Vimar ELVOX Videocitofonia 7539 User manual

Tab
7539
Tab Free hands-free Due Fili Plus video entryphone
User Manual

IT
2
7539 Tab Free

IT
3
7539 Tab Free
Index
• General information.....................................................................................................................................4
• Warnings and advice..........................................................................................................................................................4
• Key functions and status LEDs (Front view) ............................................................................................5
• Keys (Default functions).....................................................................................................................................................5
• Status LEDs .......................................................................................................................................................................6
• Operation......................................................................................................................................................7
• Functions ...........................................................................................................................................................................7
• Answering a call.................................................................................................................................................................8
• Lock release.......................................................................................................................................................................8
• Answering a call from an Indoor Station or Reception switchboard...................................................................................9
• Self-start.............................................................................................................................................................................10
• Calling an Indoor Station (Intercom) ..................................................................................................................................11
• Calling a Reception Switchboard .......................................................................................................................................12
• Landing call........................................................................................................................................................................12
• Alert function ......................................................................................................................................................................13
• Adjustmentsandusercongurations.......................................................................................................14
• Ringtone volume adjustment .............................................................................................................................................14
• Brightness control ..............................................................................................................................................................14
• Contrast adjustment (volume key) .....................................................................................................................................14
• External call voice unit volume adjustment (10 levels with indoor station in a conversation) 14
• Internal call voice unit volume adjustment (10 levels with indoor station in a conversation) 14
• Ringtone mute....................................................................................................................................................................14
• Choice of call melodies ......................................................................................................................................................15
• Congurations .............................................................................................................................................16
• First power-up ....................................................................................................................................................................16
• IDcodeconguration .........................................................................................................................................................17
• SecondaryIDcodeconguration.......................................................................................................................................18
• Keycongurationtomakeintercomcalls ..........................................................................................................................19
• Congurationofakeyforself-startofaspecicoutdoorstation .......................................................................................20
• Congurationofakeyforlockreleaseofaspecicoutdoorstation..................................................................................21
• Procedure for restoring default data for each individual key..............................................................................................22
• Restoringthedefaultdata(Totaldeletionofcongurations)..............................................................................................23
• Advancedcongurations............................................................................................................................24
• AlertfunctioncongurationviaSaveProg ..........................................................................................................................24
• AdvancedcongurationwithSaveProg software...............................................................................................................25

IT
4
7539 Tab Free
Door release of
the calling Outdoor
Station
Outdoor Station
Self-start
Call from Outdoor
Station
Intercoms
Call to/from
Reception
switchboard
Auxiliary
services
activation
Audiofrequencyfunctionforhearingaids-Teleloop
Maintenance
Clean using a soft cloth.
Do not pour water onto the appliance and do not use any type of chemical product.
Warningsfortheuser
Do not open or tamper with the appliance.
In the event of faults, contact specialized personnel.
For installation, refer to the instruction sheet in the package.
General information
Warnings and advice
The video entryphone can be used by people wearing hearing aids.
For correct functioning of the hearing aid, please refer to its instruction manual.
Any metal objects or electronic equipment in the vicinity may affect the quality of the sound received by the hearing aid.
"Tab Free" hands-free video entryphone with 3.5” colour display for Due Fili Plus systems. It has a capacitive keyboard with keys
for answering calls, door release, self-start, auxiliary services/intercom calls, adjustments to volume, brightness and contrast. It is
possible to differentiate the call ringtones. The visual signals are for “door/gate open,” “missed calls,” "user away", "ringtone mute”
and “alert”.
Can be used by hearing aid wearers (Teleloop).

IT
5
7539 Tab Free
Key functions and status LEDs (Front view)
Keys (Default functions)
KEY DESCRIPTION
ASelf-start: it activates the main outdoor station (ID 1)
B
Ringtonemute: disables/enables the ringtone.
Ringtone mute: disables the ringtone during an incoming call. The ringtone is simultaneously also disabled
for subsequent calls
CLock release: It activates the lock of the calling Outdoor Station
DAuxiliary 1: It activates the first relay of the Due Fili Plus system (Aux 1), stair lights function
FTalk/listen
GVolume control, contrast
HBrightness Control
1
1
Auxiliary 2: It activates the second relay (Aux 2) of the Due Fili Plus system (*)
2
2
Free (*)
3
3
It sends an F1 control to Outdoor Stations (*)
4
4
It sends an F2 control to Outdoor Stations (*)
(*) the functions associated with the keys 1-2-3-4canbemodiedviaconguration,toperformotherauxiliaryfunctionsor
intercom calls.
H G
A D
C
B
F
G
H
1 2 3 4
The video entryphone can be operated using the touch keys described below.

