Vivo STAND-V100W User manual

White Single Monitor Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v100w
SKU: STAND-V100W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Pole
B(x1)
VESA Plate
C(x1)
Base
M-E (x4)
D5 Washer
M-F (x4)
Spacer
M-D (x4)
M5x16
M-A (x4)
M4x12
M-B (x4)
M4x16
M-C (x4)
M5x12
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE MAY NOT BE USED
D(x1)
Cable Clip
E(x2)
M6x12
F (x1)
Thumbscrew
G(x1)
4mm Allen Key
H (x1)
6mm Allen Key
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
TOOLS NEEDED
13.2lbs
(5.99kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
Install height adjustable pole (A) to base (C) with bolts (E), and tighten with 4mm Allen wrench (G).
Attach cable clip (D) to pole.
A
E
C
G
D

4
STEP 2
OPTION A: Flat Back Monitor
Install VESA plate (B) to monitor using bolts (M-A) or (M-C) and washers (M-E).
OPTION B: Curved Back Monitor
Install VESA plate (B) to monitor using bolts (M-B) or (M-D), washers (M-E), and
spacers (M-F).
M- E
B
M- A
M- C
TV
TV
TV
TV
TV
TV
M- E
B
M- F
M- B
M- D

5
STEP 3
Slide the monitor onto the head of height adjustable pole (A). Install thumb screw
(F). Make sure the screw is installed before you rotate the monitor.
STEP 4
If needed, use 6mm Allen wrench (H) to adjust the bolt on the side of the hinge behind the VESA plate
to tighten or loosen the tilt angle.
F
H

6
STEP 5
Use cable clip (D) to store Allen wrenches (G, H) for later use.
G
H

7
STEP 6
Adjust the height and angle of monitor. To reset height, raise all the way to maximum height to
release the internal latch, and gently lower to bottom position.
+60°
-20°
60°
360°
32cm-50cm

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303