Viking C-2000 Instructions for use

itoring purposes. An auxiliary input is also available for connecting a common garage
door opener/receiver and auxiliary
keyless entry keypads.
The C-2000 allows up to 4 entry phones to call into
your existing residential or business phones or
phone system. Tenants may answer the call, con-
verse with the visitor and activate a contact closure
to control electronic gates or door strikes.
The C-2000 provides “Caller ID,” “Call Waiting ID”
and “Call Waiting” tone when the phone line is in
use. Tenants may gain entry at each gate by enter-
ing a Touch Tone keyless entry code.
Tenants may call out to each entry phone for mon-
Add Door Entry Features to Your
Existing Home or Office Phones
P
Ph ho on ne e. .. .. .7 71 15 5. .3 38 86 6. .8 88 86 61 1
h
ht tt tp p: :/ // /w ww ww w. .v vi ik ki in ng ge el le ec ct tr ro on ni ic cs s. .c co om m
• Connect up to 4 entry phones
• Compatible with:
- E-10, E-15, E-20A and E-30 Handsfree Phones
- K-1500-7 Stainless Steel Panel Phone
- K-1700-3 Handsfree Phone with Keypad
- K-1900-8 Stainless Steel Phone with Keypad
- Any analog phone
• Optional “Privacy Number” allows only
selected visitors to call from an entry phone
• Provides “Caller ID” and “Call Waiting ID”
• Produces “Call Waiting” tones
• Two sets of normally open and normally
closed contacts available for each entry
phone
• Four separate programmable keyless entry
codes plus a master entry code
• Programmable contact activation time
• Auxiliary input to activate timed auxiliary
contacts
• Realistic call progress tones
Power: 120VAC / 13.8VAC 1.25A, UL listed adapter provided
Dimensions: 210mm x 159mm x 45mm (8.25" x 6.25" x 1.75")
Shipping weight: 1.5kg (3.2 lbs.)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95%
non-condensing humidity
Relay Contacts: 5A @ 30VDC/250VAC
Ring Output: 8 REN, capable of ringing (8) 1 REN phones
Talk Battery: 40V DC
Connections: (46) cage clamp screw terminals
P
Pr ra ac ct ti ic ce e
T
TE
EL LE EC CO OM MS
SO
OL LU UT TI IO ON NS SF FO OR RT TH HE E2
21 1S
ST TC
CE
EN NT TU UR RY Y
TECHNICAL
TECHNICAL
F
Fe ea at tu ur re es s
S
Sp pe ec ci if fi ic ca at ti io on ns s
• Add one to four entry phones to your stan-
dard home or office phones to provide:
- Door communication
- Door entry
- Gate entry
- Keyless entry
• Provide commercial or residential security via
two-way handsfree communication at the
door and gate
A
Ap pp pl li ic ca at ti io on ns s
i
in nf fo o@ @v vi ik ki in ng ge el le ec ct tr ro on ni ic cs s. .c co om m
C-2000
C-2000
Advanced Door
Entry Controller
August 27, 2001

I
In ns st ta al ll la at ti io on n
P
Pr ro og gr ra am mm mi in ng g
A. Programming Features
* Privacy Number (factory disabled) ....................................................................
* Entry phone 1 entry code (factory disabled) .......................................................
* Entry phone 2 entry code (factory disabled) .......................................................
* Entry phone 3 entry code (factory disabled) .......................................................
* Entry phone 4 entry code (factory disabled) .......................................................
* Master entry code (factory disabled) ...................................................................
Relay 1 activation time (.5 - 99 seconds, factory set to .5 seconds) ..................
Relay 2 activation time (.5 - 99 seconds, factory set to .5 seconds) ..................
Relay 3 activation time (.5 - 99 seconds, factory set to .5 seconds) ..................
Relay 4 activation time (.5 - 99 seconds, factory set to .5 seconds) ..................
Auxiliary contacts timer (.5 - 99 seconds, factory set to .5 seconds) ..................
Maximum ring count (1 - 99 rings, factory set to 5 rings) ...................................
Security code (factory set 845464) ......................................................................
Enable Caller ID (factory setting) ........................................................................
Disable Caller ID ..................................................................................................
Entry phone calls give double ring ......................................................................
Entry phone calls give standard ring cadence (factory setting) ............................
To access C.O. dial tone, dial “9” (factory setting) ................................................
For use with private dial tone (phones will instantly have dial tone) ...................
Set all programming to factory settings ...............................................................
* May not contain a “
4 ” or a “#”.
(0-6 digits)
(0-6 digits)
(0-6 digits)
(0-6 digits)
(0-6 digits)
(0-6 digits)
(2 digits)
(2 digits)
(2 digits)
(2 digits)
(2 digits)
(2 digits)
(6 digits)*
41
42
43
44
45
46
###
#00
#11
#12
#13
#14
#50
#21
#22
#23
#24
#30
#40
#47
Memory
Location
Enter Digits - then -
+
+
+
+
+
+
+
+
+
+
+
+
+
B. Security Code
A six digit number must be used to access the programming mode. The security code has been factory set to 845464
(V-I-K-I-N-G). It is recommended that you change the security code to a personal 6 digit number as follows:
1. Access programming as shown in section C.
2. Enter your new security code followed by “#47”.
Note: The security code must be six digits in length and can NOT contain a 4 or #.
C. Accessing Programming
Take a house phone off-hook and enter “4#” followed by the six digit security code (see section B). A double beep will
indicate that programming has been entered.
PWR
LED
ENTRY
PHONE 1
C.O. IN PHONES
1 2 3 4 ENTRY
PHONE 2 ENTRY PHONE 3 ENTRY PHONE 4
AUX
INPUTS
CONTACT
CLOSURE LOGIC
VIKING© MODEL C-2000
VIKING
ELECTRONICS
HUDSON, WI 54016
ADVANCED DOOR ENTRY CONTROLLER
123
C.O. LINE INPUT
HOUSE PHONES
POWER
13.8VAC
DOOR STRIKE 1 DOOR STRIKE 2 DOOR STRIKE 3 DOOR STRIKE 4 AUX CONTACTS
4Keyed or Keyless
Momentary Closure
12
34
56
78
90
Enter
C.O. Line or
Analog
PABX/KSU
Station
To House
Phone(s)
or
13.8V AC
Adapter
Included
120V AC
Entry Phone 1
(K-1700-3 shown,
not included)
Entry Phone 2
(E-20A shown,
not included)
Entry Phone 3
(E-30 shown,
not included)
To Entry Phone 4
Call
VIKING©Call
VIKING©
Press "Call" button
then enter tenant code
Power typically not required
for gate controllers.
Doorstrike/Magnetic Lock
5A@30VDC/250VAC
maximum

