Vivo CART-V07B User manual

Black 32” Mobile Presentation Cart
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-v07b
SKU: CART-V07B
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
S-A (x4)
M6x12mm Screw
S-B (x11)
M5x12mm Screw
S-C (x8)
M6x16mm Screw
T-A (x1)
4mm Allen Wrench
T-B (x1)
Wrench
F (x4)
Casters
H (x2)
Cable Clip
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualied technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specied in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
ASSEMBLY STEPS
B (x1)
Desktop
D(x1)
Support
Bracket
C (x1)
Base
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
22lbs
(10kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
STEP 1
Assemble the Support Bracket (D) to the leg (A) using M6x12mm
Screws (S-A) and tighten with 4mm Allen Wrench (T-A).
Note: The beveled edge of the support bracket should be aligned with
the front of the leg.
A(x1)
Leg
G (x2)
Plastic
Bushing
E (x1)
Base Support
Bracket
Front
Beveled Edge
A
D
S-A
T-A

3
STEP 2
Install the Base Support Bracket (E) to the top
of Base (C) with M6x16mm Screws (S-C). Press
Plastic Bushings (G) into the openings in Base
(C) and Base Support Bracket (E). Assemble Base
(C) to Leg (A) using M6x16mm Screws (S-C), then
tighten all screws with 4mm Allen wrench (T-A).
Place Desktop (B) upside down on a at surface.
Assemble Support Bracket (D) to Desktop (B)
using M5x12mm Screws (S-B) and tighten
with the Phillips end of 4mm Allen Wrench
(T-A). Mount the handle to Desktop (B) using
M5x12mm Screws (S-B).
STEP 3
STEP 4
Carefully turn the assembled cart right side up.
Li the handle to raise and lower the desktop.
Screw the Casters (F) into Base (C), and tighten
using Wrench (T-B). Install Cable Clips (H)
to the underside of Desktop (B) to secure the
handle cable.
STEP 5
B
D
S-B
S-B
T-A
E
C
S-C
S-C
T-A
G
G
T-A
A
F
C
T-B
B
H

LAST UPDATED: 02/16/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303