Vivo DESK-V402B User manual

4
3
2
h
h
B4
A3x4
A6x2
2
1
CHAIR ASSEMBLY INSTRUCTIONS
CAUTION!
1.This product is intended for indoor use only.
2.This product should be placed on the flat ground.
3.Once water, oil and other liquid adhere to the surface of product, you should quickly wipe it clean.
4.Please regularly check and fasten joint parts in case of product shake and loosening.
5.Do not lay product in place of the corrosive gas and moisture in case of surface damage.
6.Never fasten screws tightly before all screws fixed to the right place.
7.Please use damp cloth to clean the desktop.
B1 B3 B4 B5
B6 B8
B2
A3x4A1x12 A2x8 A4x4 A6x2 A8x1A7x1A5x4
B1
B3
B2
A1x4
A2x4 A7
B5
A
B
or
ASSEMBLY INSTRUCTIONS
Healthy Ergo
Study Desk & Chair
B7
D6 M6x12 M6 M6x35

6
8
7
5
DESK ASSEMBLY INSTRUCTIONS
B6
B7
10
HOW TO ADJUST HEIGHT
Desk and chair can be adjusted by pulling up. Step on the support bar and pull up to the right height.
HOW TO LOWER HEIGHT
Pull up to the max height and lower it slowly to the most bottom, then pull up to the right height.
119
300-440mm
It is necessory to loosen or tighten
screws using an Allen Key as needed.
HEIGHT ADJUSTMENT
0°-50°
540-720mm
B8
H
H
A7
A5x4
A1x4
A4x4
A8
A7
A1x4
A2x4
· Lossen the knobs before adjusting height of
desk/chair.
· Adjust height of desk/chair to which you'd like,
then tighten the knob.
Note: Do not adjust height of desk/chair after
tightening the knobs.
Note:
Silk-printed
side should be
outside while
assembling.
54
56
58
60
54
56
58
60