viparspectra KS3000 User manual

USER INSTRUCTIONS
Manual Version: 2021-12-28-001-002
Contact Us:
Follow us on Facebook @ViparSpectra
Sending an email to [email protected]
Contact us via Amazon or eBay message.
www.viparspectra.com
660NM Diodes
LM301H Diodes

SAFETY INFORMATION
Dear Users,
Thank you for choosing our products! Please read this instruction carefully before
using your lights.
1. CAUTION: Do not look directly at the LED bulbs when the lighting equipment is
working.
2. The maximum temperature of the installed environment (ambient temperature) will
ensure the safe operation of the lighting equipment. So you will need to control the
temperature within the installed environment. (Example: mechanical ventilation or
cooling system is required to maintain the temperature within the growing space
below 104°F (or 40°C) when the lighting equipment is in operation).
3. Instructions to guide the installation such that cords:
4. This lighting equipment is for indoor use only. Not water-proof, protect your
lighting equipment from dampness, dust, and water.
5. CAUTION: For horticultural lighting structures, installation shall be performed by
qualified personnel and that the structures are intended for installation subject to
approval by the authority having jurisdiction.
6. Set up your light in the operating environment that allows for adequate air
circulation. Never push objects into the ventilation openings.
7. When cleaning the outside of your light and its components, first, you need to shut
off your light, then unplug the power cord. Using a clean, soft, lint-free cloth to wipe the
light. Avoid getting moisture in any openings.
8. CAUTION: Possibly hazardous optical radiation emitted from this product. Do not
stare at the operating lamp. May be harmful to the eyes.
Are not concealed or extended through a wall, floor, ceiling, or other parts of the building structure,
Are not located above a suspended ceiling or dropped ceiling,
Are not permanently affixed to the building structure,
Are routed so that they are not subject to strain and are protected from physical damage,
Are visible over their entire length, and
Are used within their rated ampacity as determined for the maximum temperature of the installed
environment specified in the instructions.
1 2
* Light housing's temps would become higher after working several hours. Do not
touch the operating lamp.
* SUITABLE FOR OPERATION IN AMBIENT NOT EXCEEDING 104°F (or 40°C).
KS3000
Total Harmonic Distortion
Frequency
Input
LEDs
Actual Power Draw
Feature
Model
50/60Hz
AC100-240V~2.8A
< 15%
SAMSUNG LM301H 3000K, 5000K
OSRAM 660NM
300W±3% at 120V
Dimmable
KS3000
Lifespan
Item Weight
Housing Dimensions
Use for
Flowering Coverage at 12"
Vegetative Coverage at 24"
HID Replacement 600W HPS/MH
≥ 100,000 hours
7.9 lbs
32 × 32 × 1.6 inches
all stages grow and flowering
3.0 × 3.0 ft
3.0 × 3.0 ft
KS3000 SPECIFICATION
KS3000 Full Spectrum LED Lighting
Power Cable Connector Hanging Holder
Power Cable
660NM DiodesLM301H Diodes

