Rosslare DR-B9000 User manual

DR-B9000
USB Fingerprint Enrollment Station
User Manual
1
1. Introduction
The DR-B9000 is a USB 2.0 fingerprint enrollment scanner to be used with
the Rosslare 9000 series fingerprint readers. The enrollment scanner can be
set up using the AxTraxNG Client software or with the RosslareBio 9000
standalone management software, which allows third-party controller
support.
This device features a modern design with a glass scanning surface, making
it robust and long lasting.
Figure 1: DR-B9000
2. Operation
The DR-B9000 appears as a protected USB drive device when plugged in
to a PC.
Before you can use the reader, you must download the proper driver.
The driver supports the following operating systems:
Windows 10 (32-Bit and 64-Bit)
Windows 8 (32-Bit and 64-Bit)
Windows 7 (32-Bit and 64-Bit)
If you wish to use the AxTraxNG software to enroll fingerprints, please
refer to the relevant appendix in the AxTraxNG™ Software Installation and
User Manual.
If you wish to use the RosslareBio 9000 standalone management software
to enroll fingerprints, please refer to the RosslareBio 9000 Software
Manual.
3. Technical Specifications
Power
USB bus
Current Consumption (Normal)
80 mA
Current Consumption (Standby)
< 5 mA
Resolution
500 DPI
Light Source
White LED
Sensor Size
14.8 x 17.9 mm
Casing Size (W x H x D)
68*68*81 (with Stand)
30.48.5*70 (w/o Stand)
Weight
210 g
Light Source
White LED

2
0706-0960686+00
Declaration of Conformity
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received, including
interference that may cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Limited Warranty
The full ROSSLARE Limited Warranty Statement is available in the Quick
Links section on the ROSSLARE website at www.rosslaresecurity.com.
Rosslare considers any use of this product as agreement to the Warranty
Terms even if you do not review them.
Contact Information
United States and Canada
Rosslare Security Products, Inc.
Southlake, TX, USA
Toll Free: [phone]
Local: [phone]
Fax: [phone]
[e-mail]
Europe
Rosslare Israel Ltd.
22 Ha'Melacha St., P.O.B. 11407
Rosh HaAyin, Israel
Tel: [phone]
Fax: [phone]
[e-mail]
Latin America
Rosslare Latin America
Buenos Aires, Argentina
[e-mail]
China
Rosslare Electronics (Shenzhen) Ltd.
Shenzhen, China
Tel: [phone]
Fax: [phone]
[e-mail]
Asia Pacific, Middle East, Africa
Rosslare Enterprises Ltd.
Kowloon Bay, Hong Kong
Tel: [phone]
Fax: [phone]
[e-mail]
India
Rosslare Electronics India Pvt Ltd.
Tel/Fax: [phone]
Mobile: [phone]
[e-mail]
CERT
ISO 9001
ISO 14001