A contact closure output is available
for each entry phone. An auxiliary
output is also available.
Note: The C-2000 is not recommended to
be installed in combination with the TR-1 Toll
Restrictor. Contact your local C.O. for toll
restriction requirements.
Door Strikes/Magnetic Locks: For door
strike/magnetic lock information, contact
your distributor or JLM Wholesale at (800)
522-2940.
Many different Viking
doorphones may be
used in combination with
the C-2000. For more
information on each indi-
vidual phone, see
Operation section G.
Keyed or Keyless Momentary Closures:
For keyed or keyless lock information, con-
tact your distributor or
International Electronics
at [phone].

When a visitor presses the call button (comes off hook), the entry phone will ring
down to the house phones and “Caller ID” information is sent. If a house phone is on
a C.O. call, call waiting tones and “Call Waiting ID” information is sent. A Touch Tone
“#” from the house phone will put the C.O. call on hold and the C-2000 will connect
to the entry phone and beep its location number. Enter Touch Tones “44” to momen-
tarily activate that relay and return to the C.O. call or enter “#” to just return to the
C.O. call. A 1/2 second buzz will indicate when a relay has been activated.
D. Privacy Number
The “Privacy Number” is factory disabled so an entry phone off-hook will automatically ring the house phones. If a
“Privacy Number” is programmed, the visitor must Touch Tone dial the number to be able to call into the house. The
“Privacy Number” may be from 1 to 6 digits and is stored in location “#00”. To disable the “Privacy Number,” clear the
number’s memory location by entering “#00” without any previous digits.
E. Entry Codes
Each entry phone may have its own entry code for Touch Tone keyless entry. The entry codes may be from 1 to 6 dig-
its and are stored in locations “#11” through “#14” for entry phones 1 through 4 respectively. A master entry code can
be used at any entry phone and is stored in location “#50”. To clear any entry codes, simply enter just the location num-
ber (ie. “#11”) without any previous digits.
F. Relay Timers
A double pole double throw relay is available for each entry phone, and each may
be programmed with its own activation time, programmed in seconds. Each time
must be 2 digits (Example: 00 = 1/2 sec.) and is stored in locations “#21” through
“#24” for relays 1 through 4 respectively. The auxiliary contacts relay activation
time is stored in location “#30”. All activation times are factory set to 00 (1/2 sec.)
Note: A short buzz will indicate when a relay has been activated.
G. Caller ID
The C-2000 is factory set to send “Caller ID” and “Call Waiting ID” information from the entry phones. If “Caller ID” is
not required, enter “42” while in programming to disable the C-2000 from sending Caller ID data to the house phones.
Enter “41” to enable Caller ID data.
H. Ring Cadence
Entry phone calls are factory set to ring the house phones in a standard ring cadence (2 seconds on/4 seconds off), “4
4”. The C-2000 can be programmed to give a double ring for entry phone calls (.7 seconds on/.3 seconds off/.7 sec-
onds on/4 seconds off), enter “43” when in programming.
I. Dial Tone
1. C.O. Dial Tone (Factory Default)
To program the C-2000 for C.O. dial tone, enter “45” while programming. To gain access to C.O. dial tone, dial a
Touch Tone “9”.
2. Private Dial Tone
To program the C-2000 for private dial tone, enter “46” while programming. House phones will instantly have dial
tone on an off-hook.
J. Maximum Ring Count
The number of times an entry phone call will ring the house phones can be limited in programming. The programma-
ble maximum ring count must be 2 digits and is stored in location “#40”. The maximum ring count is programmable
from 1 - 99 and factory set to (05) 5 rings.
O
Op pe er ra at ti io on n
A. Visitors
Relays
1
2
3
4
Entry
Phones
1
2
3
4
Memory
Position
#21
#22
#23
#24
Entry
Phone
1
2
3
4
Caller ID and
Call Waiting ID
“Entry Phone 1”
“Entry Phone 2”
“Entry Phone 3”
“Entry Phone 4”
If you require the door strike to remain on continuously (ie: a truck delivery), enter Touch Tones “41” to continuously
activate that relay and return to the C.O. call. A long buzz will indicate the door strike relay is latched on. When the
visitor calls in again (ie: they are finished unloading the truck), enter Touch Tones “40” to deactivate the relay. A short
buzz will indicate the door strike relay is off.
B. Monitoring
Tenants may dial out to an entry phone that supports auto-answering capability by dialing “#1”, “#2”, “#3” or “#4” to call
entry phones 1-4 respectively. All recent Viking Handsfree Phones are equipped with an Auto-Answer feature.

