Viking Designer DGRT300-4B User manual

PLANNING AND DESIGN GUIDE
V I K I N G R A N G E . C O M • 1 - - V I K I N G 1
R E L E A S E D 0 5 / 1 4 / 0
© 2 0 0 7 V R C — I N F O R M AT I O N S U B J E C T T O C H A N G E
Both models include
• Brass sealed burners with
porcelain/cast iron caps and automatic
ignition/re-ignition
• One-piece, extremely durable steel
top
• Separate spill collection areas; each
area holds up to 1-1⁄2 quarts of liquid
spillover
• Grate design provides continuous
surface for easy movement of pots
• Durable knobs with childproof,
push-to-turn safety feature
30”W. 4B model includes
• Four burners
o Left front—16,000 BTU high/3,400
BTU low
o Left rear—12,000 BTU high/1,700
BTU low
o Right rear— ,000 BTU high/1,200
BTU low
o Right front—6,000 BTU high/950
BTU low
36”W. 5B model includes
• Five burners
o Left front—12,000 BTU high/1,700
BTU low
o Left rear—10,000 BTU high/1,500
BTU low
o Center—16,000 BTU high/3,400
BTU low
o Right rear— ,000 BTU high/1,200
BTU low
o Right front—6,000 BTU high/950
BTU low
FINISH DETAILS FOR BOTH MODELS**
• Stainless Steel (SS), Black (BK), White
(WH), Graphite Gray (GG), Stone Gray
(SG), and Biscuit (BT).
o Finish designates top. Black porcelain
grates, porcelain burner caps, and
knob grips.
• White (WH)
o Gray porcelain grates, burner caps,
and knob grips.
• Brass Trim Option (BR)—knobs. Brass
components have a durable protective
coating for maintenance-free normal
use.
Standard Features & Accessories
Model Options
COOKING
Designer Built-In Gas 30”/36”W.
Sealed Burner Rangetop
*Shown throu hout with 6”H. back uard. See Installation Notes & Accessories for details.
ORDERING INSTRUCTIONS
First specify model number, and then color code (DGRT300-4BSS). If ordering optional brass trim, specify code at end (DGRT300-4BSSBR).
If ordering optional LP conversion, specify code at end (DGRT300-4BSSLP).
DGRT300-4B*
30”W. Four-Burner
Ran etop
DGRT360-5B*
36”W. Five-Burner
Ran etop

DGRT300-4B
30”W. Four-Burner
Ran etop
DGRT360-5B
36”W. Five-Burner
Ran etop
COOKING
Designer Built-In Gas 30”/36”W.
Sealed Burner Rangetop
PLANNING AND DESIGN GUIDE
V I K I N G R A N G E . C O M • 1 - - V I K I N G 1
R E L E A S E D 0 5 / 1 4 / 0
© 2 0 0 7 V R C — I N F O R M AT I O N S U B J E C T T O C H A N G E

Please see
Installation Notes &
Accessories
for important
installation
information,
including
backguard, high-
shelf, and Island
trim.
24-1/2”
(62.2 cm)
26-1/8”
(66.4 cm)
27-5/8”
(70.5 cm)
29-7/8”
(75.9cm)
12-1/8”
(30.8 cm)
6-1/8”
(15.6cm)
(to cookingsurface)
24-1/2”
(62.2 cm)
26-1/8”
(66.4 cm)
27-5/8”
(70.5 cm)
35-7/8”
(91.1cm)
12-1/8”
(30.8 cm)
6-1/8”
(15.6cm)
(tocookingsurface)
DGRT300-4B DGRT3360-5B
Overall w dth 29-7/8” (75.9 cm) 35-7/8” (91.1 cm) max.
Overall he ght (from bottom)
To cook ng surface 6-1/8” (15.6 cm)
To top of sland tr m 6-1/8” (15.6 cm)
To top of 6” backguard 12-1/8” (30.8 cm)
To top of 10” backguard 16-1/8” (41.0 cm)
To top of high shelf 24-1/8” (61.3 cm)
Overall depth (from rear)
To end of s de panel 24-1/2” (62.2 cm)
To end of control panel 26-1/8” (66.4 cm)
To end of knobs 27-5/8” (70.5 cm)
Star-K Kosher
Certification for
use on the Jewish
Sabbath or Jewish
holidays
Dimensions & Speci ications
PRODUCT DIMENSIONS
ALL MODELS
30”W. Models 36”W. Models

PLANNING AND DESIGN GUIDE
V I K I N G R A N G E . C O M • 1 - - V I K I N G 1
R E L E A S E D 0 5 / 1 4 / 0
© 2 0 0 7 V R C — I N F O R M AT I O N S U B J E C T T O C H A N G E
COOKING
Designer Built-In Gas 30”/36”W.
Sealed Burner Rangetop
36”
(91.4 cm)
A
30” 30” (76.2 cm)
36“ 36” (91.4 cm)
A
42”
(106.7cm) min.
18”min.
(45.7cm)
6”min.
(15.2cm)
13”max.
(33.0cm)
5-3/4”
(14.6 cm)
Minimum clearances from adjacent
combustible construction
• Cooking surface and below, i.e., 36”
(91.4 cm) and below
o Sides—0”
o Rear
•0” with backguard or high-shelf
•0” with island trim and non-
combustible rear wall
•6” (15.2 cm) with island trim and
combustible rear wall.
o Top grate support—36” (91.4 cm)
Important: The top grate support
must be 3/ ” (0.95 cm) above the
adjacent base cabinet countertop.
• Above cooking surface, i.e., above
36” (91.4 cm)
o Sides—6” (15.2 cm)
o Within 6”(15.2 cm) side clearance,
wall cabinets no deeper than
13” (33.0 cm) must be minimum
1 ” (45.7 cm) above cooking surface.
• Wall cabinets directly above product
must be minimum 42” (106.7 cm)
above cooking surface.
* This minimum height requirement does
not apply if a rangehood is installed
over the cooking surface.
Do not install two or more units
side-by-side.
Dimensions & Speci ications
CLEARANCE DIMENSIONS

