Vivo MOUNT-HP02M User manual

VESA Adapter for Compatible HP M-Series Monitors
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-hp02m
SKU: MOUNT-HP02M
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
PACKAGE CONTENTS
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualied technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specied in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A (x1)
VESA Adapter
S-A (x4)
M4x5mm
Screw
STEP 1
Install the appropriate Adapter (B or C) for your
monitor to the front of VESA Adapter (A) using
M4x5mm Screws (S-A) and tighten with a Phillips
screwdriver.
S-B (x2)
M4x12mm
Screw
S-D (x4)
M4x12mm
Thumbscrew
S-C (x2)
M4 Caps
B (x1)
F Model Connector
C (x1)
FWA Model Connector
S-E (x1)
M3x8mm
Screw
S-F (x4)
M4 washer
STEP 2
Insert the M4x12mm Screws (S-B) half-way into
the back of the VESA Adapter (A).
B
C
A
S-A
S-B
A

3
STEP 3
STEP 5
Install VESA Adapter (A) with monitor to
the VESA monitor mount using M4x12mm
Thumbscrews (S-D) with M4 Washers (S-F)
NOTE: For some larger monitors, use
x2 washers with each of the lower
Thumbscrews and no washers with the
upper Thumbscrews). Tighten M4x12mm
Screws (S-B) to reduce potential monitor
wobble.
Place M4 Caps (S-C) onto the ends of the
M4x12mm Screws (S-B).
STEP 4
Remove the small Phillips screw from the back of
the monitor's attachment post. Press assembled
VESA Adapter (A) onto the back of the monitor
until the latch is engaged, then secure using
M3x8mm screw (S-E).
S-C
S-BS-B
A
S-E
A
S-D
S-F
S-B

LAST UPDATED: 01/10/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303