IT
6
7539 Tab Free
LED DESCRIPTION
- When lit permanently, it indicates that the ringtone is muted.
-ItisashingwhenitisreceivingacallfromanOutdoorStationorIndoorStation(differentflashes);
-Itashesduringconguration.
If configured via SaveProg:
–indicationofcallsreceivedandmissedfromtheswitchboard(1flashevery10seconds);
– user away (1 flash every second): the Indoor Station will refuse calls from an Outdoor Station
- Steady light, communication under way
- Flashing during the timeout for sending a call to the reception switchboard.
-Steadylightifanopeninghasbeenleftopen(when thespecicconnection hasbeenmade by
the installer).
-Flashingwhenacongurationisunderway
- Possible "Alert" signalling, see Alert function
Note: All the keys are backlit, they light up when touched.
Some of the LEDs illustrated below only come on in certain conditions.
Status LED

IT
7
7539 Tab Free
Operation
The TAB Free video entryphone is designed to receive calls from Indoor Stations, Outdoor Stations and the Reception
switchboard.
It can also perform the self-start of the Outdoor Station, intercom calls with Indoor Stations and the Reception switchboard.
Calls can be answered and/or the lock of the Outdoor Station can be released using the dedicated key.
Some programmablekeys are also available to activate other functions, such as relay actuation or intercom calls.
The video door entry functions illustrated in the following paragraphs refer to audio/video calls from Outdoor Stations.
In the case of audio only Outdoor Stations, the display will be black.
In the case of a video door entry call with no video signal, the display will be blue.
For the operation of the video entryphone, the ID identification must be configured. To check whether an ID has been allocated to
the video entryphone, proceed as follows:
Functions
ID assigned
ID not assigned or deleted
beep
beep
beep beep
Fortheindoorstationtowork,theIDcodemusthavealreadybeencongured.Tocheckthis,pressakeyonthevideoentryphone
(but not the keys and the volume and brightness keys): if an ID has been assigned to the video entryphone, one beep will
sound, if no ID has been assigned or it has been deleted, 3 beeps will sound.

IT
8
7539 Tab Free
Following a call from an Outdoor Station, the display shows the images filmed and the keyflashes;
Answeringacall
Press the key to answer the call.
To end the conversation, press the key again.
Press the key to release the lock of the Outdoor Station connected, the lock release is also available in stand-by.
N.B.: If it is not configured, the indoor station in stand-by opens the lock for the last calling outdoor station.
N.B.: The activation of other actuators is also possible, among those which can be programmed, using keys :
Lock release

IT
9
7539 Tab Free
Answer a call from an Indoor Station or Reception switchboard
N.B.: if the Reception switchboard is configured to operate with a camera, then the receiver will be able to see the video signal
from the camera.
Other video calls are possible (Due Fili Plus call button 20577, 19577) suitably configured and associated with an "Audio/video
selector for 4 cameras 69AM” or “Video selector for 4 cameras 69AM/T”.
If there is no answer to one or more calls from the Reception switchboard, the LED flashes (if the function was enabled from
SaveProg).
The LED stops flashing after the Indoor Station has answered and returned to stand-by or:
– after the ringtone has been reactivated
– after a self-start
– making any intercom call
N.B.: the missed call signal remains also in the case of a power outage.
Following a call from an Indoor Station or reception switchboard, the keyflashes;
Press the key to answer the call.
To end the conversation, press the key again.

