Vivo DESK-EP40TB User manual

Black 40" x 24" Electric Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-ep40tb
SKU: DESK-EP40TB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
154lbs
(70kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
PACKAGE CONTENTS
A (x1)
Desktop
B (x1)
Crossbar
C(x2)
Side Bracket
D(x1)
Sync Rod
E(x1)
Leg
F (x1)
Motorized Leg
G (x2)
Foot
S-A (x8)
M6x35mm Screw
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK,
PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO
REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
S-B (x10)
M6x11mm Screw
S-C (x22)
M5x16mm Screw
M(x2)
Cable Clip
T-A (x1)
2mm Allen Wrench
T-B (x1)
5mm Allen Wrench
TOOLS NEEDED
Phillips
Screwdriver
H (x2)
Connecting Plate
I (x1)
AC Adapter
N(x12)
Rubber Pad
NOTE SOME EXTRA HARDWARE INCLUDED MAY NOT BE USED.
K (x1)
Controller
L (x2)
Heaphone Hook
S-D (x6)
Wooden Dowel

3
STEP 1
ASSEMBLY STEPS
Assemble Crossbar (B) to Leg (E) and Motorized Leg (F) using M6x11mm Screws (S-B) and 5mm Allen
Wrench (T-B).
STEP 2
S-B F
EB
G
E
S-A
F
T-B
Connect Foot (G) to underside of Leg (E) and Motorized Leg (F) using M6x35mm Screws (S-A) and
5mm Allen Wrench (T-B).
T-B

4
STEP 3
Return assembly upright and attach Side Brackets (C) to side of Leg (E) and Motorized Leg (F) using
M6x11mm Screws (S-B) and 5mm Allen Wrench (T-B).
F
T-B
S-B
C
E
STEP 4
K
1
2
3
4
NT-A
D
B
C
Loosen the knob on the Sync Rod (D) and extend the hex sha. Insert hex sha into the Leg (E),
making sure the metal retaining ring makes contact with the Leg (E). While holding the hex sha with
one hand, extend Sync Rod (D) onto the spline sha of Motorized Leg (F). Tighten Sync Rod (D) using
2mm Allen Wrench (T-A). Retighten knob. Apply Anti-Vibration Pads (N) to Side Brackets (C).

5
STEP 5
Place Wooden Dowels (S-D) into pre-drilled holes in Desktop (A), then push pieces together to form one
desktop. Secure using Connecting Plate (H), M5x16mm Screws (S-C), and a Phillips screwdriver.
Flip desk assembly over and secure to assembled Desktop (A) using M5x16mm Screws (S-C) and a
Phillips screwdriver. Attach Headphone Hook (L) to Desktop (A) using M6x16mm Screws (S-C)
and a Phillips screwdriver.
S-D
H
S-C
A
L
S-C
S-C
A

6
STEP 6
Connect Controller (K) to Desktop (A) using M5x16mm Screws (S-C) and a Phillips screwdriver.
Connect cable from Motorized Leg (F) to Controller (H), as shown below. Connect AC Adapter (I) to
Controller (H). Secure cables to Desktop (A) using Cable Clips (M).
K
A
S-C
I
M
F
AK

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
UP ARROW
Press and hold to raise desk height.
Release button when desired height is
achieved.
DOWN ARROW
Press and hold to lower desk height.
Release button when desired height is
achieved.
RESET PROCESS
Press and hold the DOWN ARROW for at
least 5 seconds until the leg reaches the
lowest height setting and then moves
back up slightly. Reset is complete.
CONTROLLER

LAST UPDATED: 09/01/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303