Vivo DESK-TOP1W User manual

White 63” x 32” Table Top
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-top1w
SKU: DESK-TOP1W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
WARNING!
B (x1)
Desktop Section
STEP 2 (Electric Desk Only)
Mount cable management tray with support
brackets from desk frame to rear support
bar (A) using the thumbscrews from the tray
support brackets.
A (x2)
Support Bar
C (x24)
M5x12
Mounting to an Electric Height Adjustable Desk Base
Place and align desktop section (B) upside down
on protective surface. Assemble support bars (A)
to desktop using 12 screws (C).
STEP 3a
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Place electric height adjustable desk frame upside
down on the desktop. Adjust frame width to match
desktop mounting holes, and secure frame to
desktop using 8 screws (C).
NOTE: Some electric desk frames include rubber
dampening pads. If desktop screws cannot be
secured, remove pads from frame. If using a
compatible VIVO desk frame, do NOT use the 7/8"
screws included with the frame. Use only the
M5x12mm screws included with this desktop.
D (x2)
5/8" Screw

3
Mount control panel to mounting holes on le or right side of desktop using 5/8" screws (D) included
with the desktop. Then, mount to an electric height adjustable desk base.
NOTE: If using a compatible VIVO desk frame, do NOT use the 3/4" screws included with the frame. Use
only the 5/8" screws included with this desktop.
STEP 4a
Mounting to a Manual Height Adjustable Desk Base
STEP 3b
Place manual height adjustable desk frame upside down
on desktop, making sure the crank gearbox is on the same
side as the crank mounting holes in the desktop. Adjust
frame width to match desktop mounting holes, and secure
frame to desktop using 8 screws (C).
STEP 4b
Mount to a manual height adjustable desk frame. Attach crank to desk frame. Align crank support with
mounting holes in desktop and secure using 4 screws (C).
NOTE: If using a compatible VIVO desk frame, do
NOT use the 7/8" screws included with the frame.
Use only the M5x12mm screws included with this
desktop.

LAST UPDATED: 07/07/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303