Vivo DESK-E-T55B User manual

Black 2 Tier 55" x 28" Electric Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-e-t55b
SKU: DESK-E-T55B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING!
PACKAGE CONTENTS
A (x1)
Leg with Motor
B x1)
Leg
C(x1)
Desk Crossbar
D(x2)
Foot
E(x1)
Desktop
F(x1)
Shelf
G (x1)
Right Side Bracket
H x1)
Le Side Bracket
I(x2)
Shelf Bracket
J(x1)
Sync Rod
K(x1)
Shelf Crossbar
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
L (x4)
Foot Pad
M x1)
Control Panel
N(x1)
AC Adapter
S-A (x10)
M6x12 Screw
S-B (x4)
M8x47 Screw
S-C (x6)
M6x10 Flat
Head Screw
S-D x6)
M6x10 Socket
Head Screw
S-E (x26)
M5x14 Screw
S-F (x2)
Cable Clip
S-G (x18)
Anti-Vibration
Pad
T-A (x1)
2mm Allen
Wrench
T-B (x1)
4mm Allen
Wrench
T-C (x1)
5mm Allen
Wrench

3
176lbs
(80kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver Drill
Level
TOOLS NEEDED
ASSEMBLY STEPS
STEP 1
Secure Desk Crossbar (C) to Leg With Motor (A) and Leg (B) using M8x47 Screws (S-B) and 5mm Allen
Wrench (T-C).
C
A
B
S-B
T-C

4
STEP 3
Secure Le Side Bracket (H) to Leg (B) and Right Side Bracket (G) to Leg with Motor (A) using M6x10
Flat Head Screws (S-C) and 4mm Allen Wrench (T-B).
Mount Feet (D) to Leg With Motor (A) and Leg (B) using M6x12 Screws (S-A) and 4mm Allen Wrench (T-B).
Thread Foot Pads (L) into Feet (D).
D
A
B
T-B
S-A
L
STEP 2
CG
H
B
A
S=4mm
F
T-B
S-C

5
T-A
Loosen the nut on Sync Rod (J) and insert the hex rod end into Leg (B). While holding the hex end, pull
the larger rod out until the connector engages with Leg With Motor (A). Tighten the set screw on Sync
Rod (J) using 2mm Allen Wrench (T-A), then tighten the nut. Insert Anti-vibration Pads (S-G) into the
assembled frame and Shelf Brackets (I).
STEP 4
STEP 5
Secure frame assembly and Control Panel (M) to the Desktop (E) using M5x14 Screws (S-E). Note that
the back hole on each side bracket will not be used. Attached the Shelf Crossbar (K) and Shelf Brackets
(I) to the Shelf (F) using the M5x14 Screws (S-E). Tighten all screws using a Phillips Screwdriver.
S-G
J
I
M
S-E
S-E
S-E
I
F
E
K

6
STEP 6
With the desk cafully flipped over, loosely install M6X10 Socket Head Screws (S-D) into the back of
Desk Crossbar (C) using 4mm Allen Wrench (T-B). Note, leave about 3mm (1/8") of thread showing.
3mm
(1/8")
STEP 7
Determine the desired height of the shelf. Install the shelf assembly by sliding the Shelf Brackets (I)
over the previously installed M6x10 Socket Head Screws (S-D). Then fully tighten using 4mm Allen
Wrench (T-B).
S-D
I
T-B
T-B
S-D

7
STEP 8
Connect Control Panel (M) to Leg With Motor (A) and AC Adapter (N). Plug AC Adpater (N) into an AC
electrical outlet. If necessary, adjust Foot Pads (L) to level the desk. Manage cables using Cable Clips
(S-F).
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
CAUTION!
N
S-F
M
L
A

LAST UPDATED: 02/24/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303