Vivo CART-V07M User manual

Black 32” Mobile Presentation Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-v07m
SKU: CART-V07M
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
4mm Allen
Wrench
B(x8)
M6x12
C(x4)
M6x16
D (x8)
M6x8
E (x8)
M5x14
F (x4)
Caster
G (x1)
Wrench
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
88lbs
(39.92kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
1(x1) Desktop
2 (x1) Support Frame
3 (x1) Rear Support Bracket
4 (x1) Crank Support
5 (x1) Crank Handle
6 (x1) Column
7 (x1) Front Support Bracket
8 (x1) Base
SCREW PACKAGE

3
ASSEMBLY STEPS
STEP 1
Assemble the base (8) to the column (6) using
M6x16 bolts (C) and tighten with the Allen
wrench (A). Screw the casters (F) into the base,
and tighten using the wrench (G).
C
S=4mm F
G

4
STEP 2
Place the support frame (2) on top of the column with the slots facing down and long end forward,
making sure the pre-installed bolts on the column insert into the slots. Tighten bolts with Allen
wrench (A).
S=4mm

5
STEP 3
Install the rear support bracket (3) and front
support bracket (7) to the support frame (2)
using x6 M6x12 bolts (B), and tighten with the
Allen wrench (A).
STEP 4
Slide crank support (4) into the frame (3). Secure the crank support to the rear support bracket
(3) using x6 M6x8 bolts (D). Tighten with Allen wrench (A) and slide the crank handle (5) into the
support.
B
S=4mm
D
S=4mm
7

6
STEP 5
Install the desktop (1) to the top of the frame using x6 M5x14 bolts (E) and tighten with a
Phillips screwdriver.
E

7
STEP 6
Place monitor, keyboard, mouse and other items on the desk. Raise and lower the desk by turning
the crank.

LAST UPDATED: 09/08/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303