Vitea Care Bingo User manual

USER’S MANUAL
Bingo
Rehabilitative chair
Edtion MG 05.2016
1

Spis treści
1. Introduction..................................................................................................................................... 3
2. Description of the product............................................................................................................... 3
3. Purpose............................................................................................................................................ 4
4. Contraindications............................................................................................................................. 4
5. Use................................................................................................................................................... 4
6. Safety of use................................................................................................................................... 5
7. Service and maintenance................................................................................................................. 6
8. Technical parameters:...................................................................................................................... 8
9. Symbols........................................................................................................................................... 8
2

1. Introduction
Thank you very much for choosing our product. We strongly believe that this device will meet your
expectations. We strongly recommend reading this document prior to the first use of the device. This
user manual is submitted in order to present the essential information related with the safe use of this
product. Following these recommendations shall considerably prolong the durability and aesthetics of
the product. We would also like to emphasize that we are doing our best to constantly improve the
quality of our products, which may result in slight changes, which are not always included in the user
manual.
2. Description of the product
Figure 1.
1. Specially profiled, height adjustable headrest.
2. Height adjustable support for cervical spine.
3. Angle and depth adjustable seat (0-40°).
4. Angle adjustable backrest (from sitting to horizontal position).
5. Angle and height adjustable footrest.
6. Adjustable foot platforms (movableforward/backward, left/right).
7. Adjustable abduction wedge.
8. Adjustable lateral supports for trunk stabilization.
9. Angle and height adjustable armrests.
10. Angle and height adjustable tray.
11. Swivel wheels with parking brake.
12. Positioning vest.
3

3. Purpose
Wooden rehabilitative chair for disabled children, children diagnosed with nervous system disorder,
children who have difficulty sitting. Multifunctional chair adjusts to patient’s needs. Solid
construction and wheels with parking brakes ensure safety.
The frame is made of plywood covered with atoxic, transparent coat. Soft, polyester upholstery
ensures optimal comfort of use.
4. Contraindications
Contraindications to a sitting position. Never leave a child alone in the device without adult
supervision.
In addition, please refer to the instruction manual purchased rehabilitative chair
.
5. Use
Before the first use of the chair, always consult qualified medical personnel/physiotherapist in
order to
adjust the chair and learn about rehabilitation process.
a) Take the chair out of the box and check if there are any deformations or
scratches.
b) Assemble the foot platforms-unscrew the knob “l” (Figure 2.), move the platforms
and
screw the “l” knob (Figure 1).
c) Make sure that all the screw joint are well tighten.
d) Block the wheels by pushing the blockade down.
e) Assemble the abduction wedge.
f) Adjust the chair to individual needs by using the knobs:
•seat angle („A” knob) (Figure 3.)
•backrest angle („E” knob) (Figure 4.)
•headrest angle („G” knob) (Figure 4.)
•height of the cervical spine support („H” knob) (Figure 4.)
•footrest angle („K” knob) (Figure 2.)
•height, angle and distance of foot platforms („I” knob) (Figure 3.)
•angle of foot platforms („J” knob) (Figure 2.)
•agrest height and angle („B”knob) (Figure 3.)
•position of hip blockade ( „F” knob ) (Figure 4.)
g) Tighten the “C” knob. (Figure 2.)
h) Fasten the postitioning vest.
i) Fasten the foot straps.
j) Assemble the tray – slip it into the armrests and tighten the „L” screws. (Figure 2.)
k) Adjust the tray angle („D” knob). (Figure 3.)
4

Figure 2. Figure 3.
Figure 4.
6. Safety of use
WARNING!
a) When placing the child into the chair, always set the
parking brakes.
b) Always help the child to get into and off the chair.
c) Never leave a child in the chair unattended.
d) The chair is designed to be used indoors, only on flat surfaces.,
e) Do not use the chair on soft, uneven, unprotected surfaces such
as grass, gravel, sand – risk of
injury!
5

