Vivo CART-E1TB User manual

Black Electric Mobile Overbed Table
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-e1tb
SKU: CART-E1TB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Desktop
B (x1)
Liing
Column
C (x1)
Base
D (x1)
Power Cable
E (x1)
Extension Cable
S-A (x8)
M6x16
Screw
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
ASSEMBLY STEPS
STEP 1
Secure Liing Column (B) to Desktop (A) using M6x16 Screws (S-A) and tighten using 4mm Allen
Wrench (T-A).
S-B (x3)
Cable Clip
T-A (x1)
4mm Allen
Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
44lbs
(20kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
C
B
D
E
A
A
B
S-A
T-A
Phillips
Screwdriver
TOOLS NEEDED

3
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
STEP 2
Mount Base (C) to Liing Column (B) using M6x16 Screws (S-A). Tighten using 4mm Allen Wrench (T-A).
B
S-A
T-A
STEP 3
Connect one end of Extension Cable (E) to the control panel located on Desktop (A) and attach the
other end to the AC adapter. Connect the AC adapter cable from the control panel to the corresponding
AC adapter cable, then close the locking tab. Plug Power Cable (D) into the AC adapter and the other
end into an AC power outlet.
C
STEP 4
If you would like the control panel to be on the other side of the desk, using a Phillips screwdriver,
remove the two Phillips screws holding down the control panel. Then reinstall it onto the mounting
holes on the other side of the Desktop (A). Use the Cable Clips (S-B) to tidy up any loose cables.
E
AC Adapter
Cable
Control
Panel
D
A
AC
Adapter
Phillips
Screws
A

LAST UPDATED: 06/24/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303