Vivo CHAIR-K04RW User manual

Wooden Rocking Kneeling Chair - White Seat
Instruction Manual
SKU: CHAIR-K04RW
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/chair-k04rw
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
C (x1)
Front Frame
Support
E (x1)
Seat Pad
F (x1)
Knee Pad
S-C (x2)
M6x80 Screw
S-B (x2)
Barrel Nut
T-A (x1)
4mm Allen
Wrench
B (x1)
Le Leg
A (x1)
Right Leg
D (x1)
Rear Frame
Support
Phillips
Screwdriver
250lbs
(113.40kg)
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose
that is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. Do not place
fingers under rockers. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
WARNING!
S-E (x6)
M6x30 Screw
S-D (x4)
M6x40 Screw
S-A (x6)
Wood Dowel
Pin

3
ASSEMBLY STEPS
STEP 1
Insert Wood Dowel Pins (S-A) into Right Leg (A) and Le Leg (B). For the front of each leg,
insert a pin into the front and back holes. For the back of each leg, insert a pin into the
center hole only.
FRONT BACK
S-A
A
B

STEP 2
Insert Barrel Nut (S-B) into the hole underneath Front Frame Support (C). Mount Front
Frame Support (C) to Le Leg (B) with M6x80 Screw (S-C), making sure the wider end of
Front Frame Support (C) is facing forward. Tighten M6x80 Screw (S-C) with 4mm Allen
Wrench (T-A).
4
Wider End
S-B
C
B
S-C
T-A

STEP 3
Mount Rear Frame Support (D) to Le Leg (B) with M6x40 Screws (S-D), making sure the
wider end of Rear Frame Support (D) is facing down. Tighten M6x40 Screws (S-D) with
4mm Allen Wrench (T-A).
STEP 4
Attach Right Leg (A) to chair assembly. Insert Barrel Nut (S-B) and M6x80 Screw (S-C) into
Front Frame Support (C) and M6x40 Screws (S-D) into Rear Frame Support (D). Tighten all
screws with the 4mm Allen Wrench (T-A).
D
B
S-D
T-A
5
A
S-B
S-C
C
S-D
D
T-A

Mount Seat Pad (E) with the rounded end facing forward to the assembled frame using
M6x30 Screws (S-E). Tighten screws with 4mm Allen Wrench (T-A).
STEP 5
STEP 6
Secure Knee Pad (F) using M6x30 Screws (S-E). Tighten screws with 4mm Allen Wrench
(T-A).
E
T-A
S-E
F
T-A
S-E
6

STEP 7
The chair is now ready for use.
NOTE: The wood fibers may compress over time as the chair is used, causing the screws to
loosen. 4mm Allen Wrench (T-A) should be kept available to periodically
re-tighten the screws.
T-A
7

LAST UPDATED: 06/29/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303