Vivo DESK-V000Q User manual

29.5” x 22.5” Sit-Stand Desktop Workstation
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000q
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: DESK-V000Q

2 3
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity. We
cannot be liable for damage or injury caused by incorrect assembly or inappropriate use.
PACKAGE CONTENTS
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 3
STEP 4
Re-install the knobs on the desk (A) by turning
them clockwise to tighten.
WARNING!
A (x1)
Adjustable
Desktop
B(x1)
Keyboard
Tray
STEP 1
Squeeze the handles to raise the desk (A).
STEP 2
Remove the pre-installed lower knobs
on the desktop (A) by turning them
counter-clockwise.
Adjust as Desired
Align the holes on the keyboard tray (B) to match the holes on the desktop (A).
33lbs
14.97kg
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.

Last Updated: 10/22/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654