f) The chair is designed for children 85-145 cm tall (the measurement taken when
the child is lying down) and max
weight 35 kg.
g) The footrest is designed to provide child’s foot support – never
stand on the footrest !
h) Always protect the chair against high temperature and keep it
away from sources of fire
i) You must regularly (at least every three months) check the
chair’s condition. Before a
control, please, clean the chair (it may
help to disclose hidden damages). You should always
check:
-brake efficiency,
-all adjustment elements (blockades, knobs, screws),
-stability and condition of chair.
j) All repairs should be performed by qualified personnel and during the warranty only by
authorised service
point.
k) The product may include small parts – risk of swallowing !.
7. Service and maintenance
a) Every time check the regulation screws and tighten them if necessary.
b) Clean the frame using moist cloth.
c) Regularly clean the movable parts (wheels, footrest, screws) – remove
threads, hair etc.
d) In order to remove the stain from the upholstery you should clean it using a cloth, mild
detergents and lukewarm water. Then use a dry, absorbent
cloth. When removing the stain,
never use too wet cloth – the stain may
become bigger and the upholstery may be damaged.
Do not iron.
e) In order to keep the chair in good condition, it is crucial to clean it regularly
and store in an
appropriate place. Storing the chair in places of high
humidity (laundry, bath house) or
outside, together with lack of hygiene, may
result in losing of its parameters.
It is forbidden to use:
•solving agents,
•toilet cleansing agents,
•agents containing chlorine,
•sharp brushes and sharp objects,
•corrosive cleaning agents.
•Do not clean the chair with the use of pressure pr vapour aggregates!
Frequency
Control area
Remarks
Before first use
Control of the technical
condition of all elements in the
package.
Check whether all elements of
the chair have no visible
mechanical damage.
Before every use
Checking of parking locks.
Make sure that all blockades are
functioning properly.
Every two weeks
Tightening of screws, nuts, as
well as their proper placement.
Make sure that all screws and
nuts are properly tightened.
Every two months
Purity, general condition.
In case of any mechanical
damages, it is crucial to
6

immediately contact the
manufacturer.
Once a week
Wheels
Control the condition of wheels,
and remove any dust and sand
from wheels.
Once a month
Wheel axes
Wheel axes should be
lubricated by dropping several
drops of maintenance and
lubrication agent between the
axis and the hub.
TRANSPORTING AND MOVING THE STANDING FRAME
When transporting the chair, it is crucial to focus on the following aspects:
•the chair has to be transported without the user sitting in it - this device has not been anticipated
as an additional seat in the transportation vehicle;
•stabilizing belts need to be attached to strong points of the standing frame; fix the
chair only with the help of construction elements;
•after fastening belts, the standing frame should not move in any direction;
•when transporting, apply the brakes on every wheel.
When moving the device, it is crucial to focus on the following aspects:
•the chair can be moved only when the user is not sitting in it;
•the chair has to be in its sitting position, which enables to grab all 4 points indicated in
the figure below, on both sides of the chair, by selecting the emphasized variant:
Figure 5.
7

Repair
•In case when it is necessary to repair the device, please turn to the manufacturer.
Customer service
•If you have any further questions or you need help, please contact the manufacturer.
8. Technical parameters:
Permitted user weight
35 kg
Life of the product
5 years from the date of production
Backrest height (with headrest) (cm)
46-62
Seat depth (cm)
25-41
Footrest height (cm)
25-31
Armrest height (cm)
68-76
Seat width (cm)
15-35
Backrest width (cm)
15-27
Chair width (cm)
58
Length of the chair (cm)
95 - 150
Weight of a fully equipped chair (kg)
27
Stated on the product
Materials: Wood, steel, nylon, polyester fabric, PU foam
9. Symbols
Confirmation of EU/EC Declaration of conformity
Manufacturer
Production date
Read the operator manual
8

Warning
Reference number
Serial number
Protect from moisture
Protect from sunlight
Maximum permitted user weight
Interior use
The maximum safe angle of the incline
Risk of trapping fingers
Product intended for vehicle transport.
9

Product is not intended to be used as a seat during transportation by means of
a motor vehicle.
Product intended for carriage by air
10. Contact details:
mdh sp. z o.o.
ul. ks. W. Tymienieckiego 22/24 90-349 Łódź, Poland
tel. [phone]
fax. [phone]
www.mdh.pl www.viteacare.com
10