Latch
Relay
#141
#241
#341
#441
Un-Latch
Relay
#140
#240
#340
#440
Activate
Momentarily
#144
#244
#344
#444
Entry
Relay
1
2
3
4
Model
E-10
E-15
E-20A
E-30
K-1700-3
K-15007
(left)
K-1900-8
(right)
C. Gate/Door Release
Tenants may activate the relay without calling out to the entry
phone. Refer to the chart at the right for dialing strings. When
a tenant momentarily activates a relay, it will activate for the
amount of time specified in Programming, section F.
D. Privacy Number
If a privacy number has been programmed, an off hook entry phone is given 4 seconds of dial tone to allow the visitor
to enter the Touch Tone access code. The correct number will ring the house phones, an incorrect number will be dis-
connected. If a privacy number is not programmed, then an off-hook entry phone will immediately ring the house
phones. Note: The “Privacy Number” may be programmed with the first 6 digits of the actual phone number. Visitors
may dial the tenant’s actual 7-digit phone number as if they are making an actual C.O. call.
E. Entry Codes
Touch Tone entry codes may be used by the tenants to provide keyless entry. Each entry phone may have its own
entry code. There is also a master entry code which is usable at all four entry locations. If an entry code has been
programmed, an off-hook entry phone is given 4 seconds of dial tone before ringing the house phone. During this time
a Touch Tone “#” + the “entry code” may be entered. A correct entry code will provide a timed relay activation for that
entry phone location. Note: A short buzz indicates when the relay has been activated.
F. Auxiliary Inputs/Contacts
A momentary contact closure on the “Aux Contacts Input” or a momentary logic level 1 (5V DC) on the “Aux Logic Input”
will produce a timed “Aux Contacts” activation. The auxiliary input contacts may be used to provide an additional relay
or may be used to add doorstrike entry to an entry phone that does not have a Touch Tone keypad. The auxiliary input
contacts may also be used for timed operation of other devices such as yard lights, etc. and can be triggered by the
second set of door entry contacts.
G. Optional Equipment
The C-2000 is compatible with all
of the following Viking phones, as
well as any standard analog
phone.
All flush mount models shown
right may be surface mounted
using an optional back box. For
more information, retrieve Fax
Back Document 424.
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates and/or
subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued to incorporate
such changes.
Fax Back Doc 156 ZF301220 Rev BPrinted in the U.S.A.
P
Pr ro od du uc ct tS Su up pp po or rt tL Li in ne e. .. .. .7 71 15 5. .3 38 86 6. .8 86 66 66 6F Fa ax xB Ba ac ck kL Li in ne e. .. .. .7 71 15 5. .3 38 86 6. .4 43 34 45 5
1. Auto-Answer
If auto-answer is required for monitoring, use Viking models E-10, E-20A, E-30 or K-1700-3 as entry phones.
2. Keyless Entry
If Touch Tone keyless entry is required, use Viking models K-1700-3 or K-1900-8. Alternatively, keyed or keyless
entry may be added to entry phones that do not have Touch Tone keypads by utilizing the AUX INPUT and a third-
party keypad at the entry location.
3. Camera Control
An LDB-1 or LDB-2 loop detect circuit may be added to start and stop camera operation.
210
210
210
212
157
352
362
Flush
Flush
Surface
Flush
Flush
Flush
Flush
Y
Y
Y
Y
Y
N
N
N
N
N
N
Y
N
Y
Y
N
Y
Y
Y*
N
N
Aluminum
Aluminum
Plastic
Stainless Steel
Stainless Steel
Stainless Steel
Stainless Steel
* Requires K-1700-3 (RD). See serial label to verify.
Mounting
Handsfree
Entry Keypad
Auto-Answer
Fax Back #
Material