IT
10
7539 Tab Free
Self-start
Onlythevideoisactivated;Thevideoentryphoneshowstheimagelmed
To activate communication press the key. .
To end the conversation, press the key again.
If any communication is already in progress, a busy tone will be heard at the indoor station making the call.
Toself-starttothemasterentrancepanel,brieypressthe key.
If the master entrance panel is audio, press the " " key and press the " ”keywhileitashes(5seconds).
You can also perform the self-start of a specific Outdoor Station by using keys : following appropriate configuration
(see Configurationofakeyforself-startingaspecificoutdoorstation)

IT
11
7539 Tab Free
CallinganIndoorStation(Intercom)
You can call another Indoor Station using keys : following appropriate configuration (see Keyconfigurationto
make intercom callsi).
Press the programmed key for the indoor station to call.
During the call, the indoor station emits a tone in order to signal that the call is being made.
If the indoor station is already engaged with another call, a tone will be heard on the indoor station making the call to indicate that
the user receiving the call is busy.
When the called party answers, the communication is automatically activated.
To end the conversation, press the key.
The maximum length of an intercom conversation is 5 minutes (unless programmed otherwise with SaveProg).

IT
12
7539 Tab Free
CallingaReceptionSwitchboard
To make a call to the reception switchboard (if installed in the system), press the key and, with a timeout of 5s, send the call
by pressing the key.
During the timeout the keyashes.
1
2
Landingcall
You can receive the call from a Landing button (if connected to the FP- M terminals of the indoor station).
The duration of the ringtone cycle depends on how long the key is pressed, for a maximum time of 10s.
FP
M
1
1. Press the push button to send a landing call.

IT
13
7539 Tab Free
This function is used to send a notice to the Reception Switchboard art 40510 even if the Due Fili Plus bus is busy.
To activate this function, you need to connect a push button to terminals FP-M and use the SaveProg software to set the operating
mode (see AlertconfigurationviaSaveProg).
Now the video entryphone goes in stand-by and receives various answers depending on the actions of the Reception switchboard.
These answers may be visual or acoustic depending on the configuration set via SaveProg (see Alertconfigurationvia
SaveProg).
Alert Function
1. Press the push button to send an alert notification
FP
M
1

IT
14
7539 Tab Free
Adjustmentsanduserconfigurations
Ringtonevolumeadjustment
The ringtone volume can be set to 10 levels.
Press the -key to decrease the volume of the melody, the +key to increase the volume of the melody.
1) Press and hold down the key (for 2 s) until the keystartsashingaccompaniedbyanaudiblewarning.
2) press the + or -key (on the left side of the indoor station) to play and adjust the ringtone volume.
3) repeatedly press the + or -key to select the volume you want.
4) press the keytosavethevolumesettingorwait15s.Attheendofconguration,the keystopsashing.
Brightnesscontrol
Adjustment is possible during communications and self-starting, press the - and + key on the right-hand side to adjust the brightness.
Contrast adjustment (volume key)
Adjustment is possible during self-starting (without activating the voice unit). Press the - or + key on the left-hand side to adjust the
contrast.
External call voice unit volume adjustment (10 levels with indoor station in a conversation)
Use the + and - keys on the left-hand side to adjust the desired level. It is adjusted during the conversation with the outdoor station.
Internal call voice unit volume adjustment (10 levels with indoor station in a conversation)
Use the + and - keys on the left-hand side to adjust the desired level. It is adjusted during the conversation with an indoor station or
reception switchboard.
Ringtonemute
To mute the ringtone, press the key.
Deactivationisconrmedwitha"low-pitched"toneandthe key lighting up with a steady light.
Ringtone reactivation is signalled by a "high-pitched" tone and the key going out.

IT
15
7539 Tab Free
Selectingcalltunes
(tobedonewiththeindoorstationonstand-by)
You can select the call ringtones from among 10 melodies
Key 1 is used to select the ENTRANCE PANEL CALL melody.
Key 2 is used to select the INTERCOM CALL melody.
Key 3isusedtoselecttheLANDINGCALLmelody(withspecicelectronicmodule).
1) Press and hold down the key (for 2 s) until the keystartsashingaccompaniedbyanaudiblewarning.
2) Press key 1 or 2 or 3, the indoor station will start playing the last melody in memory.
3) Repeatedly press key 1 or 2 or 3to select the kind of melody you want.
4) Press the keytosavethemelodyorwait15s.Attheendofconguration,theblinking key goes out.

