Vivo DESK-TOP1G User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
SKU: DESK-TOP1G/R
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
63” x 32” Table Top
https://vivo-us.com/products/desk-top1b

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
PACKAGE CONTENTS
Phillips
Screwdriver
B (x1)
Middle Panel
A (x1)
Right Panel
E (x3)
Grommet
Cover
C (x1)
Le Panel
S-A (x30)
ST4.2x16mm
Screw
D (x4)
Support Bar
S-B (x6)
Wooden
Dowel Pin
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: CHOKING HAZARD
TOOLS NEEDED
STEP 1
Place Desktop Panels (A, B, C) upside down on a protective surface and insert Wooden Dowel Pins
(S-B) into Middle Panel (B). Connect Le Panel (A) and Right Panel (C) to Middle Panel (B) using
Wooden Dowel Pins (S-B).
ASSEMBLY STEPS
A
B
C
S-B

3
STEP 2
STEP 2
Attach Support Bars (D) to predrilled holes in desktop assembly using ST4.2x16mm Screws (S-A) and a
phillips screwdriver.
Place Grommet Covers (E) into grommet holes. Covers can be used for cable management.
STEP 3
Right Panel (A) Le Panel (C)
Place desk frame upside down on the desktop assembly. Adjust frame width to match desktop
mounting holes, and secure frame to desktop assembly using ST4.2x16mm Screws (S-A) and a Phillips
screwdriver. For VIVO frames, pre-drilled holes have been included for most control panels and crank
handles.
NOTE: Holes for some control panels and cranks are not pre-drilled. In this case, you must drill your
own.
Bottom Side
Pre-drilled holes for panels and cranks
S-A
D
E

LAST UPDATED: 06/12/2023
REV3.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303