2 3
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS
A (x1)
Mount
B(x1)
Bracket
D(x1)
Ceiling Plate
TOOLS NEEDED
Phillips
Screwdriver
Drill
E(x1)
Y-Cable with
Lock
C (x2)
Clip
Remove plastic plug from Ceiling Plate (D).
F (x2)
D6 Washer
G(x2)
M6x18mm
H (x1)
5mm Allen
Wrench
M-A (x4)
M3x8
M-B (x4)
M4x10
M-C (x4)
M5x10
M-D (x4)
M6x10
M-E (x4)
D3 Washer
M-F (x4)
D4 Washer
M-G (x4)
D5x12 Washer
29.7 lbs
(13.5 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
STEP 2
Insert toggles at end of Y-Cable (E) into 2 of the 16 slots on the top of the Ceiling Plate, making sure
the slots chosen will provide optimal support for the mount with projector. Place Ceiling Plate into
suspended-ceiling grid. Thread end of cable through the side hole in the lock in the direction of the
arrow, wrap cable around beam or other support, then insert cable down through center hole in lock
and pull down to secure.
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR CEILING CONSTRUCTION. USE WOOD STUDS
TO MOUNT. We include mounting for brick and concrete. If unsure, please contact us at vivo-us.com,
M-H (x4)
D6 Washer
M-I (x2)
M5x12
M-J (x2)
D5x10 Washer
M-K (x2)
D5 Plastic
Washer
M-L (x1)
4mm Allen
Wrench
W-A (x4)
Screw
W-B (x4)
Anchor
W-C (x4)
Washer