ﻭﺭﻭꢉꢁ ꢋꢅꢁꢃꢌꢀꢁ ﻡﺓꢍꢎ ꢏꢌꢐꢄꢀꢁ ꢑꢄﺡꢒ
ﺎﺗ ꢇﺞﻳꢃꢌꢀꢁ ﺎﺗ ꢓﻂﻟꢌﻡ ﻲﻋ ꢄﺝ ꢏꢌꢐꢄꢀꢁ ꢁꢕꢖ ꢗﻝ ꢒ .ﺩꢃﻱ ꢘ ﺓꢒꢙ ꢚﻭꢛꢜ �ﻭﺭﻭꢉꢁ ﺩﺡﺍꢆꢉꢁ ꢝﻭﺩ ﺓꢅﺍꢞ ꢠ ﻩꢡꢒﺯ ꢃꢆ
ﻕﺓ ꢜﻁﺍꢄꢀꢁ ﻡﺓꢍꢎ ꢢ:RoHS( ــ EU/65/2011 ;:EU :LVD/35/2014 ;:EU :EMC/30/2014 ﺓﻱ ꢜﻭﺭﻭꢉꢁ
.EEC/68/93 CE ﻱﺓ ꢜﻭﺭﻭꢉꢁ ﻑﺎﺗꢂꢁꢃꢄﻝ ꢀ