Vivo DESK-V000V Series User manual

Black Desk Riser
Follow along step-by-step with our video walk through by scanning
the QR code with your mobile device or by following the product
link: vivo-us.com/products/desk-v000v
Instruction Manual
SKU: DESK-V000V
ASSEMBLY VIDEO AVAILABLE:
[email protected]om www.vivo-us.com 309-278-5303

Contact Us First!
PERSONABLE CUSTOMER SUPPORT
Our friendly product support team is here to help!
DO NOT RETURN ITEM
We’re Here for You!
Missing a Part?
Our customer-minded support team is here for YOU,
Monday-Friday 7am-7pm CST.
We oer immediate assistance with rapid response times
from customer service agents and product techncians to
help you every step of the way!
Monday-Friday
Chat Us:
www.vivo-us.com
Give us a Call:
309-278-5303
Email Us:
[email protected]om
If any parts are received damaged / defective OR you are
missing a part, please reach out to us within 30 days of
product delievery to have it replaced at no cost.
We are happy to replace parts to ensure you have a fully
functioning product
7AM - 7PM

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a qualified
technician. Check carefully to make sure there are no missing
or defective parts. Improper installation may cause damage or
serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We
cannot be liable for damage or injury caused by improper mounting, incorrect
assembly or inappropriate use.
PRE-ASSEMBLY | BEFORE YOU BEGIN
Product Warranty
Returns | Product Didn’t Work Out?
For the most up to date details on your product’s warranty, please visit
the product’s listing on our website or reach out to customer support.
vivo-us.com/products/desk-v000v
We oer a hassle-free 30 day return on all products. Contact customer
support at 309-278-5303 or [email protected]om. Please note: For items
ordered in error or no longer needed, the return shipping charges will
be at the buyer’s expense.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS
REQUIRED.
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP
PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART
OF TV OR TV CART.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK
OF TIPOVER.
TIPOVER WARNING
WEIGHT CAPACITY
DO NOT EXCEED WEIGHT CAPACITY. Failure to do so may result in serious injury.
33lbs
(15kg)
!

4
PACKAGE CONTENTS
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
A (x1)
Desk Riser
B(x2)
Foot
Extension
C(x2)
Keyboard
Bracket
D (x1)
Keyboard
Tray
S-A (x10)
M5x10
S-B (x1)
Cable Clip
S-C (x2)
Zipties
Please consult the parts list below and ensure you have everything you need to assemble
your product. If parts are missing or damaged, please contact us.
Phillips Screwdriver
|
TOOLS NEEDED:
DIFFICULTY LEVEL
Scissors

5
STEP 1: Open Packaging
Carefully remove the Desk Riser (A) from the packaging.
ASSEMBLY STEPS
WARNING: Impact Hazard!
Moving Parts can Crush and Cut!
A
A (x1)
Desk Riser
STEP 2: Install Feet Extensions
Flip Desk Riser (A) upside down, then attach Feet Extensions (B) to the frame using
M5x10mm Screws (S-A).
A
S-A
B(x2)
Foot
Extension
S-A (x10)
M5x10

6
STEP 3: Raise Desk Riser
Press the handles on each side and li Desk Riser (A).
A
Mount Keyboard Brackets (C) to Keyboard Tray (D) using M5x10mm screws (S-A).
S-A
DC
STEP 4: Mount Keyboard Brackets
C(x2)
Keyboard
Bracket
D (x1)
Keyboard
Tray
S-A (x10)
M5x10

7
Place monitor, laptop and other items on desk surface.
Hang assembled keyboard tray onto pre-installed knobs, and tighten knobs to secure.
NOTE: Make sure the keyboard brackets are curving towards the user, not towards the
inside of the desk.
STEP 5: Install Keyboard Tray
STEP 6: Place Items on Desk Riser

8
Attach Cable Clip (S-B) to desk to manage keyboard and mouse cables.
Manage cables using Zip Ties (S-C).
S-B
S-C
STEP 7: Install Cable Clip
S-B (x1)
Cable Clip
S-C (x3)
Zipties
STEP 8: Manage Cables

9
If locks are not releasing properly to change desk height, adjust the position of the black
tube containing the steel release cable. Turn the nuts at the end of the tube just behind the
handle as shown, moving the tube away from the handle until the cable once again has
proper tension, then tighten the nuts.
STEP 9: Adjust Height

10
3
CHECK OUT OTHER GREAT PRODUCTS FROM
EXPLORE MORE AT VIVO-US.COM
WHO WE ARE
VIVO is more than a brand of ergonomic oice furniture. We are a team of
creative and innovative indivuduals working together to oer high quality,
aordable ergonomic solutions. We think and work outside of the box to serve
you, our customer, to the best of our abilitiy.
We oer a wide array of home & oice products
to fit your needs. From height adjustable desks to
monitor mounts to keyboard trays and more!
HEIGHT
ADJUSTABLE DESKS
MONITOR
MOUNTS
SPEAKER MOUNTS
& STANDS
We oer electric & manual
crank standing desks,
corner frames, desk & top
combos, and more!
From single monitor
mounts to hex mount,
gromment or clamp-ons,
we’ve got a mounting
solution for your setup.
Whether you’re mounting
a soundbar or surround
sound system, we’ve got
a mounting solution to fit
your needs.