Viega 8330.2 User manual

Model Year built:
8330.2 from 05/2014
en_INT
Viega Mono WC block
Instructions for Use

Viega Mono WC block 2 from 26

Table of contents
1About these instructions for use 4
1.1 Target groups 4
1.2 Labelling of notes 4
1.3 About this translated version 5
2Product information 6
2.1 Intended use 6
2.1.1 Areas of use 6
2.2 Product description 7
2.2.1 Overview 7
2.2.2 Compatible components 9
2.2.3 Sound protection 10
2.2.4 Technical data 10
2.3 Required accessories 11
3Handling 12
3.1 Assembly information 12
3.1.1 Mounting conditions 12
3.1.2 Installation dimensions 12
3.1.3 Required tools and materials 13
3.2 Assembly 14
3.2.1 Preparing mounting 14
3.2.2 Mounting the Viega Mono 18
3.2.3 Preparing optional actuation versions 22
3.2.4 Fixing the Viega Mono WC block 23
3.2.5 Setting the flush volume 24
3.3 Cleaning and maintenance 25
3.4 Disposal 26
Table of contents
Viega Mono WC block 3 from 26

1 About these instructions for use
Trade mark rights exist for this document; for further information, go to
viega.com/legal .
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
nHeating and sanitary professionals and trained personnel
It is not permitted for individuals without the abovementioned training or
qualification to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2 Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns against possible life-threatening injury.
WARNING!
This symbol warns against possible serious injury.
CAUTION!
This symbol warns against possible injury.
NOTICE!
This symbol warns against possible damage to property.
Notes give you additional helpful tips.
About these instructions for use
Viega Mono WC block 4 from 26

1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand-
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
Viega Mono WC block 5 from 26

2 Product information
2.1 Intended use
2.1.1 Areas of use
The Viega Mono WC block is suitable for walling in and around, for
single mounting, for line mounting, and stand-alone mounting. The
closed casing of the Viega Mono WC block is made of expanded poly-
styrene (EPS), offers sound protection and serves as render base. Flush
actuation is possible from the front or the top for WC ceramic types with
a projection of more than 500 mm. With WC ceramic types with a pro-
jection of under 500 mm, flush actuation is possible from the top only.
This model is equipped with dual flush technology and is delivered
without flush plates. For complete mounting, a Visign flush plate must
be purchased additionally.
Product information
Viega Mono WC block 6 from 26

2.2 Product description
2.2.1 Overview
1
2
3
4
6
5
Fig. 1: Components
1 Protective cover (flush actuation is possible from the top and the
front)
2 Viega Mono WC block with noise-insulating EPS casing and pre-
mounted 2L concealed cistern
3 Guide rail of the Viega Mono WC block
4 Mounting bracket for drain elbow
5 Revision frame for the cistern
6 Water connection
Product information
Viega Mono WC block 7 from 26

1
2
3
4
7
6
5
Fig. 2: Accessories
1 Mounting angles for wall mounting
2 WC connection elbow, PP, DN 90, with seal and eccentric WC
adapter, PP, DN 90/100, with seal
3 Mounting rail
4 Fixing material: threaded rods for fixing sanitary objects, and fixing
screws
5 Protective plug for flushing pipe and connection elbow
6 WC connection socket with lip seal
7 Flushing pipe with flushing pipe connector and mounting set
Product information
Viega Mono WC block 8 from 26

2.2.2 Compatible components
The Viega Mono WC block can be supplemented with the following
flush plates:
nflush plate Standard 1, model 8180.1
nVisign for Style 10, model 8315.1
nVisign for Style 11, model 8331.1
nVisign for Style 12, model 8332.1
nVisign for Style 12, model 8332.4
nVisign for Style 13, model 8333.1
nVisign for Style 14, model 8334.1
nVisign for Style functional unit, model 8332.3
nVisign for Public 1, model 8326.1
nVisign for Public 2, model 8327.1
nVisign for Public, remote actuation, model 8326.21
nVisign for Public, cover plate, model 8326.9
nVisign for More 100, model 8352.1
nVisign for More 101, model 8351.1
nVisign for More 102, model 8353.1
nVisign for More 104, model 8354.1
nVisign for More 100 sensitive, model 8352.11
nVisign for More 100 sensitive, model 8352.12
nVisign for More 103 sensitive, model 8351.11
nVisign for More 103 sensitive, model 8353.12
nVisign for Care sensitive, model 8352.21
As a precondition for using the models of the Visign for More sensitive
series, a suitable type of WC ceramic must be selected. The following
types of WC ceramic are unsuitable: Those whose WC lid, when raised,
covers the flush plate in whole or in part, unintentionally enabling flush
actuation.
For more details on the respective versions, see the 'Practice manual'.
The Viega Mono WC block can be supplemented with the following
electronic flush actuation devices:
nWC flush actuation, model 8350.32
Compatible flush plates
Compatible electronic flush actuation devices
Product information
Viega Mono WC block 9 from 26

