Viking K-1500-5KB Instructions for use

• Converts standard phones to Hot-Line phones
• Stores up to an 18 digit speed dial number
• Provides Touch Tone or 10/20pps pulse dialing
• Programmable four second pauses
• Selectable fraudulent outbound call blocking
• Telephone line powered
• Can be operated from a dry contact closure
• Eliminates dedicated line charges
• Operates on any standard C.O., PABX or
Centrex lines
• Keypad for easy programming
VIKING©
Technical Practice
Telecommunication Peripheral Products K-1500-5KB
Hot-Line Dialer
October 28, 1997
Sales...[phone]
Made in the U.S.A.
Features Applications
• Replaces leased ring down circuits
• Security and emergency phones
• Elevator phones
• Hotel/motel, airline or rental car reservations
• Automatic long distance (alternate carrier)
prefix dialing
• Apartment security
• Catalog sales
• Money machines
• Emergency alarm dialing
Specifications
Power: Telephone line powered (20 VDC/20mA minimum)
Dimensions: 152mm x 83mm x 45mm (6” x 3.25” x 1.75”)
Shipping Weight: .57 Kg (1.25 lbs)
Environmental: 0°C to 32°C (32°F to 90°F) with 5% to 95%
non-condensing humidity
Connections: Standard RJ-11 modular jacks
Battery Back-Up: One year, 9 volt battery provided
DTMF Dialing Speed: -3dBm, 100msec DTMF tones with
120msec breaks between tones
Pulse Dialing Speed: Switch selectable 10 or 20pps
The K-1500-5KB eliminates the need to pay the
premium of leased or dedicated phone lines by
converting any analog phone into a single number
Hot-Line phone. The dialer will operate on any
analog PABX or standard Central Office line with
any conventional analog phone.
The K-1500-5KB is designed to be compatible with
Viking’s E-10, E-15, E-20, K-1500-E and K-1500-
EHF emergency, elevator or courtesy phones. The
K-1500-5KB is line powered and comes complete
with an internal battery to retain programming for up
to one year. The K-1500-5KB also allows incoming
calls and can block fraudulent outgoing calls.
Touch Tone or Pulse Hot-Line Dialer
http://www.VikingElectronics.com
[email protected]

Programming
Installation
Connect the K-1500-5KB as shown below. Note: E-10, E-15 and E-20 require a minimum 48V talk battery.
A. Programming the Speed Dial Number
1. Install as shown above, then push and HOLD the ✱button on the K-1500-5KB key pad.
2. While holding the star button:
a. Take the phone connected to the K-1500-5KB off-hook.
b. Using the key pad on the K-1500-5KB, enter the number you wish the K-1500-5KB to dial. Use digits 0- 9
and a #for a four second pause.
3. Hang up the telephone connected to the K-1500-5KB.
4. Release the ✱ key.
Note: The K-1500-5KB must be specially programmed to dial a Touch Tone ✱or #. If your application requires
dialing a ✱ or a #, retrieve Fax Back Document 306 or contact Viking technical support at [phone]
VIKING
Model
000002376587 1 2 3 4 ON
OFF
Sw Position Function
1
1
2
2
3
3
4
4
ON
OFF
ON
OFF
ON
OFF
ON
OFF
Tone dialing
Pulse dialing
20 pps dialing
10 pps dialing
Restricts Touch Tone dialing
Allows Touch Tone dialing
Touch Tone dialing will stop the K-1500-5KB
Touch Tone dialing will NOT stop K-1500-5KB
B. Blocking Fraudulent Calls
This feature eliminates Touch Tone phone users from making fraudulent outbound calls. The K-1500-5KB will
momentarily hang up upon detection of Touch Tones from the phone. To activate this feature, place dip switch 3 in
the ON position and dip switch 4 in the OFF position.
Note: Certain voices may sound like Touch Tones and may create mid conversation disconnection with this
feature enabled. If this symptom is present, disable this feature or contact Viking Technical Support for other
methods of handling toll abuse.
Standard
Phone
E-10 or
E-15
E-20
C.O. Line or analog
PABX/KSU
extension

