Vivo DESK-SF01W User manual

White Wall Mounted 28” Desk with Drawer
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-sf01w
SKU: DESK-SF01W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
STEP 2
Insert x2 Cam Lock Screws (M) into front of Rear Panel (B) as shown. Insert x4 Wood Dowel
Pins (N) into top and sides of Rear Panel, and x4 Pins into rear and sides of Bottom Panel (C).
Assemble Rear Panel to Bottom Panel.
PACKAGE CONTENTS
TOOLS NEEDED
22lbs
(9.98kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x1)
Desktop
B(x1)
Rear Panel
C(x1)
Bottom Panel
D (x1)
Rear Drawer
Panel
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
Drill
Level
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS.
ADULT SUPERVISION IS REQUIRED.
ASSEMBLY STEPS
STEP 1
Pull open Slider (K), then attach Slider to Le Panel (I) using x2 Screws (P), making sure the
arrow is pointing towards the front. Repeat for Right Panel (J).
E (x1)
Floor Panel
F(x1)
Front Drawer
Panel
G(x1)
Le Drawer
Panel
H (x1)
Right Drawer
Panel
I (x1)
Le Panel
J (x1)
Right Panel
K(x2)
Slider
L (x2)
Corner Brace
M (x32)
Cam Lock Screw
N(x24)
Wood Dowel Pin
O(x32)
Cam Lock Nut
P (x18)
Screw
W-A (x2)
Wall Screw
W-B (x2)
Concrete Anchor
W-C (x2)
Washer
I
G
J
H
D
B
F
E
C
A
2
P
K
I
P
1
C
M
N
B
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting hardware for brick and concrete walls. If unsure, please contact us at
vivo-us.com, email at [email protected], or call us at 309-278-5303.

4
STEP 7
Insert x6 Cam Lock Screws (M) into bottom of Desktop (A). Place Desktop onto frame assembly.
STEP 8
STEP 9
Insert x2 Cam Lock Screws (M) into front of Rear Drawer Panel. Insert x2 Wood Dowel Pins
(N) into sides of Rear Drawer Panel, and x6 Pins into edges of Floor Panel (E). Assemble Rear
Drawer Panel to Floor Panel.
Insert x2 Cam Lock Nuts (O) into Le Panel (I), x2 Nuts into Right Panel (J), and x2 nuts into
Rear Panel (B). Turn all Nuts clockwise using a Phillips screwdriver to secure Desktop (A).
STEP 3
Insert x4 Cam Lock Screws (M) into Le Panel (I), and x2 Wood Dowel Pins (N) into top of Le
Panel. Repeat for Right Panel (J). Assemble Le and Right Panels to previously assembled
Rear and Bottom Panels (B, C).
STEP 5
Remove covers from Corner Braces (L).
N
M
STEP 4
Insert x6 Cam Lock Nuts (O) into top of Bottom Panel (C) and x4 Nuts into back of Rear Panel
(B). Turn all Nuts clockwise using a Phillips screwdriver to lock Panels together.
O
STEP 6
Attach Corner Braces (L) to Le and Right Panels (I, J) using x8 Screws (P).
L
L1
L2
L2 P
A
M
O
E
D
N
M

STEP 13
OPTION A: Wood Wall
Installation
Place Desk against wall
and mark drilling locations
through Corner Braces (L).
Use of a level and stud finder
is highly recommended. If
mounting holes do not align
with studs, we recommend
mounting a solid wood panel
to the wall so the desk may
be fully supported.
Using a 3/16” drill bit, drill
holes 2.2” deep into marked
locations. Mount desk to
wall using Wall Screws (W-A)
and Washers (W-C).
STEP 14
Pull Sliders (K) all the way forward.
Secure assembled drawer to Sliders
using x4 Screws (P). Push drawer back
into desk.
STEP 10
Insert x4 Cam Lock Screws (M) into Right Drawer Panel (H) and x1 Wood Dowel Pin into front.
Repeat for Le Drawer Panel (G). Insert x6 Cam Lock Screws into Front Drawer Panel (F).
STEP 11
Assemble Le and Right Drawer Panels (G, H) to previously assembled Floor and Rear Drawer Panels
(D, E), then assemble Front Panel (F) to drawer.
STEP 12
Insert x16 Cam Lock Nuts (O) into Rear, Le, Right and Floor Panels of drawer. Turn all Nuts
clockwise with a Phillips screwdriver to lock assembled drawer together. Do not assemble
drawer to desk at this time.
G
F
N
M
H
OPTION B: Brick/Concrete Wall
Installation
Place Desk against wall and mark
drilling locations through Corner
Braces (L). Use of a level is highly
recommended.
Using a 3/8” drill bit, drill holes 2.4”
deep into marked locations, then
insert Concrete Anchors (W-B) into
holes. Mount desk to wall using Wall
Screws (W-A) and Washers (W-C).
O
O
N
uu
√
1 2
W-A
W-C
L1
u
ø 4.5mm
ø 10mm
P
W-A
W-C
W-B
L1
O
N
uu
√
1 2
NOTE: Do not use Concrete Anchors
(W-B) with wood walls.

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303