Viega 8570.34 User manual

For support hinged handles
Model Year built:
8570.34 from 10/2018
en_INT
Prevista Dry frame element 1120–1300 mm
Instructions for Use

Prevista Dry frame element 1120–1300 mm 2 from 9

Table of contents
1About these instructions for use 4
1.1 Target groups 4
1.2 Labelling of notes 4
1.3 About this translated version 5
2Product information 6
2.1 Intended use 6
2.1.1 Areas of use 6
2.2 Product description 6
2.2.1 Overview 6
3Handling 7
3.1 Assembly information 7
3.1.1 Installation dimensions 7
3.2 Assembly 7
3.2.1 Mounting in Prevista Dry Plus 7
3.3 Disposal 9
Table of contents
Prevista Dry frame element 1120–1300 mm 3 from 9

1 About these instructions for use
Trade mark rights exist for this document; for further information, go to
viega.com/legal.
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
nHeating and sanitary professionals and trained personnel
nDrywall builder
Individuals without the abovementioned training or qualification are not
permitted to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2 Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns of possible life-threatening injury.
WARNING!
This symbol warns of possible serious injury.
CAUTION!
This symbol warns of possible injury.
NOTICE!
This symbol warns of possible damage to property.
This symbol gives additional information and hints.
About these instructions for use
Prevista Dry frame element 1120–1300 mm 4 from 9

1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e.g. EN) and/or in Germany
(e.g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand‐
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
Prevista Dry frame element 1120–1300 mm 5 from 9

2 Product information
2.1 Intended use
2.1.1 Areas of use
The Prevista Dry Plus fixing element is used for fixing support hinged
handles onto Prevista Dry WC elements in a Prevista Dry Plus pre-wall
construction.
2.2 Product description
2.2.1 Overview

Fig. 1: Component overview
1 Prevista Dry Plus fixing element
2 Screws for fixing
3 slot nuts
4 fixing bolts
Product information
Prevista Dry frame element 1120–1300 mm 6 from 9

3 Handling
3.1 Assembly information
3.1.1 Installation dimensions


Fig. 2: Dimensions
3.2 Assembly
3.2.1 Mounting in Prevista Dry Plus
The two vertical mounting rails, which surround the element,
must be open towards the module and have an inner dis‐
tance of 420 mm.
Fixing without WC element
Handling
Prevista Dry frame element 1120–1300 mm 7 from 9

Secure the element onto the open mounting rail with the slot nuts
supplied:
Insert the slot nut into the opening of the module.
Push the slot nut in until it engages.
Set the height of the mounting rail.
Fasten the slot nut.
25 Nm
Handling
Prevista Dry frame element 1120–1300 mm 8 from 9

Set the heights of the element.
Fasten the mounting rail (model 8401) at the wall pursuant to the
instructions for use for the Prevista Dry Plus system.
Use the bolts to fasten the element to the mounting rails.
3.3 Disposal
Separate the product and packaging materials (e. g. paper, metal,
plastic or non-ferrous metals) and dispose of in accordance with valid
national legal requirements.
İ

9
Fixing at the Prevista Dry WC element

Ĭ
Handling
Prevista Dry frame element 1120–1300 mm 9 from 9