Vivo DESK-V000S User manual

Black 32” Desk Riser
Instruction Manual
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/desk-v000s
SKU: DESK-V000S
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
33lbs
(14.97kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Cut the large plastic tie beneath the adjustable desk (A). Install the
rubber feet (G) to the bottom of the desk.
WARNING!
A (x1)
Adjustable
Desk
B(x1)
Keyboard
Tray
C(x1)
Cable Guide
D (x4)
Sleeve Nut with
Screw
TOOLS NEEDED
Scissors
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Phillips
Screwdriver
DESKTOP
4.4lbs
(2kg)
KEYBOARD TRAY
E (x2)
Cable Clip
F(x2)
Pad
G(x4)
Rubber Feet
H (x2)
Screw
STEP 2
Raise the desk by squeezing the handle on the
right side of the desk.
Do not press the release
handle while cutting o the
plastic strip lock.

3
STEP 4
Place keyboard, monitor and other items on top of the desk.
STEP 6
Separate the sleeve nuts (D) into D1 and D2,
then press nuts (D1) into holes on the top of the
keyboard tray (B). Place the keyboard tray on
the metal brackets on the desk (A), secure using
screws (D2) and tighten with a Phillips screw-
driver.
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
STEP 5
Apply cable clips (E) to the underside of
the desk for cable management.
STEP 3
Install the cable guide (C) to the bottom of the
keyboard tray (B) using screws (H). Apply pads
(F) to the underside of the keyboard tray.

LAST UPDATED: 03/27/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303