Vivo DESK-V000KLW User manual

White Corner Desk Riser
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000kl
SKU: DESK-V000KLW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
TOOLS NEEDED
Scissors 33 lbs
(15kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
WARNING!
Phillips
Screwdriver
A (x1)
Desk
B(x1)
Keyboard Tray
S-A (x4)
Sleeve Nut with
Screw
C (x2)
Cable Clip
D (x3)
Foam Pad
STEP 1
Separate Sleeve Nut with Screw (S-A) into
Sleeve Nut (S-A1) and Screw (S-A2).
Press Foot Pads (E) into holes in base
of Desk (A). Cut the large plastic ties on
bottom of Desk (A).
CAUTION: Do not squeeze the release
handle with the desk in a sideways or
upside-down position.
E (x4)
Foot Pad
STEP 3
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
4.4lbs
(2kg)
Keyboard TrayDesk
STEP 2
Apply Pads (D) to underside of Keyboard Tray
(B). Press Sleeve Nuts (S-A1) into holes on top of
Keyboard Tray (B).
S-A S-A1 S-A2
D
B
S-A1
A
E

3
STEP 4
Grommet Mount
CAUTION!
Raise desktop slowly
to keep items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
Failure to follow these instructions may result in property damage and/or personal injury.
If installing a grommet compatible monitor mount, remove the plastic cap from the rear-center of the
desktop. Install the mount to the open hole according to the mount’s directions.
Place Desk (A) right-side up on a table.
Raise the desk by squeezing the handle
underneath the desktop.
Place Keyboard Tray (B) on metal brackets on Desk (A). Secure keyboard tray to brackets using
Screws (S-A2) and a Phillips screwdriver.
B
A
S-A2
Apply Cable Clips (C) to underside of desk assembly.
C
A

LAST UPDATED:08/08/2022
REV3
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303