Vivo MOUNT-KB5SP User manual

Black Height Adjustment Kit for Keyboard Tray
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-kb5sp
SKU: MOUNT-KB5SP
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
PACKAGE CONTENTS
WARNING!
TOOLS NEEDED
Phillips
Screwdriver
A (x10)
M4x7
B(x2)
Support Bracket
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
STEP 1
Assemble support brackets (B) to the
slider brackets (D) using M4x7 screws (A).
Ensure the screws are installed into the
counter-sunk holes of the support brackets
for proper fit. Tighten with a Phillips
screwdriver.
11lbs
(5kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PACKAGE CONTENTS (NOT INCLUDED)
C (x1)
Keyboard Tray
D (x2)
Slider Bracket
E (x2)
Clamp
F (x2)
Pad
G (x8)
M5x12
D
D
B
B
A
A
STEP 2
Assemble slider brackets (D) with support
brackets (B) to the keyboard tray (C) using
M5x12 screws (G), and tighten with a
Phillips screwdriver. The support brackets
(B) must be on the opposite end from the
center cable guide.
C
G
G
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED

3
STEP 3
Assemble clamps (E) to support brackets (B) at desired height using M4x7 screws (A).
Tighten with a Phillips screwdriver.
STEP 4
Place pads (F) on the underside of each clamp. Place assembled keyboard mount on edge
of desk and tighten clamps. To change tray height, remove M4x7 screws (A) from clamps
(E), then reinstall while holding keyboard tray at the desired height.
NOTE: To ensure keyboard tray is level, do not over-tighten clamps.
STEP 5
Place keyboard, mouse or other items on the keyboard tray. Slide keyboard tray forward/
back to the desired position.
E
E
A
A
Right
Left
Desktop
F
Desktop

LAST UPDATED: 01/22/2021
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303