43
KS3000 USABLE PPE
PLANTING SUGGESTIONS
Seedlings - You will need to hang the light high due to the delicate nature of seedlings. We
recommend a break-in period of about a week while a seed has broken the surface. The
first set of real leaves should be present while the seedling has been above ground for
about a week.
Clones - Clones are a little bit hardier than fresh seedlings, but still, need to be given gentle
light as they are entirely rootless when first cut, and need to conserve energy and moisture
to transition into a rooting stage.
Vegetative - The deeper red spectrum is utilized less by the plant than when it is in flower.
It uses high levels of white light that are essential for creating lush, thick plants that have
tight internodal spacing and minimal stretching.
Flowering - The plant has much work to do and is preforming many complex biological
processes in producing flowers and fruits. Because of this, the plant now requires large
amounts of light.
Late Flower - Most rapid development has stopped, and the plant is gearing up for the
scene in which the large flowers and fruits will mature or ripen.
If you expose plants to high light intensities too early in the crop cycle, you can damage
chlorophyll pigments causing photo-oxidation (photo-bleaching), so we recommend
slowly increasing your light intensity as your plant develops.
USING SUGGESTIONS
Tested in a 3.0 x 3.0 ft Grow Tent
401
403
400
393
396
393
383 373
386 381
395
388
382
363
371
352
352
372
362
347
359
342 352 352
373
367
376
372
359
356
352
340
361
358
354
345
404 3ft
3ft
Seedling: 50% Distance: 24" (60cm) Vegetative Stage:75% Distance:24"(60cm)
595
595
594
585
590
590
566 556
571 565
570
570
560
560
541
504
553
542
526
510
501
509 520 526
560
551
565
561
548
512
530
510
541
536
507
505
601
KS3000 PPFD MAP
Seedlings / Clones / Mother Plants Vegetative Stage Flowering StageKS3000
Brightness
Average PPFD
Using Hours
Maximum PPFD
Power Draw
Hanging Height (Above Plant)
50%
370 µmol/m²/s
18 on / 6 off
404 µmol/m²/s
24'' (60cm)
150 Watts
75%
548 µmol/m²/s
601 µmol/m²/s
24'' (60cm)
225 Watts
100%
880 µmol/m²/s
18 on / 6 off 12 on / 12 off
1000 µmol/m²/s
12'' (30cm)
300 Watts
Wavelength(nm)
KS3000 SPECTRUM
Spectrum
0.0
0.2
0.4
0.6
0.8
1.0
1.2
700600500
380 800
Flowering Stage:100% Distance:12"(30cm)
Visit our website for more useful suggestions
and PPFD Maps.
( µmol/m²/s )
Seed Vegetative Cutting Vegetative Flower/Fruit /
Reproductiv
Species
Canna Plants 200-400 75-150 400-600 600-1000 (No CO2)
Tomatoes 150-350 75-150 350-600 600+
Cucumbers 100-300 -300-600 600+
Peppers 150-350 -300-600 600+
Usable PPE: 2.38 µmol/J
Hanging Height: 12’’ (30cm)
Ave. PPFD: 880 µmol/m²/s
1000 µmol/m²/s
MAX PPFD:
712.8 µmol/s
Usable PPF:
300W
Power Draw:
2.38 µmol/J
Usable PPE:
Flowering Stage:100% Distance:12"(30cm)
995
990
989
972
977
975
914 904
959 935
947
955
953
900
940
870
788
794
792
755
781
761 904 880
912
904
921
905
920
870
780
744
796
768
754
760
1000
1000
1000
1000
995
990
989
972
977
975
914 904
959 935
947
955
953
900
940
870
788
794
792
755
781
761 904 880
912
904
921
905
920
870
780
744
796
768
754
760
1000
1000
1000
1000

WARRANTY TERMS
1. This warranty applies only if you purchased your products in the United States.
2. We offer 3 years warranty for our KS Series LED grow lights purchased against manu-
facturing defects from the date of purchase. If you need any warranty assistance,
please contact us as soon as possible.
3. The warranty does not cover damage due to high moisture levels, water, power
surges, improper hanging or mounting, incorrectly use, dust build-up, or user modi-
fications.
4. If your light has any quality issue within 30 days, please kindly contact us. We will
email you a prepaid return label if the lights need to be returned to our warranty
center. You can choose:
5. Repairing. If any light has any quality issue over 30 days after delivery, please kindly
contact us to get a satisfactory solution. We can send the part free of charge immedi-
ately if it is missing part or accessory issue. Or you also can choose to return the light
with the provided prepaid shipping label. We will send the light back to you after fixing
it — all for free.
6. Forcustomers outside the US, you will also enjoy 3 years US warranty. Back and forth
shipping cost from your country to our US warranty center would be buyer's responsi-
bility. All repairs are only processed within the United States.
7. If a light was not covered under warranty, we might still be able to perform warranty
service. However, that is at our discretion, and repair may bear a cost that will be
assessed before repairing the light.
Our company reserves the interpretation right of this warranty structure. If you have
any questions about our warranty policy, please kindly contact us.
Replacement. Please send the light back to our warranty center. A new
replacement will be shipped to you for free as soon as we receive the
defective light.
Money-Back. Please send the light back to our warranty center. You will get
your money back as soon as we receive the defective light.
Repairing. We can send the part immediately if it is missing part or accesso-
ry issue. Or you also can choose to return the light. We will send the light
back to you after fixing it. It will not cost any repair charge — all for free.
65
KS3000 Product suspension diagram
Option 1 (Recommended)
Place the LED driver in a safety location outside the grow tent.
Option 2
Hang up the LED driver in a safety location in the grow tent.
2.Connect LED Driver to Light(s)
4. Adjust the brightness based
on your desired light intensity
needs.
1. Connect the driver power
cord to the light. To remove the
connection, twist the locking
ring counter clockwise and pull.
3. Plug the light into an outlet.
2. (KS3000) Connect the power
cord to the driver.
MOUNTING INSTRUCTIONS
3. Connect the rope ratchets with
each hanging kit’s carabiners.
4. Hang up each rope ratchets
in a safety mounting location
and raise them to the desired
hanging height.
1. Unfold your light fixture and
place it on the floor with the
LEDs facing downward.
2. Attach the hanging kits’ clips
(or the rope ratchets) to each
hanging hole on the light.
1.Mounting
34
12