IT
16
7539 Tab Free
Configurations
Thedevicecanbeconguredinthefollowingways:
• “Simplied”congurationmode via the indoor station keys.
N.B.: This conguration mode is available from rmware version 6.34 (also after update).
• “Standard”congurationmode via the indoor station keys.
• Programmingvia"SaveProg”congurationsoftware in the Due Fili Plus system (complete with interface, installed on a PC).
First power up
Perform the device installation (according to the assembly instructions and the installation instructions provided in the printed
instruction sheet supplied) and connect it to the Due Fili Plus bus.
Caution: installation must be carried out by qualified persons in compliance with the current regulations regarding the installation
of electrical equipment in the country where the products are installed;
The indoor stations, after being installed, must be configured by assigning the ID code.
The ID code is unique for each appliance.
All CONFIGURATION operations must be performed with the system switched on, with the indoor station on standby (without
active communications) and only after connecting the entryphones/video entryphones to the system and programming the
entrance panels.
ManualIDcodeconfigurations
TheBasicindoorstationcongurationsareasfollows:
- CongurationoftheID code.
- Orcongurationofthesecondary ID code, to be done when an indoor station needs to be associated with a Master indoor station.

IT
17
7539 Tab Free
1 2 3 4
beep
> 6s
beep BEEP
BEEP
Conguration procedure ("Standard” Mode):
• Press and hold down the key.
• Press the key too and hold them down until the key starts ashing.
• Release the keys.
• Press the key within 5s of releasing the keys and keep it pressed until you hear a warning tone on the indoor station and the
communication is activated between the indoor station and the external electronic unit. If more than 5s passes without the
key being pressed, steps 1, 2 and 3 must be repeated.
• Release the key.
• With a timeout of 25s associate the ID code from the external electronic unit, pressing the key of the outdoor station from which
you wish to receive the call (MASTER). (*)
• TheIDcodeisassociatedwiththeindoorstationandcommunicationisended.Anacousticsignalconrmstheoperationwas
successful. (**)
IDcodeconfiguration
The identication code is programmed by means of a main entrance panel (MASTER), already congured and present in the
system.Theindoorstationissuppliedwithoutanassociatedidenticationcode.Toverifythiscondition,pressthelockreleasekey
and the indoor station should emit a triple “Beep".
Caution:whenconguringtheindoorstationidenticationcode,youonlyhave30secondsfromthemomentyouenter
indoorstationcongurationmodeinwhichtopressthecallbuttonontheoutdoorstationortosendthecode.
Congurationprocedure("Simplied”Mode):
1. Press and hold down the lock release key “ ” for 6 s. When the time runs out the indoor station will emit a “beep” (0.5 s).
3. Release the lock release key “ ”.Whenthekeyisreleasedthecommunicationwillbesignalledbya“beep”withadi󰀨erent
frequency.
3. Press the key on the MASTER outdoor station you wish to receive the call from. (*)
4. TheIDcodeisassociatedwiththeindoorstationandcommunicationisended.Anacousticsignalconrmstheoperationwas
successful. (**)
N.B. (*): This procedure applies to entrance panels with push buttons; for alphanumerical entrance panels, type in the ID
code and confirm with the call key.
N.B. (**): If the system contains an indoor station that already has the same associated identification code (ID), the
entrance panel emits a lower tone and the operation will have to be repeated.

