Viper Home 502M User manual

502M Motion Detector
Quick Reference Guide
Congratulations on the purchase of your Viper
Home Security Accessory. This guide walks you
through the process of adding this accessory to your
system and for mounting your accessory.
Note: Make sure you already have a Viper Home
Starter kit or Viper Home Hub installed. Please refer
to the quick reference guides found in these sys-
tems, or visit: www.viper.com/home/support.
1. Log into your Viper Home account at:
home.viper.com
2. To pair the motion detector to your system:
Click on the “Devices” tab
Click “Add New Device”
Click “Add Motion Detector”
3. You are then prompted to insert the batteries
provided within three
minutes. First, remove
the mounting piece/bat-
tery cover on the back of
the motion detector, and
install the AA batteries
provided.
4. Once the batteries are
inserted the system
automatically connects

© 2013 Directed. All rights reserved.2
and confirms the motion detector is paired
with your system.
5. After the motion detector is paired, you can
give it a unique name (i.e. “Living Room”)
In this screen, if you click the “More” button,
you can set up additional options for the de-
vice, such as “arm stay”, or “custom arm”, as
well as select what action the motion detector
performs when triggered.
6. Once completed, click the “Finish” button.
The motion detector is now ready for mount-
ing.
Mounting instructions:
1. The spherical lens must be
pointing down and placed on a
wall where it will detect move-
ment inside the room.
2. The device should be placed
approximately 86” from the
floor and at least 4” from the
ceiling.
Note: Do not place the device
in an area that receives direct
sunlight.
3. Once you have chosen the
desired mounting location,
remove the backing from the
tape on the battery cover and mount the de-
vice. Alternatively, you can also mount the de-
vice with standard drywall screws by screwing
Ceiling
Floor

© 2013 Directed. All rights reserved. 3
the mounting piece directly to the wall through
the circular dimples on the mounting piece.
Additional Information
Further information – For additional support,
including additional information videos and installa-
tion tips, visit: www.viper.com/home/support
Warranty Information - Your system comes with
a one year warranty. For complete warranty details
visit: www.viper.com/home/support
This device is intended for indoor use only
and should not be mounted in any outside areas.
Mounting the device outside will void the warranty.
FCC/ID Notice: This device complies with Part 15
of FCC rules. Operation is subject to the following
conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any
interference received, including interference that
may cause undesired operation.
CAUTION! Changes or modifications not expressly
approved by the party responsible for compliance
could void the user’s authority to operate this device.

Directed is committed to delivering
world class quality products and services
that excite and delight our customers.
Vista, CA 92081
www.viper.com
IG502M 2013-09
© 2013 Directed. All rights reserved.