The Viega Mono WC block is compatible with common WC ceramic
types. All components required for wall mounting are comprised in the
scope of delivery of a Viega Mono WC block (
ÄChapter 2.2.1 „Over-
view“ on page 7 ).
The following compatible components can be used for extensions:
nMounting rail for line mounting, including adjustment and fixing
material, model 8001
nViega Mono standing bracket for stand-alone mounting, model
8310.45
nViega Mono mounting set, mounting aid, model 8310.5
nAccessories: Viega Mono mounting set, elbow, model 8310.54
2.2.3 Sound protection
The compact casing of the Viega Mono product series consist of
expanded polystyrene (EPS). This material offers effective sound pro-
tection and serves as render base. No further soundproofing measures
are required.
The minimum thickness for plaster on the polystyrene body must be
15 mm including tiles.
2.2.4 Technical data
The product has the following technical data:
Connection elbow DN 90, PP
Fitting connection, pre-mounted
corner valve, factory-fitted on left
Rp ½
Maximum height from upper edge
of the finished floor
820 mm
cistern Concealed cistern 2L: Concealed
cistern with actuation from front
and from above, pre-mounted
water path
Cistern volume 9 litres
Flushing technology Dual flush technology: Small flush
setting range from approx. 3 up to
approx. 4 litres, large flush volume
continuously adjustable from
approx. 6 to approx. 9 litres
Other compatible components
Sound and site protection through EPS
Product information
Viega Mono WC block 10 from 26

2.3 Required accessories
For complete mounting, you require a Visign flush plate. Compatible
flush plates are listed in the chapter
ÄChapter 2.2.2 „Compatible com-
ponents“ on page 9 .
You require the Viega Mono standing bracket model 8310.45 to enable
the stand-alone mounting of the Viega Mono WC block.
flush plate
Standing bracket for stand-alone mounting
Product information
Viega Mono WC block 11 from 26

3 Handling
3.1 Assembly information
3.1.1 Mounting conditions
The Viega Mono WC block can be mounted with a Viega Mono standing
bracket, model 8310.45, free-standing or on an even wall.
The maximum construction height from the UEFFL is 820 mm.
3.1.2 Installation dimensions
Fig. 3: Dimensional drawing
Stand-alone mounting or wall mounting
Construction height
Handling
Viega Mono WC block 12 from 26

3.1.3 Required tools and materials
The following tools are required for mounting:
nDrill with 10 mm drill bit
nFork or ring spanner, size 13 and size 17
nRatchet with sockets, 13 and 17 mm
nscrewdriver
nSpirit level
The following tools, which are not comprised in the scope of delivery,
are required for mounting:
nMaterial for bricking in the block
nFlush plate for the WC
nConcrete lintel above the WC block, if the block is room-high or the
block is mounted in a niche
nfor a line mounting: mounting rail (model 8001)
Required tools
Required material
Handling
Viega Mono WC block 13 from 26

3.2 Assembly
3.2.1 Preparing mounting
Actuation can take place optionally from the front or the top. The actua-
tion is pre-mounted from the front in delivery condition. To convert
actuation from above, proceed as follows:
Remove the front cistern cover.
Press the bow of the drain valve backwards from the bracket of the
mechanism.
Turn the mechanism's lock by 90° in an anti-clockwise direction.
ðThe mechanism is unlocked and can be removed.
Converting the flush actuation
Handling
Viega Mono WC block 14 from 26

Remove mechanism.
Remove cover.
Insert the mechanism into the cistern from above.
In doing so, ensure that the tracks on the top and bottom edge of
the mechanism are in the indentations in the revision shaft of the
cistern.
Turn the mechanism's lock by 90° in a clockwise direction.
ðThe mechanism is locked.
Handling
Viega Mono WC block 15 from 26

Hang the bow of the mechanism in the bow of the drain valve.
Insert cistern cover from above.
Insert the revision frame and the cover in the front.
Handling
Viega Mono WC block 16 from 26

Three mounting versions are available:
nSingle mounting with supplied mounting rail, standard mounting
nLine mounting with 3000 mm mounting rail (not included in scope of
delivery)
nStand-alone mounting with standing bracket (not included in the
scope of delivery)
1
2
3
4
Fig. 4: Accessories for mounting versions line mounting and stand-alone mounting
1 Mounting rail for line mounting
2 Fixing material mounting rail
3 Viega Mono standing bracket for stand-alone mounting
4 Fixing material standing bracket
Note the required dimensions and minimum distances.
Have the material required for line mounting ready (mounting rail,
model 8001 and fixing material).
Have the material required for stand-alone mounting ready (Viega
Mono standing bracket, model 8310.45).
Preparing the mounting versions
Handling
Viega Mono WC block 17 from 26

3.2.2 Mounting the Viega Mono
Single mounting (standard mounting) and line mounting
A standard mounting, a single mounting with supplied
mounting rail, is described in this chapter. For a line
mounting, one or more 3000-mm-mounting rails (model
8001) are required. The mounting steps are all identical.
INFO! Fixing height of the WC ceramic The fixing height of the
WC ceramic is the drill hole height for rail mounting.
Determine the drill hole height for rail mounting.
Determine drill hole position. Line the mounted Viega Mono WC
block with bricks 300 mm each at both sides.
With the help of the mounting rail and a spirit level, mark two drill
hole positions and drill holes.
Screw the mounting rail tight using the fixing screws supplied.
Line mounting
For line mounting, fix further mounting rails as described.
Fit threaded rod with an interval of 340 mm between them onto the
mounting rail.
Turn in threaded rods for fixing sanitary objects
Wall mounting with mounting rail
OKFFB
320
Handling
Viega Mono WC block 18 from 26

Attach the bottom part of the block. Guide the threaded rods
through the guide rail of the Viega Mono WC block.
Attach threaded rods.
Place the upper part of the Viega Mono WC block onto the mounted
bottom part of the block.
Fit mounting angle.
Align Viega Mono WC block on the wall using a spirit level.
Mark bore hole and drill hole (10 mm).
Screw on mounting angle.
Handling
Viega Mono WC block 19 from 26

Fit and clip in drain elbow.
Fit revision frame with site protection at the front.
Line mounting
For line mounting, attach additional Viega Mono WC blocks
as described above.
click
Handling
Viega Mono WC block 20 from 26