Typical Applications
D. Programming Examples
1. Storing 1-715-386-8861 as the programmed number.
a. Follow steps 1- 2in section A.
b. Enter : 1 715 386 8861.
c. Hang up the phone.
d. Release the ✱key.
2. Storing a 9, a four second pause then 1-715-386-8861.
a. Follow steps 1-2in section A.
b. Enter: 9 # 1 715 386 8861.
c. Hang up the phone.
d. Release the ✱key.
3. Storing 911 as the programmed number so that, if the phone goes off-hook and no Touch Tones are entered for
twelve seconds, the K-1500-5KB will dial 911.
a. Follow steps 1- 2in section A.
b. Enter: # # # 911.
c. Hang up the phone.
d. Release the ✱key.
C. Dialing an Emergency Number After a Specified Time Out
This feature allows Touch Tone phones connected to the K-1500-5KB to be used in a normal fashion. If the phone
comes off-hook and no Touch Tones are detected by the K-1500-5KB for the total number of programmed pauses,
the K-1500-5KB will dial an emergency number. The dialer can be programmed to pause in any four second
increment prior to dialing. Entering a #anywhere in the programmed dialing string will provide a four second
pause.
Note: Each four second pause uses one digit of the 18 digit programming capacity.
A. Operating the K-1500-5KB from a Contact Closure
In certain emergency applications, the K-1500-5KB can be used to alert someone that an alarm has occurred. In
all applications, the contact closure must be maintained (closed) longer than the time required to dial the number
and for the device called to answer.
B. Using the K-1500-5KB to Call a Beeper
In this application, the installer programs the K-1500-5KB to dial the pager access number, then programs enough
four second pauses to allow the paging system to answer followed by an identification code (See Diagram 1
above).
Note: Each four second pause uses one digit of the 18 digit programming capacity.
Note: Dip switch 3 must be OFF and dip switch 4 must be ON for this application.
Red
Green
Contact
Closure
150Ω1/2 Resistor
(Radio Shack # 271-013)
Model K-1500-5KB
C.O. Line or analog
PABX/KSU
extension
Diagram 1

ZF280540 Rev E
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking
Electronics, its affiliates and/or subsidiaries assume no responsibility for errors and/or omissions contained in this information. Revisions
of this document or new editions of it may be issued to incorporate such changes.
Product Support Line...[phone] Fax Back Line...[phone]
Printed in the U.S.A.Fax Back Doc # 305
C. Using the K-1500-5KB in Conjunction with an Announcer to Identify a Calling Location
A Viking model EV-1 can be placed in series with the line connected to the K-1500-5KB (See Figure 2) to add
an automatic voice identification/alarm message. The EV-1 is capable of recording up to a 10 second
message. Example: “Attention, the burglar alarm has been activated at ACME Incorporated. Please contact
the authorities.” The EV-1’s message can be recorded locally or remotely and can be programmed to repeat
every 3 or 8 seconds. Note: When recording the EV-1, do not use the #key to stop the recording. The EV-1
must be allowed to time out.
1. EV-1 Emergency Voice Announcer ( Fax Back Document 135 )
If a longer recording is required, a Viking Model DVA-500 may be used (See Figure 3). The DVA-500 comes
standard with 16 seconds of digital record time and is expandable to 32 seconds, by installing a Viking DRAM-
32 memory expansion kit. When the contact is closed, the DVA-500 seizes the phone line and the K-1500-5KB
dials the preprogrammed number. The DVA-500 then repeats the message until the closure is opened.
2. DVA-500 Digital Announcer ( Fax Back Document 115 )
Red
Green
Contact
Closure
150Ω1/2 Resistor
(Radio Shack # 271-013)
Diagram 3
VIKING©
Digital Announcer
Model DVA-500
REC/MON
VOL
Viking Electronics, Inc. Hudson WI 54016
PLAY REC START
TAPE
LED
Model DVA-500
Yellow
Black
To J3
Model K-1500-5KB C.O. Line or analog
PABX/KSU extension
Red
Green
Contact
Closure
150Ω1/2 Resistor
(Radio Shack # 271-013)
Diagram 2
VOICE
MODULE
REC
LED
VIKING©
TO PHONE LINE IN
MODEL EV-1
Model EV-1
Model K-1500-5KB
C.O. Line or analog
PABX/KSU
extension