Vivo MOUNT-KB05GL User manual

Black Clamp-on Height Adjustable Keyboard Tray
with RGB Lights
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb05gl
SKU: MOUNT-KB05GL
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
STEP 1
STEP 2
Assemble Slider Brackets (C) to Support Brackets (B) using M4x7mm Flat Head Screws (S-A). Tighten
with a Phillips screwdriver.
Assemble Slider Brackets (C) to Keyboard
Tray (A) using M5x12mm Screws (S-B),
and tighten with a Phillips screwdriver.
The slider brackets should protrude from
the back of the keyboard tray
PACKAGE CONTENTS
TOOLS NEEDED
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A(x1)
Keyboard Tray
B(x2)
Support Bracket
D (x2)
Clamp
C(x2)
Slider Bracket
E(x2)
Pad
S-A (x6)
M4x7mm Flat
Head Screw
S-B (x8)
M5x12mm
Screw
S-C (x6)
M5x8mm Flat
Head Screw
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
C
A
S-B
C
B
S-A

3
STEP 3
STEP 4
STEP 5
Assemble Clamps (D) to Support Brackets (B) at desired height using M5x8mm Flat Head Screws (S-C).
Tighten with a Phillips screwdriver.
B
Place Pads (E) on the underside of each Clamp (D). Place assembled keyboard mount on the edge of
desktop and tighten Clamps (D).
To ensure the keyboard tray assembly is level, do not over-tighten Clamps (D). Slide Keyboard Tray (A)
forward/back to desired position. Plug the cable from Kayboard Tray (A) into a 5V USB power supply.
Desktop
Desktop
D
A
E
D
D
S-C

LAST UPDATED: 12/21/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303