IT
18
7539 Tab Free
1 2 3 4 5
beep
> 6s
beep1
+ 2s
beep2 BEEP
BEEP
Conguration procedure ("Standard” Mode):
• Press and hold down the key on the indoor station.
• Press the key too and hold them down until the key starts ashing.
• Release the keys.
• Press the and keys simultaneously within 5s of releasing the keys and hold them down until you hear a warning tone on
the indoor station and the communication is activated between the indoor station and the external electronic unit. If more than 5s
passes without the and keys being pressed, steps 1, 2 and 3 must be repeated.
• Release keys and .
• With a timeout of 25s associate the Secondary ID code (associated with a master station) from the external electronic unit,
pressing the key on the communicating outdoor station from which you wish to receive the call (MASTER). (*)
• TheIDcodeisassociatedwiththeindoorstationandcommunicationisended.Anacousticsignalconrmstheoperationwas
successful. (**)
SecondaryIDcodeconfiguration
Congurationofthesecondaryidenticationcodeisonlyrequiredwhenmorethanoneindoorstationistobecalledsimultaneously
using the same push button or call code. The indoor stations that are to ring simultaneously must be associated with the same
group. The “master” indoor station is programmed rst by means of the “identication code conguration” procedure described
above,whiletheadditionalgroupindoorstationsareprogrammed with the secondary identication code.Thenumberofindoor
stations that can be associated with the same group without using a SaveProg software is 3 plus a master station.
Congurationprocedure("Simplied”Mode):
1. Press and hold down the lock release key “ ” for 6 s.
When the time runs out the indoor station will emit a “beep” (0.5 s).
2. Continue holding down the lock release key “ ”.
After 2 s more the indoor station emits two “beep” in sequence apart (duration 0.5 s).
3. Release the lock release key “ ”.Whenthekeyisreleasedthecommunicationwillbesignalledbya“beep”withadi󰀨erent
frequency.
4. Press the key on the MASTER outdoor station you wish to receive the call from, corresponding to the “master” indoor station. (*)
5. The secondary ID code is associated with the indoor station and communication is ended.An acoustic signal conrms the
operation was successful. (**)
N.B. (*): This procedure applies to entrance panels with push buttons; for alphanumerical entrance panels, type in the ID
code and confirm with the call key.
N.B. (**): If the system contains an indoor station that already has the same associated identification code (ID), the
entrance panel emits a lower tone and the operation will have to be repeated.

IT
19
7539 Tab Free
Conguration procedure ("Standard” Mode):
• Press and hold down the key on the indoor station to program (calling).
• Also press the key on the indoor station to program (calling) and hold them down until the key starts ashing.
• Release the keys.
• Press and hold down the calling key to program (1 / 2 / 3 / 4 / ).
• Wait for the indoor station to emit a continuous tone.
• Release the key to program on the calling indoor station.
• Press a key on the indoor station to call ( /F1/F2/ ).
• An audible warning on the calling indoor station conrms that the procedure has been correctly completed.
keyconfigurationtomakeintercomcalls( , , , , ).
Congurationprocedure("Simplied”Mode):
1. Press the key to be programmed and hold it down for at least 6 s.
2. When the indoor station has emitted a “beep” release the key being programmed.
3. Press the lock release key on the entryphone/video entryphone you want to call.
4. Another“beep”conrmsthekeyforintercomcallshasbeenprogrammed.
< 60 s
1 2 4
> 6s
beep
3
beep

IT
20
7539 Tab Free
Conguration procedure ("Standard” Mode):
• Press and hold down the key
• Press the key too and hold them down until the key starts ashing.
• Release the keys.
• Press and hold down the key you wish to congure (1 / 2 / 3 / 4 ).
• Wait for the indoor station to emit an audible warning.
• Release the key.
• Call the indoor station from the outdoor station you want to perform a direct self-start:
- On entrance panels with keys, press the key corresponding to the indoor station on which the key is being congured.
- On alphanumeric entrance panels, enter the ID corresponding to the indoor station on which the key is being congured and
conrm with the call key.
• At the end of the procedure described above, the indoor station emits a signal to conrm that the operation has been successful
and it is called by the outdoor station.
Configurationofakeyforself-startofaspecificoutdoorstation( , , , , )
Congurationprocedure("Simplied”Mode):
1. Press the key to be programmed and hold it down for at least 6 s.
2. When the indoor station has emitted a “beep”, release the key being programmed.
3. From the outdoor station concerned, within 60s, make a call to the indoor station being programmed.
4. Ahightoneconrmstheendoftheprocedure.Theindoorstationwillbecalledbytheoutdoorstationconcerned.
3 41
> 6s
beep beep
2
< 60 s
N.B. (*): for entrance panels with push buttons press the call button corresponding to the indoor station, for alphanumerical entrance
panels,typeintheIDcodeandconrmwiththecallkey.