DGRT300-4B
30”W. Four-Burner
Ran etop
DGRT360-5B
36”W. Five-Burner
Ran etop
24-1/2”
(62.2cm) min.
26-1/8”
(66.4cm) max.
3/4”
(1.9cm)min.
2-1/4”
(5.7cm)
3”
(7.6cm)
COOKING
Designer Built-In Gas 30”/36”W.
Sealed Burner Rangetop
PLANNING AND DESIGN GUIDE
V I K I N G R A N G E . C O M • 1 - - V I K I N G 1
R E L E A S E D 0 5 / 1 4 / 0
© 2 0 0 7 V R C — I N F O R M AT I O N S U B J E C T T O C H A N G E
UTILITY
REQUIREMENTS
GAS
o Shipped natural
gas or
LP/propane; field
convertible with
conversion kit
(sold seperately)
o Accepts standard
residential 1/2”
(1.3 cm) ID gas
service line
o Gas manifold
pressure
o Natural gas 5.0”
W.C.P.
o LP/Propane
10.0" W.C.P.
ELECTRICAL
• Four-foot
(121.9 cm) cord
included with
rangetop
• 3-wire with
ground/3-prong
plug
• 120 V/60 Hz
• Max. amp usage—
o 2.0 amps
PLUMBING
Not applicable
Installation Requirements
ACCESS REQUIREMENTS
DGRT300-4B DGRT360-5B
Cutout w dth 30” (76.2 cm) 36” (91.4 cm)
Cutout he ght 5-3/4” (14.6 cm)**
Cutout depth 24-1/2” (62.2 cm)
Surface burner rat ng
Left front 16,000 BTU Nat. (4.7 kW)/15,500 BTU LP (4.5 kW) 12,000 BTU Nat. (3.5 kW)/11,500 BTU LP (3.4 kW)
Left rear 12,000 BTU Nat. (3.5 kW)/11,500 BTU LP (3.4 kW) 10,000 BTU Nat. (2.5 kW)/9,500 BTU LP (2.4 kW)
Center 16,000 BTU Nat. (4.7 kW)/15,500 BTU LP (4.5 kW)
R ght rear 8,000 BTU Nat. (2.0 kW)/7,500 BTU LP (1.9 kW) 8,000 BTU Nat. (2.0 kW)/7,500 BTU LP (1.9 kW)
R ght front 6,000 BTU Nat. (1.5 kW)/5,500 BTU LP (1.4 kW) 6,000 BTU Nat. (1.5 kW)/5,500 BTU LP (1.4 kW)
**Top of grates should be 3/8” (1.0 cm) above countertop.
*120 VAC/50 Hz within 4 ” (121.9 cm) of right rear of rangetop.
*

6”H. Backguard
• Stainless Steel (SS)
•Coordinates with all finishes
10”H. Backguard
• Stainless Steel (SS)
• Coordinates with all finishes
High-shel
• Stainless Steel (SS)
• Coordinates with all finishes
• Shelf comes attached to a 24”H. backguard
Island Trim
• Stainless Steel (SS)
• Coordinates with all finishes
• For island/peninsula installation
• Can replace backguard if wall is non-combustible
Countertop Side Trim
• Stainless Steel (SS)
• Coordinates with all finishes
• Installs on side of unit; overlaps countertop
• One pair of trim
LP/Propane Conversion Kit
• Allows for field conversion of range from natural gas to LP
Compliance In ormation
WARRANTY INFORMATION*
• One-year full warranty—complete product
• Ten-year limited warranty—surface burners, griddle burners and grill burners
• Ninety-day limited warranty—cosmetic parts such as glass, painted, and decorative items
* For complete warranty see Use & Care Guide. Warranty valid on Viking products shipped within the United States and Canada.
COOKING
Designer Built-In Gas 30”/36”W.
Sealed Burner Rangetop
PLANNING AND DESIGN GUIDE
V I K I N G R A N G E . C O M • 1 - - V I K I N G 1
R E L E A S E D 0 5 / 1 4 / 0
© 2 0 0 7 V R C — I N F O R M AT I O N S U B J E C T T O C H A N G E
 Installation Notes & Accessories
A backguard, high-shelf, or island trim must be used for all installations.
Model Description Approx. ship wt. lbs. (kg)
D30BG6 30”W. backguard 14 (6.3)
D36BG6 36”W. backguard 17 (7.7)
Model Description Approx. ship wt. lbs. (kg)
D36BG10 36”W. backguard 20 (9.0)
Model Description Approx. ship wt. lbs. (kg)
D30HS24 30"W. h gh-shelf 45 (20.3)
D36HS24 36"W. h gh-shelf 50 (22.5)
Model Description Approx. ship wt. lbs. (kg)
D30TII 30”W. sland tr m 10 (4.5)
D36TII 36”W. sland tr m 11 (5.0)
Model Description Approx. ship wt. lbs. (kg)
TE24CST S de tr m 2 (0.9)
Model Description Approx. ship wt. lbs. (kg)
DLPK Natural to LP/propane convers on k t 2 (0.9)