Vivo DESK-KN01C User manual

Gray / Light Wood Kids' Kneeling Chair and Desk
Instruction Manual
SKU: DESK-KN01C
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-kn01c
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
PACKAGE CONTENTS
WARNING!
STEP 1
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
250lbs
(113.40kg)
A (x4)
M6x16 Screw
B(x2)
M8x15
C(x1)
M8x20
D (x3)
D8 Washer
E(x1)
Support
Bracket
F (x1)
Desktop
G (x1)
Chair
H (x1)
Allen Wrench
Mount the Support Bracket (E) to the underside
of the Desktop (F) using the M6x16 Screws (A)
and tighten with the Allen Wrench (H). The
hinges of the Support Bracket must be facing
towards the back of the Desktop.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Use this product on a stable, level surface. Do not use this product for any purpose that
is not explicitly specified in this manual. Do not exceed weight capacity. Do not stand on this product. We cannot be
liable for damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.

3
STEP 2
STEP 3
Unfold the Chair (G) and place upright on
the floor. Pull out on the pin on the seat pad
support post, place the post on one of the four
ratchet positions, then release the pin. Insert
the Support Bracket (E) with Desktop (F) into
the upper post of the Chair, and secure using
the M8x20 Knob (C) with D8 Washer (D).
Adjust the seat angle by pulling out on the pin
in the lower support post. While holding the
pin out, adjust the support post to one of four
positions as shown, and then release the pin
to secure.
To adjust the Desktop height, loosen the
M8x20 Knob (C), slide up or down to the
desired position, and then retighten the Knob.
STEP 4
With the Support Bracket (E) in the folded
position, insert and tighten the M8x15 Knobs (B)
with D8 Washers (D) into the two front holes.
To fold the desk, pull out on the seat pad support
pin, pull the post and seat back and down, and
release the pin. Li up the knee pads and fold
the frame of the Chair (G), then remove the
M8x15 Knobs (B) with Washers (D) from the
Support Bracket (E) and li the Desktop (F) into
the flat position. The Knobs with Washers may
be screwed back into the Support Bracket (B) for
storage.
G
D
F
E
B
and

LAST UPDATED: 09/08/2021
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303