Vivo DESK-TOP1N User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
SKU: DESK-TOP1N
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Vintage Brown 63” x 32” Table Top
https://vivo-us.com/products/desk-top1b

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
Phillips
Screwdriver
B (x1)
Middle Panel
A (x1)
Le Panel
C (x1)
Right Panel
S-A (x30)
5/8" Screw
D (x4)
Support Bar
E (x3)
Cable Management
Cover
S-B (x6)
Wooden
Dowel Pin
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: CHOKING HAZARD
TOOLS NEEDED

3
ASSEMBLY STEPS
STEP 1
B
CBA
S-B
Place Desktop Panels (A, B, C) upside down on a protective surface and insert Wooden Dowel Pins
(S-B) into Middle Panel (B). Connect Le Panel (A) and Right Panel (C) to Middle Panel (B) using
Wooden Dowel Pins (S-B).
B
S-B

STEP 2
4
D
S-A S-A
D
Attach Support Bars (D) to desktop assembly using 5/8” Screws (S-A) and a phillips screwdriver.

STEP 3
5
S-A
S-A
OPTION A: Mounting to an Electric Height Adjustable Desk Base
Place electric height adjustable desk frame upside down on the desktop assembly. Adjust frame width
to match desktop mounting holes, and secure frame to desktop assembly using 5/8” Screws (S-A).
Mount the control panel to mounting holes on le or right side of the desktop assembly using 5/8”
Screws (S-A) included with the desktop.
NOTE: If using a compatible VIVO desk frame, do NOT use the 3/4” screws included with the frame. Use
only the 5/8” Screws (S-A) included with this desktop.

STEP 3 (Continued)
6
S-A
S-A
OPTION B: Mounting to a Manual Height Adjusable Desk Base
Place manual height adjustable desk frame upside down on desktop assembly, making sure the crank
gearbox is on the same side as crank mounting holes in the desktop assembly. Adjust frame width to
match desktop assembly mounting holes, and secure frame to desktop assembly using 5/8” Screws
(S-A). Align crank support with mounting holes in desktop assembly and secure using 5/8” Screws
(S-A).
NOTE: If using a compatible VIVO desk frame, do NOT use the 7/8” screws included with the frame.
Use only the 5/8” Screws (S-A) included with this desktop.

STEP 4
7
E
E
Insert Cable Management Covers (E) into the holes located on top of the desktop assembly.

LAST UPDATED: 06/14/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303