Viessmann Vitovolt 200 Operating instructions

Operating instructions
for the system user
VIESMANN
VITOVOLT 200
5609 704 GB 11/2016 Please keep safe.

2
Please follow these safety instructions closely to
prevent accidents and material losses.
Safety instructions explained
Danger
This symbol warns against the risk of injury.
!Please note
This symbol warns against the risk of material
losses and environmental pollution.
Target group
These operating instructions are intended for system
users.
This appliance can also be operated by children of 8
years and older, as well as by individuals with reduced
physical, sensory or mental faculties or those lacking
in experience and knowledge, provided such individu-
als are being supervised or have been instructed in the
safe use of this appliance as well as in any risks aris-
ing from it.
!Please note
Supervise children in the proximity of the appli-
ance.
■Never permit children to play with the appli-
ance.
■Cleaning and maintenance must not be car-
ried out by unsupervised children.
Appliance connection
■The appliance may only be connected and commis-
sioned by authorised contractors.
■Observe the specified electrical connection require-
ments.
■Modifications to the existing installation may only be
carried out by authorised contractors.
Danger
Incorrectly executed work on the system can
lead to life-threatening accidents.
Work on electrical equipment must only be car-
ried out by a qualified electrician.
Work on the appliance
■All settings and work on the appliance must be car-
ried out as specified in these operating instructions.
Further work on the appliance may only be carried
out by authorised contractors.
■Never open the appliance.
■Never change or remove fitted accessories.
In case of fire
Danger
Fire presents a risk of burns and explosion.
■Switch the system OFF.
■Use a tested fire extinguisher, class ABC.
Auxiliary components, spare and wearing parts
!Please note
Components that were not tested with the sys-
tem may cause system damage, or may affect
its functions.
Have all installation or replacement work carried
out by qualified contractors.
Safety instructions
For your safety
5609 704 GB

3
Commissioning and returning into use
Commissioning must be undertaken by the system
installer or a qualified person authorized by the instal-
ler.
Connected components instructions and inverter
"technical description".
Insurance
Viessmann photovoltaic modules are tested to
DIN EN 61215 and DIN EN 61730 for impact resist-
ance, including, amongst others, against hailstones.
Nevertheless, we would recommend including the pho-
tovoltaic modules in the building insurance as protec-
tion against extreme weather conditions. Damage due
to these conditions is excluded from our warranty.
Operation
Should your photovoltaic system fail to operate cor-
rectly, please notify your local contractor. Never carry
out any work on the system yourself.
In connection with any work on the roof by roofing con-
tractors, flue gas inspectors or aerial installers, please
inform such contractors of the following:
■Never step on photovoltaic modules or place any
objects onto them.
■Never touch or mechanically stress photovoltaic
modules, mounting frames, connecting cables and
plug-in connections.
■Never undo plug-in connections.
■Never cut through connecting cables.
Care, inspection and maintenance
Please note the service instructions supplied in
connection with cleaning and maintenance work.
■Contamination on the front glass panes of the photo-
voltaic modules reduces the light ingress and conse-
quently the output. In the case of severe contamina-
tion we recommend having the photovoltaic modules
cleaned by a qualified specialist.
■Have the photovoltaic system maintained regularly in
order to safeguard trouble-free, energy efficient and
environmentally responsible operation. For this, it is
recommended that you take out an inspection and
maintenance contract with your local contractor.
Operating information
Operating information
5609 704 GB

4
Faults
Instructions on connected components and
inverter "technical description".
Contact your local contractor if you are unable to trou-
bleshoot the system.
Disposal of packaging
Your heating contractor/electrician will dispose of the
packaging from your Viessmann product.
DE: Packaging waste is channelled for recycling to a
certified disposal contractor in line with statutory
regulations.
AT: Packaging waste is channelled for recycling to a
certified disposal contractor in line with statutory
regulations. Use the ARA statutory disposal sys-
tem (Altstoff Recycling Austria AG, licence num-
ber 5766).
Final decommissioning and disposal
Viessmann products can be recycled. Components
and operating fluids do not belong in ordinary domestic
waste.
Please contact your heating contractor/electrician in
connection with the correct disposal of your old sys-
tem.
For example, PV modules can be disposed of free of
charge via the municipal collection point for electrical/
electronic goods.
Your contact
Contact your local contractor if you have any questions regarding the maintenance and repair of your system.
You may, for example, find local contractors on the internet under www.viessmann.com.
Viessmann Limited
Hortonwood 30, Telford
Shropshire, TF1 7YP, GB
Telephone: [phone]
Fax: [phone]
E-mail: [email protected]
Viessmann Werke GmbH & Co. KG
D-35107 Allendorf
Telephone: [phone]
Fax: [phone]
www.viessmann.com
5609 704 GB Subject to technical modifications.
Faults and disposal