Vivo Black 47 Pneumatic Desk DESK-V048GB User manual

Black 47” Pneumatic Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v048gb
SKU: DESK-V048GB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
WARNING!
TOOLS NEEDED
Phillips
Screwdriver
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
33lbs
15kg
Level
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1)
Column Set
B (x1)
Stabilizer Bar
D (x1)
Desktop
E (x2)
Foot
F(x18)
M6x10 Bolt
H (x1)
4mm Allen
Wrench
C (x1)
Support Frame
G (x8)
M6x14 Bolt
NOTE: To prevent possible injury
or damage to equipment and your
surroundings, never press or use the
release paddle during installation.

3
Place the support frame (C) upside down on a flat surface. Insert the column set (A) into the support
frame as shown, and secure using eight M6x10 bolts (F) with the 4mm Allen wrench (H). The
mounting plates on the columns should be facing towards the back of the frame (arrows on sides of
frame indicate front).
ASSEMBLY STEPS
STEP 1
Shorter Wire
A
C
FH

4
STEP 2
Assemble the feet (E) to the columns using M6x10 bolts (F), making sure the long ends of the feet are
facing towards the front of the frame. Tighten with the Allen wrench (H).
F
E

5
STEP 3
Loosen the bolts on the back of the columns so at least 5mm of thread is exposed. Hang the stabilizer
bar (B) over the bolts and secure with M6x10 bolts (F). Tighten all bolts with the Allen wrench (H).

6
STEP 4
Place the desktop (D) on the assembled frame. Secure the desktop using M6x10 bolts with a
Phillips screwdriver, then secure the release paddle using M6x14 bolts (G).
3
STEP 5
Li the release paddle to raise or lower the desktop.
G
G
D

7
3
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk weight limit. Keep area of vertical motion free of
obstacles.
Keep weight on desk balanced for
correct operation and longer life of
components.
Leave enough slack in cables to
allow for full range of vertical
motion.
STEP 5 (Continued)
If the release paddle is loose,
tighten the knob in back until the
desk is able to adjust when the
paddle is lied. Tighten the nut
against the knob to prevent the
knob from loosening.
1
3 4
2

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303