Vivo DESK-TOP72-30WE User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
SKU: DESK-TOP72-30WE
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
72” x 30” Table Top
https://vivo-us.com/products/desk-top72-30b

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
Phillips
Screwdriver
B (x1)
Middle Panel
A (x1)
Right Panel
C (x1)
Le Panel
S-B (x16)
ST4.2x16mm
Screw
D (x4)
Support Bar
S-A (x6)
Wooden
Dowel Pin
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: CHOKING HAZARD
TOOLS NEEDED
STEP 1
Place Desktop Panels (A, B, C) upside down on a protective surface and insert Wooden Dowel Pins
(S-A) into Middle Panel (B). Connect Right Panel (A) and Le Panel (C) to Middle Panel (B) using
Wooden Dowel Pins (S-A).
ASSEMBLY STEPS
A
B
C
S-A

3
STEP 2
Attach Support Bars (D) to predrilled holes in desktop assembly using ST4.2x16mm Screws (S-B) and a
Phillips screwdriver. Remove protective film from whiteboard surface before use.
STEP 3
Right Panel (A) Le Panel (C)
Place desk frame upside down on the desktop assembly. Adjust frame width to match desktop
mounting holes, and secure frame to desktop assembly using hardware provided in your desk frame
kit. For VIVO frames, pre-drilled holes have been included for most control panels and crank handles.
NOTE: Holes for some control panels and cranks are not pre-drilled. In this case, you must drill your
own.
Bottom Side
Pre-drilled holes for panels and cranks
S-B
D

LAST UPDATED: 10/17/2023
REV1
v1.0
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303