Vivo MOUNT-HHCT1 User manual

Hydraulic Hinges for Coffee Table (x2)
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-hhct1
SKU: MOUNT-HHCT1
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x2)
Hydraulic Hinge
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
ASSEMBLY STEPS
STEP 1
100 lbs
(50kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
TOOLS NEEDED
Phillips
Screwdriver
Place Hydraulic Hinges (A) inside of the coee table so that the top mounting bracket is flush with the
top of the table. Measure the distance from the font of the hinges to the inside edge to make sure both
hinges are even. Open both hinges and mark mounting holes using a pencil.
A
Coee Table
Drill Pencil

3
STEP 2
Predrill marked mounting holes using a drillbit based on the appropriate mounting hardware for your
coee table. Secure Hydraulic Hinges (A) to the coee table using the appropriate mounting hardware
and a Phillips screwdriver.
A
STEP 3
Close Hydraulic Hinges (A) and mark the coee table on either side of the top bracket using a pencil.
A
STEP 4
Place the coee table lid on the coee table and mark the lines from the coee table onto the lid.
Extend Hydraulic Hinges (A) and place the coee table lid on top so that the marked lines line up with
the top brackets. Mark mounting holes using a pencil. Remove the lid and predrill marked mounting
holes using a drillbit based on the appropriate mounting hardware for your coee table. Secure the lid
to Hydraulic Hinges (A) using the appropriate mounting hardware and a Phillips screwdriver.
Lid
Coee Table
Coee Table
Coee Table
Lid
Coee Table
Lid
Coee Table
A

LAST UPDATED: 06/20/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303