Vivo STAND-PAD1 User manual

Anti-theft Kiosk for Apple iPad Pro
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-pad1
SKU: STAND-PAD1
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
A (x1)
Anti-the Box
B(x1)
Pole
C(x1)
Base
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
D(x4)
Rubber Pad
E(x1)
Decorative Cover
F (x2)
6.3x55
G (x2)
Concrete Anchor
H (x1)
Key
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
I(x4)
M5x6
J(x4)
M8x20
K (x1)
4mm Allen
Wrench
L (x1)
6mm Allen
Wrench
M (x1)
Button

3
ASSEMBLY STEPS
STEP 1
Attach rubber pads (D) to underside of base (C).
STEP 2
Slide decorative cover (E) onto pole (B). Then, attach base (C) to pole (B) using screws (J) and 6mm
allen wrench (L).
D
B
E
C
J
L

4
STEP 3
OPTION A: Floor Stand
For free standing use, simply place the mount on the floor.
OPTION B: Wood Floor Installation
Place stand in desired location and li cover (E). Use pencil to mark drilling locations. Drill 2.2”
(55mm) deep holes using 3/16” (4.5mm) drill bit, then use 6.3x55 screws (F) to secure base to floor.
Replace cover (E).
F
X

5
STEP 3 (Continued)
OPTION C: Concrete/Brick Installation
Place stand in desired location and li cover (E). Use pencil to mark drilling locations. Drill 2.4” (60mm)
deep holes using 3/8” (10mm) drill bit, press concrete anchors (G) into holes, then use 6.3x55 screws
(F) to secure base to floor. Replace cover (E).
STEP 4
Attach anti-the box (A) to pole (B) using M5x6 screws (I), making sure the lock is facing down for
correct orientation.
F
G
I

6
STEP 5
STEP 7
Place 12.9” iPad Pro in anti-the box (A) and connect
charging cable.
STEP 6
Attach anti-the box cover by hooking latches into slots on the top of the box.
Lock anti-the box (A) with key (H). Adjust tilt and rotation with 4mm allen key (K).

7
For accessible Home button, use rubber button pre-installed in the anti-the box cover. For
inaccessible Home button, remove the rubber button and replace with the plastic button (M). Please
note that the button should be installed on the inside of the box cover.
STEP 8
H
K
Adjust as Desired

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303