Viking security safe Vs-51ks User manual

USER MANUAL

VikingSecuritySaf

MODELS:

VS-51KS LCD ELECTRONIC SAFE FOR STORING KEYS

VS-100KS LCD ELECTRONIC SAFE FOR STORING KEYS

VS-144KS LCD ELECTRONIC SAFE FOR STORING KEYS

VS-40DS MEDIUM LCD ELECTRONIC DEPOSITORY SAFE

VS-48DS LARGE LCD ELECTRONIC DEPOSITORY SAFE

www.vikingsecuritysafe.com | [email protected] page 1/5

VIKING SECURITY SAFE

www.vikingsecuritysafe.com | [email protected]

IMPORTANT

Do not lock the override keys inside the safe.

The safe can only be programmed when the safe is unlocked.

For security reasons the key cannot be removed, and the electronic lock is deactivated when the safe

is unlocked using the override key. To remove the key, you must lock the safe using the key.

When new batteries are installed your PIN codes are saved. However, the sound and display function

are reset to default settings, PIN codes digits are visible, and sound is on.

Your safe comes with 2 sets of default PIN codes. Change BOTH.

Test ALL functions of the safe BEFORE you mount it to a permanent location.

SAFE OVERVIEW

page 2/5

ALCD Display

BKeypad

CConcealed override keyhole

DLED interior lights

EBattery compartment

FLocking bolts

IMPORTANT

BEFORE TESTING YOUR NEW PIN CODE, REMOVE THE KEY BY TURNING IT COUNTER-

CLOCKWISE. OTHERWISE, "ERROR" WILL SHOW ON THE SCREEN WHEN INPUTTING

YOUR PIN CODE.

VIKING

BEGIN WITH:

Unlock the safe with high security override

key. Slide the Logo Plate, insert the key and

rotate clockwise.

Install 4 AA batteries in correct direction

following illustration at the back of the battery

compartment.

Note: When batteries need changing will

show on display when press ‘ ’.

IMPORTANT

THE SAFE CAN BE PROGRAMMED

ONLY WHEN THE SAFE IS UNLOCKED.

CHANGE BOTH DEFAULT PIN CODES.

HOW TO CHANGE DEFAULT

PIN CODES?

To change Employee PIN Code 8888:

With safe in UNLOCKED position, press ' '

and 3 simultaneously. ‘SET COdE’ will show

on the screen when.

Punch in your new 3 to 8 digits Unique PIN

code and press #.

"rEPEAT" will show on the screen.

Punch in your Unique PIN code and # for

second time.

‘good’ will show on screen to confirm new

code is changed successfully. If you hear

three short beeps and ‘Error’ show on

screen, repeat step from 3.1. to 3.4.

Note: when you’re punching in the PIN code, you

can delete a digit which input by mistake by pressing

button ' '.

3.1.

3.2.

3.3.

3.4.

To change Master PIN Code 0000:

With safe in UNLOCKED position, press ' '

and 4 simultaneously. ‘OLd’ will show on the

screen when.

Punch in default PIN code 0000 and press #.

"NEU" will show on the screen and you’ll

hear 2 beeps.

Punch in your new 3 to 8 digits Unique PIN

code and press #.

"AgAIN" will show on the screen.

Punch in your Unique PIN code and # for

second time.

‘good’ will show on screen to confirm new

code is changed successfully.

4.1.

4.2.

4.3.

4.4.

4.5.

4.6.

www.vikingsecuritysafe.com | [email protected] page 3/5

3.5.

4.7.

HOW TO LOCK THE

SAFE?

HOW TO UNLOCK THE

SAFE?

Press ' ', punch in your unique PIN and #.

“ENT CodE” will display on the screen once

you press ' '.

Note: If wrong PIN code is entered 3 times in a row,

warning beep will sound, functions of the safe will be

disabled and "Error" will show on the screen for 1

minute.

“OPEN” will display on the screen if the code is

correct and the door will open.

5.1.

5.2.

5.3.

Close the door, press ' ' and then #.

“CLOSE” will display on the screen.

6.1.

6.2. *

HOW TO SHOW/HIDE

PIN CODE DIGITS ON

THE SCREEN?

Press and hold ' ' and 1 simultaneously to

show or hide digits.

“dP----" will show on the screen when PIN

digits are hidden.

“dP COdE” will show on the screen when PIN

digits are visible.

7.1.

7.2.

7.3.

HOW TO TURN

SOUNDS ON/OFF?

Press and hold ' ' and 2 simultaneously to

turn sound ON or OFF.

“SILENT” will show on the screen when sound

is turned OFF.

“bUZZEr” will show on the screen when sound

is turned ON.

8.1.

8.2.

8.3.

HOW TO ACTIVATE

LED LIGHT?

Press #. ‘LIgHT ON’ will show on the screen.

9.1.

www.vikingsecuritysafe.com | [email protected] page 4/5

VikingSecuritySaf

HOW TO MOUNT THE SAFE?

There are pre-drill holes in the bottom and on

the back of each safe.

Use the provided mounting bolts to fix the safe

securely to a solid concrete floor or wall. Refer

to diagram.

IMPORTANT

IT IS RECOMMENDED TO BOLT

DOWN THE SAFE TO A PERMANENT

LOCATION.

10.1.

10.2.

www.vikingsecuritysafe.com | [email protected] page 5/5

VIKING SECURITY SAFE

This manual suits for next models

Other Viking Security Safe Safe manuals

Viking Security Safe

Viking Security Safe SX line VS-12SX Quick start guide

Viking Security Safe

Viking Security Safe VS-37PZ User manual

Viking Security Safe

Viking Security Safe VS-12BL User manual

Viking Security Safe

Viking Security Safe VS-12BL User manual

Popular Safe manuals by other brands

Euromate

Euromate 406210 Original instructions

SPORTS AFIELD

SPORTS AFIELD PRESERVE SA72-60WD instruction manual

Squire

Squire Stronghold Keysafe Fitting instructions

Phoenix

Phoenix FS0352C Instructions & Guarantee Registration

Hornady

Hornady SnapSafe Trunk Safe II owner's manual

Phoenix

Phoenix KS0030E Series operating instructions

Vaultek

Vaultek 10 Series Quick setup

Arregui

Arregui CLASS operating instructions

Technomax

Technomax Trony Series Instruction handbook

SPORTS AFIELD

SPORTS AFIELD INSTINCT BIOMETRIC Series instruction manual

SPORTS AFIELD

SPORTS AFIELD SA-HD5-BIO instruction manual

Olymp

Olymp GOsafe 110 operating instructions

Phoenix

Phoenix SS0100E Operating Instructions & Guarantee Registration

Ankaro

Ankaro ANK EZ I quick start guide

Honeywell

Honeywell 2077D - 1.21 Cubic Foot Anti-Theft Safe user guide

Beaumont

Beaumont SMART KEYBOX user guide

Phoenix

Phoenix FS1270E Series operating instructions

Shure

Shure T-Wall Series Assembly instructions

Viking Security Safe VS-51KS User manual

Popular Safe manuals by other brands